SitOnit Seating Modesty Screen User manual

Modesty Screen
FIXED ASSEMBLY INSTRUCTIONS
We all need our own space. Increase oce and employee privacy with our
selection of modesty screens that attach right onto our desks and benches.
In addition, shield cords, wires and more from sight for a clean and organized
workspace.
C6455 Rev C |www.sitonit.net |1

2|www.sitonit.net |C6455 Rev C
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
• Measuring tape
• Pencil
• #2 Phillips Screwdriver
• Cordless Drill/Driver
• #2 Phillips Bit
• 3⁄32" Drill Bit
Recommended Tools
#2 Phillips Screwdriver
Pencil
Measuring Tape
3⁄32" Drill Bit
#2 Phillips Bit
Cordless Drill/Driiver
Read the entire instruction manual before you start installation and assembly. If you
have any questions regarding any of the instructions or warnings, please contact
your local distributor for assistance.
To report any issues with this product, contact our customer experience team at:
[phone] or [email protected].

C6455 Rev C |www.sitonit.net |3
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Parts
Laminate Screens
• Top Bracket (2)
• #10 x 3⁄4" Screw (8)
Acrylic Screens
• Top Bracket (2)
• #10 x 3⁄4" Screw (4)
• #6 Flat Washers (4)
• #6 Hex Nuts (4)
• #6–32 × ¾" Screws (4)
• #6 Split Lock Washers (Discard)
#6 Hex Nuts #6 Flat Washers
#6 Split Lock
Washers (Discard)#6–32 × ¾" Screws
ACRYLIC HARDWARE KIT
Top Brackets
#10 x 3⁄4" Screws

4|www.sitonit.net |C6455 Rev C
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Step 1: Position the brackets with the tabbed sides ush to the back
the screen.
12"
Tabbed Side
On laminate screens the top
brackets should be 12" from each
end of the screen.
Acrylic screens require no
measuring; simply align the top
brackets with the pilot holes.
Back Side of Screen
TOOLS
Measuring Tape

C6455 Rev C |www.sitonit.net |5
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Step 2 (Laminate Only): Mark the position of the top brackets and drill
½" deep pilot holes.
TOOLS
Pencil 3⁄32" Drill Bit

6|www.sitonit.net |C6455 Rev C
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Step 3 (Laminate): Attach the top brackets to the modesty screen.
TOOLS1:1 HARDWARE
#10 × 3⁄4" Screw #2 Phillips Bit
Back Side of Screen

C6455 Rev C |www.sitonit.net |7
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Step 3 (Acrylic): Attach the top brackets to the modesty screen.
Front Side of Screen
Back Side of Screen
1:1 HARDWARE
#6–32 × ¾" Screw#6 Flat Washer #6 Hex Nut

8|www.sitonit.net |C6455 Rev C
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Step 4: Position the screen over the underside of the tabletop. Mark the
position of the top brackets and drill ½" deep pilot holes.
Pencil 3⁄32" Drill Bit
TOOLS

C6455 Rev C |www.sitonit.net |9
Modesty Screen FIXED ASSEMBLY INSTRUCTIONS
Back Side of Screen
Underside of Table Surface
#10 x 3⁄4" Screw #2 Phillips Bit
TOOLS1:1 HARDWARE
Step 5: Attach the top brackets to the underside of the tabletop.

Modesty Screen
HINGED ASSEMBLY INSTRUCTIONS
We all need our own space. Increase oce and employee privacy with our
selection of modesty screens that attach right onto our desks and benches.
In addition, shield cords, wires and more from sight for a clean and organized
workspace.
C6455 Rev C |www.sitonit.net |10

C6455 Rev C |www.sitonit.net |11
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Laminate Screens
• Top Bracket (2)
• #10 x 3⁄4" Screw (8)
Acrylic Screens
• #6 Flat Washers (4)
• #6 Hex Nuts (4)
• #6–32 × ¾" Screws (4)
• #6 Split Lock Washers (Discard)
Parts
ACRYLIC HARDWARE KIT
#6–32 × ¾" Screws #6 Flat Washers
#6 Split Lock
Washers (Discard)
#10 x 3⁄4"
#6 Hex Nuts
Top Brackets
Bottom Brackets

12 |www.sitonit.net |C6455 Rev C
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Step 1: Position the bottom brackets so that they're ush with the back
of the screen.
Back Side of Screen
12"
On laminate screens the top
brackets should be 12" from each
end of the screen.
Acrylic screens require no
measuring; simply align the top
brackets with the pilot holes.
Measuring Tape
TOOLS

C6455 Rev C |www.sitonit.net |13
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Back Side of Screen
TOOLS
Pencil 3⁄32" Drill Bit
Step 2 (Laminate Only): Mark the position of the top brackets and drill
½" deep pilot holes.

14 |www.sitonit.net |C6455 Rev C
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Step 3 (Laminate): Attach the bottom brackets to the modesty screen.
TOOLS1:1 HARDWARE
#10 × 3⁄4" Screw #2 Phillips Bit
Back Side of Screen

C6455 Rev C |www.sitonit.net |15
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Step 3 (Acrylic): Attach the bottom brackets to the modesty screen.
Front Side of Screen
Back of the Screen
1:1 HARDWARE
#6–32 × ¾" Screw#6 Flat Washer #6 Hex Nut

16 |www.sitonit.net |C6455 Rev C
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Back Side of Screen
Underside of the Tabletop
Pencil
Detach the bottom brackets from the top brackets before step 5.
TOOLS
Step 4: Attach the bottom brackets through the tabbed side of the top
brackets. Position the bracket assembly on the underside of the table
surface. Mark where the top brackets will attach.

C6455 Rev C |www.sitonit.net |17
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Step 5: Mark the location of the top bracket's holes and drill ½" deep
pilot holes into the underside of the tabletop.
Pencil 3⁄32" Drill Bit
TOOLS
Underside of the Tabletop

18 |www.sitonit.net |C6455 Rev C
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Step 6: Attach the top brackets to the underside of the tabletop.
TOOLS1:1 HARDWARE
#10 × 3⁄4" Screw #2 Phillips Bit
Underside of the Tabletop

C6455 Rev C |www.sitonit.net |19
Modesty Screen HINGED ASSEMBLY INSTRUCTIONS
Step 7: With the tabletop right-side up, hang the screen, inserting the
bottom brackets into the top brackets.
Front Side of Screen
Top of the Tabletop