SitOnit Seating GOBI User manual

GOBI
ASSEMBLY INSTRUCTIONS
Work mode. Wait mode. Let's-get-it-done mode. Today’s open and collaborative spaces
should help you shift spontaneously. And Gobi is the perfect huddle partner. Its sculpted
comfort and modern, easy going design can carry you through the many modes you nd
yourself in—so that another day at the oce feels like anything but.
C6506 Rev. A

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
GOBI ASSEMBLY INSTRUCTIONS
COMPONENT LIST
1:1 SCALE
COMPONENTS
REQUIRED TOOLS
Metal Base
• Seat Assembly (1)
• Metal Mechanism (1)
• Cylinder (1)
• Metal Base (1)
Wood Base
• Seat Assembly (1)
• ⁵⁄₁₆" × 1" Screw (2)
• ⁵⁄₁₆" × 1 ¼" Screw (2)
• ⁵⁄₁₆" Washer (4)
• Spacer (2)
• Wood Base (1)
Seat Assembly
METAL MECHANISM
(Mechanism will come attached to seat.)
¼"Hex L-Key
⁵⁄₁₆" × 1" Screw ⁵⁄₁₆" × 1 ¼" Screw Spacer ⁵⁄₁₆" Washer
Metal Base Wood Base
Cylinder
HARDWARE KIT
(Hardware kit is packaged separately.)
⁵⁄₁₆" × 1" Screws ⁵⁄₁₆" × 1 ¼" Screws
⁵⁄₁₆" WashersSpacers
BASE
OR
2

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
GOBI ASSEMBLY INSTRUCTIONS
STEPS
METAL BASE OPTION
1. Slide the cylinder into the center of the base assembly and give it a push to seat it into position. With
the seat assembly sitting upside-down on the oor, rmly hold the base assembly, align the top of the
cylinder with the mechanism's cylinder mounting hole and push in place until seated. The cylinder is
seated when you can lift the chair and the cylinder stays attached to the mechanism.
Note: For auto-return cylinders, the position in which the chair is rst placed will be the "return" position.
1
Seat Assembly
Mechanism
Cylinder
Base Assembly
SUGGESTED ORIENTATION
Base Assembly
Seat Assembly
Mechanism
Cylinder
3

To report any issues with this product, please contact our customer service department at [phone].
For more information, visit www.sitonit.net
GOBI ASSEMBLY INSTRUCTIONS
STEPS
1. With the seat assembly sitting upside-down on the oor, place one spacer over each of the front holes on the
seat assembly. Firmly hold the base assembly and align it with the hole pattern of the seat assembly.
2. Slide one ⁵⁄₁₆" washer over each of the four screws, then thread the two ⁵⁄₁₆" x 1 ¼" screws through the holes
with spacers, and the two ⁵⁄₁₆" x 1" screws through the remaining two holes. Tighten all four screws using a ¼"
hex L-key.
1WOOD BASE OPTION
2
Base Assembly
Base Assembly
Seat Assembly
Seat Assembly
Spacers
Spacers
Base Assembly
⁵⁄₁₆" × 1" Screw
⁵⁄₁₆" Washer
Seat Assembly
⁵⁄₁₆" × 1 ¼" Screw
4