SitOnit Seating Parallon MEETING User manual

Parallon
MEETING, CAFÉ AND OCCASIONAL DISC-BASE
TABLE ASSEMBLY INSTRUCTIONS
C6621 Rev A |www.sitonit.net |1
Everything to the table.
When you want cohesion in spaces large,
small, shared or separate, there’s Parallon.
It’s a single collection with a singular look,
oering an array of choices for a variety of
environments—and all the features to t.
Ensure design is never a distraction in the
places where everyone needs to focus. Our
Parallon line of cafe and occasional tables
provides a unied and streamlined look from
room to room.

2 |www.sitonit.net |C6621 Rev A
Parallon MEETING/CAFÉ/OCCASIONAL TABLE ASSEMBLY INSTRUCTIONS
Failure to follow instructions could result in product failure or
potential injury.
Do not apply sudden weight to table.
Do not exceed 200 lb static load weight capacity.
• Cordless Drill/Driver
• #3 Phillips Bit
• 5⁄32" Hex Bit
• 1⁄2" Hex Socket, 1⁄4" Drive
• Hex Shank to ¼" Square Drive Adapter
Recommended Tools
Cordless
Drill/Driver
5⁄32" Hex Bit
#3 Phillips Bit
Hex Shank to
1⁄4" Square Drive Adapter
1⁄2" Hex Socket,
1⁄4" Drive
CAUTION
Read the entire instruction manual before you start installation and
assembly. If you have any questions regarding any of the instructions or
warnings, please contact your local distributor for assistance.
To report any issues with this product, contact our customer experience
team at: [phone] or [email protected].

C6621 Rev A |www.sitonit.net |3
Parallon MEETING/CAFÉ/OCCASIONAL TABLE ASSEMBLY INSTRUCTIONS
Cordless
Drill/Driver
• Tabletop (1, round, square,
racetrack or rectangular)
• Top Plate (1)
• Column (1)
• Disc Base (1)
• Pack A:
•#12 × 1" Screw (8)
• Pack B:
•5⁄16" × 1½" Bolt (2)
• Pack C:
•¼" × 1" Screw (4)
#12 x 1" Screws
PACK A
¼" × 1" Screw
PACK C
Parts
Column
Top Plate
PACK B
5⁄16" × 1½" Bolt
Disc Base
Round
Tabletop
Rectangular
Tabletop
Square
Tabletop
OR
OR
OR
Racetrack
Tabletop
(Double all component parts for racetrack and rectangular tabletops.

4 |www.sitonit.net |C6621 Rev A
Parallon MEETING/CAFÉ/OCCASIONAL TABLE ASSEMBLY INSTRUCTIONS
1:1 HARDWARE TOOLS
Step 1: Attach the top plate to the column.
5⁄32 Hex Drill Bit 1⁄4"x 1" Screw (Pack C)

C6621 Rev A |www.sitonit.net |5
Parallon MEETING/CAFÉ/OCCASIONAL TABLE ASSEMBLY INSTRUCTIONS
Step 2: Attach the column assemby to the tabletop.
#12 x 1" Screw (Pack A) #3 Phillips Bit
1:1 HARDWARE TOOLS
Pilot Hole

6 |www.sitonit.net |C6621 Rev A
Parallon MEETING/CAFÉ/OCCASIONAL TABLE ASSEMBLY INSTRUCTIONS
Step 3: Attach the disc base to the column.
1:1 HARDWARE TOOLS
5⁄16 x 11⁄2" Bolt (Pack B)
1⁄2" Hex Socket, ¼" Drive
Hex Shank to Square Drive Adapter

C6621 Rev A |www.sitonit.net |7
Parallon MEETING/CAFÉ/OCCASIONAL TABLE ASSEMBLY INSTRUCTIONS
Step 4: Turn the table upright with the help of another person.
Note: Use packaging to prevent damage to the disc base when turning the
table upright.