SitOnit Seating NOVO User manual

Novo – Home Edition
ASSEMBLY INSTRUCTIONS
Novo for the win.
Modern and made to be the best seat in
your house. Bring the elevated design,
features and comfort of Novo® from the
corner oce to your home oce.
C6578 Rev A |www.sitonit.net |1
INSTALLATION VIDEO

2 |C6578 Rev A |www.sitonit.net
Novo – Home Edition ASSEMBLY INSTRUCTIONS
CAUTION
Please read all assembly instructions before installing.
Failure to follow instructions could result in product
failure or potential injury.
To report any issues with this product, contact
our customer experience team at: [phone]
or [email protected].
¼" Hex L-Key
• ¼" Hex L-Key
Recommended Tools
Hardware kit is attached
to the corrugated carton
insert under the red tape.
Red Tape

C6578 Rev A |www.sitonit.net |3
Novo – Home Edition ASSEMBLY INSTRUCTIONS
• Back Assembly (1)
• Seat Assembly (1)
• Base Assembly (1)
• Cylinder (1)
Seat
Assembly
Base AssemblyBack Assembly
Parts: Chair
Cylinder
Standard Synchro Mechanism
• Hardware Pack:
•5⁄16" × 3⁄4" Screw (4)
•5⁄16" Washer (4)
Standard Synchro Mechanism
With Seat-Depth Adjustment
• Hardware Pack:
•5⁄16" × 3⁄4" Screw (4)
•5⁄16" Washer (4)
Parts: Mechanism (will come attached to seat)
⁵⁄₁₆" Washers
Standard Synchro Mechanism
1⁄4x 3⁄4"
Screws
⁵⁄₁₆" Washers
Standard Synchro Mechanism
1⁄4x 3⁄4" Screws

4 |C6578 Rev A |www.sitonit.net
Novo – Home Edition ASSEMBLY INSTRUCTIONS
Seat assembly should be placed on
a rm at surface for assembly.
You can use the box the chair
shipped in or a table for this step
Step 1: Slide the yoke into the mechanism's bracket and align the
hole patterns.
Yoke
Bracket

C6578 Rev A |www.sitonit.net |5
Novo – Home Edition ASSEMBLY INSTRUCTIONS
Step 2: Secure the back assembly to the seat assembly.
¼" Hex L-Key (Provided)
1:1 HARDWARE TOOLS
⁵⁄₁₆" Washer
Screws must be
tightened to a minimum
torque of 150 in-lbs.
⁵⁄₁₆" × 3⁄4" Screw
5⁄16" × 3⁄4" Screw
5⁄16" Washer

6 |C6578 Rev A |www.sitonit.net
Novo – Home Edition ASSEMBLY INSTRUCTIONS
Step 3: Push the cylinder into the center of the base.
Base
Cylinder

C6578 Rev A |www.sitonit.net |7
Novo – Home Edition ASSEMBLY INSTRUCTIONS
Step 4: Align the mechanism with the cylinder and push until seated.
Cylinder
Mechanism
The cylinder is seated
correctly when you can
lift the chair and the
cylinder stays attached
to the mechanism.