Siemens Gigaset 4170 User manual

Entrance telephone configuring Gigaset 4170 4175 isdn
file:///I|/docs/English/DP/Bedienprozeduren/g4170_turspr_stell_einricht_eng.htm[10.02.2010 15:46:55]
How do I configure the entrance telephone?
1. Open the menu, press control key (on the dark displayed side).
2. Select "Base Settings", press control key and confirm with
display key .
3. Select "Settings" with display key or . Confirm with display key
.
4. Select "Setup user" with display key or . Confirm with display
key .
5. Confirm "Setup device" with display key .

Entrance telephone configuring Gigaset 4170 4175 isdn
file:///I|/docs/English/DP/Bedienprozeduren/g4170_turspr_stell_einricht_eng.htm[10.02.2010 15:46:55]
6. Select internal subscriber (21 or 22) with display key or .
Confirm with display key
7. Select a device type with display key or . Confirm with display
key .
8. Select "Door type1 " or "Doortype2 (DTMF)" with display key or
. Confirm with display key .
Door type 1: this configuration is only applicable for entrance
telephones in accordance with FTZ (door opener via ring
current).
Door type 2: E.g. Deutsche Telekom DoorLine products.