SitOnit Seating Cable Caddy User manual

Cable Caddy
BASKET — HOME EDITION
INSTALLATION INSTRUCTIONS
Clear the cable clutter.
Conceal, control or clip—the Cable Caddy collection oers an array of options
for managing all the cables you need to power your workspace.
C6611 Rev A |www.sitonit.net |1

2|www.sitonit.net |C6611 Rev A
Cable Caddy BASKET — HOME EDITION ASSEMBLY INSTRUCTIONS
• Cordless Drill/Driver
• 1⁄8" Drill Bit
• #2 Phillips Bit or #2 Phillips Screwdriver
• Wire Basket (1)
• #10×⅝"PanHeadScrew(4)
Recommended Tools Parts
#2 Phillips Screwdriver
Cordless Drill/Driiver
#10×⅝"Screws
Wire Basket
HARDWARE
#2 Phillips Bit
1⁄8" Drill Bit
Read the entire instruction manual before you start installation and assembly. If you
have any questions regarding any of the instructions or warnings, please contact
your local distributor for assistance.
To report any issues with this product, contact our customer experience team at:
[phone] or [email protected].

C6611 Rev A |www.sitonit.net |3
Cable Caddy BASKET — HOME EDITION ASSEMBLY INSTRUCTIONS
TOOLS
Step 1: Mark the position of the wire basket and drill ½" deep pilot holes.
1⁄8" Drill Bit #2 Phillips Bit

4|www.sitonit.net |C6611 Rev A
Cable Caddy BASKET — HOME EDITION ASSEMBLY INSTRUCTIONS
Step 2: Attach the wire basket to the underside of the tabletop.
1:1 HARDWARE TOOLS
#10x⅝"Screw #2 Phillips Bit or Screwdriver