SitOnit Seating Parallon User manual

Parallon
FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Everything to the table.
When you want cohesion in spaces large, small, shared or separate, there’s
Parallon. It’s a single collection with a singular look, oering an array of
choices for a variety of environments—and all the features to t.
Ensure design is never a distraction in the places where everyone needs to
focus. Our Parallon line of training tables provides a unied and streamlined
look from room to room.
C6568 Rev B |www.sitonit.net |1

2 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Read the entire instruction manual before you start installation and
assembly. If you have any questions regarding any of the instructions or
warnings, please contact your local distributor for assistance.
To report any issues with this product, contact our customer experience
team at: [phone] or [email protected].
CAUTION
Failure to follow instructions could result in product failure or
potential injury.
Do not apply sudden weight to table.
Do not exceed 200 lb static load weight capacity.
Keep ngers clear of pinch points.

C6568 Rev B |www.sitonit.net |3
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
• Non-MarringMallet/Hammer
• CordlessDrill/Driver
• #3PhillipsBit
• 5⁄32"HexBit
• MagneticBitHolder
• 1⁄2"CombinationWrench
• ¼"or3⁄8"DriveRatchetWrench
• SocketExtension
• FlexSocketAdapter
• ½"HexSocket
Recommended Tools
¼"or3⁄8"DriveRatchetWrench
1⁄2"CombinationWrench
FlexSocketAdapter
1⁄2"HexSocket
SocketExtension
CordlessDrill/Driver
5⁄32"HexBit
#3PhillipsBit
MagneticBitHolder
Non-MarringHammer

4 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
• Tabletop(1)
• TopPlates(2)
• Stiener(1):
60"and72"TabletopsOnly
• EndCap(1):
60"and72"TabletopsOnly
• Grommet(Optional)
• Pack A:
•#12×1"Screw(17)
• Pack C:
•¼"×1"Screw(8)
Tabletop
EndCap
(SomeSizes)
Grommets
(Optional)
#12 x 1"Screws 1⁄4x 1"Screws
PACK A PACK C
Parts: Top and Frame
TopPlates
Stiener
(SomeSizes)

C6568 Rev B |www.sitonit.net |5
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Columns
Casters(Optional)
Parts: Columns and Feet
PACK B
FootAttachmentPlates 5⁄16 x 11⁄2"Bolts
5⁄16"Nuts
Feet
• Column(2)
• Foot(4)
• Caster(4,Optional)
• Pack B:
•5⁄16"×11⁄2"Bolt(4)
•5⁄16"Nut(4)
•FootAttachmentPlate(4)

6 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Attachment Hardware
Tabletop Screws
60" 7
72" 9
#12×1"Screw
Stiener
PilotHole
Step 1: If using a 60" or 72" tabletop, attach the stiener.
#12 x 1"Screw(PackA) MagneticBitHolder
#3PhillipsBit
1:1 HARDWARE TOOLS
Continue to step 3 if using a 48" tabletop.

C6568 Rev B |www.sitonit.net |7
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 2: If using a 60" or 72" tabletop, insert the end cap into the
open side of the stiener.
TOOLS
EndCap
Stiener
Continue to step 3 if using a 48" tabletop.
Non-MarringHammer

8 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 3: Slide the bolt through the foot attachment plate and column.
1:1 HARDWARE
5⁄16 x 11⁄2"Bolt(PackB)
FootAttachmentPlate
5⁄16 x 11⁄2"Bolt
Column
Hole
This step is repeated on each foot.

C6568 Rev B |www.sitonit.net |9
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 4: Slide the foot over the bolt.
Column
5⁄16 x 11⁄2"Bolt
Foot
This step is repeated on each foot.

10 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 5: Hold the bolt in place and tighten the nut.
1:1 HARDWARE TOOLS
Nut
5⁄16Nut(PackB) ¼"or3⁄8"DriveRatchetWrench
1⁄2"CombinationWrench
SocketExtension
FlexSocketAdapter
1⁄2"HexSocket
This step is repeated on each foot.

C6568 Rev B |www.sitonit.net |11
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 6: Attach the top plates to the columns.
1:1 HARDWARE TOOLS
5⁄32HexDrillBit 1⁄4x 1"Screw(PackC)
Column
Align the top
support and feet.
1⁄4"x 1"Screw
TopPlate

12 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 7: Attach the leg assemblies to the tabletop.
TopPlate
#12 x 1"Screw
PilotHole
#12 x 1"Screw(PackA) #3PhillipsBit
1:1 HARDWARE TOOLS

C6568 Rev B |www.sitonit.net |13
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
TOOLS
1⁄2"CombinationWrench
Step 8: Unscrew the glides to level as needed.
Alternatively, insert the optional casters into the feet and tighten the nuts.
Caster
Nut
Brake
Install the two casters
with brakes on the same
side as the pull handles.
Glide

14 |C6568 Rev B |www.sitonit.net
Parallon FIXED TOP TABLE ASSEMBLY INSTRUCTIONS
Step 9: Turn the table upright with the help of another person and if
applicable, press the optional grommets into the cutouts.
Grommet
Cutout