SitOnit Seating Switchback User manual

Switchback
3-LEG HEIGHT-ADJUSTABLE TABLE
ASSEMBLY INSTRUCTIONS
Find your t.
Achieving the perfect position maximizes ergonomics and minimizes
fatigue or injury. With the press of a button, you can make the Switchback
height-adjustable table elevate the way you work while ensuring it matches
your unique needs. Congure your Switchback with a variety of leg options
and an extensive portfolio of tabletop shapes and workstation add-ons. All
that and quick installation make Switchback a leading solution in simplicity
and endless versatility.
C6553 Rev A |www.sitonit.net |1

Raising or lowering the table can trap, pinch, or crush body parts or property.
Read all instructions before using this equipment.
This product has been evaluated by UL for commercial use. it has not been
evaluated for environments where moving parts are unsupervised.
Keep Away From Children
This table system is designed for adult use and is not intended to be used by
children. Children should be supervised to ensure that they do not play with or near
the table system or its controls.
Do Not Operate This Equipment Unless Properly Trained
Do not operate this equipment unless properly trained. This table system is not
intended for use by adults with reduced physical, sensory, or mental capabilities
or children. Only adults who have appropriate understanding of the operating
instructions and warnings should operate this equipment.
Use Care at All Times to Prevent the Table System
From Tipping Over
Before moving the table system, clear all objects and equipment from the table to
reduce the risk of tipping over. Do not lift the table system by the tabletop. Adjust
the table to its lowest height before moving. In order to avoid risk of tipping or
collapse, make sure corded objects will not be pulled o the table or cause other
objects to fall.
Read the entire instruction manual before you start installation and assembly. If you
have any questions regarding any of the instructions or warnings, please contact
your local distributor for assistance.
To report any issues with this product, contact our customer experience team at:
[phone] or [email protected].
RISK OF DEATH AND SERIOUS INJURY
WARNING
2|C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

1"
1"
1"
1"
1"
1"
Raising or lowering the table can trap, pinch, or crush body parts or property.
Read all instructions before using this equipment.
Keep at Least One Inch of Clearance Around the Desk
to Ensure Nothing is in the Table System's Path
In order to avoid risk of serious injury due to pinch points, conrm that the
surroundings on all sides of the table system are clear.
Body parts and property can be caught between the moving top and immovable
obstacles such as shelves, furniture, windowsills, or walls.
Make sure the power cord moves freely as desk moves up and down.
Do not place feet, legs, or other body parts
on objects placed under table top.
WARNING RISK OF DEATH AND SERIOUS INJURY
C6585 Rev A |www.sitonit.net |3
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Raising or lowering the table can trap, pinch, or crush body parts or property.
Read all instructions before using this equipment.
Do Not Overload Table
Make sure the table system is not overloaded by the weight of the tabletop and
objects on table. Evenly distribute load; excess loads near the edges can reduce
stability and lead to tip-over. Do not exceed maximum load of 250 lb (including top).
Do not exceed maximum edge load of 25 lb when positioning monitors or mounting
accessories. Never sit or stand on the table.
Keep Base Dry
Keep all electrical components away from water and humidity. This equipment is
approved for indoor use only and should not be used outdoors. Always unplug
electrical components before cleaning. Follow all cleaning guidelines provided by the
manufacturer.
Inspect Regularly
Inspect table system regularly and immediately stop using
the product if it is damaged or has loose parts.
Grounding Instructions
This product is equipped with a cord that has an
equipment-grounding conductor and a grounding plug.
Use only the cord provided. Make sure that the product
is connected to an outlet that has the same conguration
as the plug and is properly installed and grounded in
accordance with all local codes and ordinances.
Do not modify the plug provided with the product.
If it will not t the outlet, have a proper outlet
installed by a qualied electrician.
Do not use adapters with this product. Keep cord away from heated surfaces.
Grounded Outlet
Grounding Pin
WARNING RISK OF DEATH AND SERIOUS INJURY
4|C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

• Cordless Drill/Driver
• #2 Phillips Bit
• 5 mm Hex Key (Included)
Recommended Tools
Cordless Drill/Driver
#2 Phillips Bit
5 mm Hex Key (Included)
HARDWARE
M6 × 16 mm
Screws
M6 × 16 mm
Sockethead Screws
M5 × 20 mm
Screws
Quantity of M5 x 20 mm screws varies by model. Carton contains extras.
Parts: Carton 1
Column Corner Bracket
Corner Supports
U-pipes
Cable Clamps
C6585 Rev A |www.sitonit.net |5
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Frame
Parts: Carton 2
• Cap (4)
• Clip, Small (3)
• Clip, Large (1)
• Foot (2)
• Frame (1)
• Hand Control (1)
• Top Support (2)
• Data Extension Cable
• Hand Control Cable
• Power Cord
• Hardware:
• M4 × 22 mm Screw (2)
• M5 × 20 mm Screw (24)
• M10 × 16 mm Screw (8)
Small Clips
Large Clip
Top
Supports
HARDWARE
M4 × 22 mm
Screws
FeetFeet
Caps
M5 × 20 mm
Screws
M10 × 16 mm
Sockethead Screws
Quantity of M5 x 20 mm screws varies by model. Carton contains extras.
Power Cord
Data Extension Cable
Hand Control
6|C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Column
Corner Bracket
Step 1: Slide the corner bracket onto the column.
C6585 Rev A |www.sitonit.net |7
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 2: Fasten the corner bracket into place.
M6 × 16 mm
Sockethead Screws 5 mm Hexy Key
1:1 HARDWARE TOOL
Corner Bracket
8|C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 3: Install cable clamps into the corner bracket.
Cable Clamp
Corner Bracket
C6585 Rev A |www.sitonit.net |9
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 4: Set the corner supports onto the corner bracket.
Corner Support
Corner Bracket
10 |C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 5: Begin attaching the corner supports to the corner bracket.
M6 × 16 mm Screws 5 mm Hexy Key
1:1 HARDWARE TOOL
Do not tighten more than half way.
Corner Bracket
Corner Support
C6585 Rev A |www.sitonit.net |11
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 6: Rotate the columns into the upright position.
12 |C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

U-Pipe
Set Screw
If U-pipes do not separate easily, loosen set screws.
If the tabletop is 48" or shorter, the U-pipes should be
removed and discarded.
For 72" tabletops, a longer U-pipe is used and shipped
separately. Remove and discard the existing U-pipe. This may
aect one or both sides of the tabletop.
Step 7: Separate from the U-pipes.
TOOL
5 mm Hexy Key
C6585 Rev A |www.sitonit.net |13
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 8: Install the top supports by inserting the ange into the rectangular
tube end.
Rectangular Tube End
Flange
Top Support
14 |C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 9: Secure the motor housings by tightening the socket screws
(already in place). Cover the open holes with the caps.
Ensure that the four additional pre-installed socket
screws, to the left or right of the indicated socket
screws, are also rmly tightened.
TOOL
Socket Screw
Cap
Open Hole
5 mm Hexy Key
C6585 Rev A |www.sitonit.net |15
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

No U-pipes are required for tabletops shorter than 48" in length.
Step 10: Install the U-pipes into the two corner supports.
TOOL
Unfasten half-way
5 mm Hexy Key
16 |C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Pilot Hole
U-Pipe
Top Support
Corner Support
No U-pipes are required for tabletops shorter than 48" in length.
Step 11: Insert the other side of the U-pipes into the corner bracket, aligning
the top supports and corner supports with the pilot holes, before centering
the U-pipe.
C6585 Rev A |www.sitonit.net |17
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 11: Finish tightening the sockethead screws from step 2 and the
M6 × 16 mm screws from step 5.
90º 120º
Sockethead Screw
M6 × 16 mm
TOOL
5 mm Hexy Key
18 |C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 12: Install the mending plates.
Continue to step 14 if using a single tabletop without return.
Location of the
plates may vary
based on table
size and presence
of grommets.
M5 × 20 mm Screw
1:1 HARDWARE TOOL
#2 Phillips Bit
Ganging Bracket
C6585 Rev A |www.sitonit.net |19
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE

Step 13: Attach feet to columns.
M10 × 16 mm
Sockethead Screws 5 mm Hexy Key
1:1 HARDWARE TOOL
Column
Foot
20 |C6585 Rev A |www.sitonit.net
Switchback 3-LEG HEIGHT-ADJUSTABLE TABLE