SitOnit Seating Focus 2.0 User manual

Focus 2.0
TASK CHAIR AND TASK STOOL
ASSEMBLY INSTRUCTIONS
Focus reimagined.
Updated. Upgraded. Up to any
task. There’s a legacy that follows
Focus. Some call it classic. Others
say it’s iconic. It’s been one of the
industry’s best-selling chairs for
10+ years—and it’s time we make
something great even better.
C6585 Rev A |www.sitonit.net |1

2|C6543 Rev B |www.sitonit.net
Focus 2.0 ASSEMBLY INSTRUCTIONS
• ½" Hex Socket
• 1⁄4Hex L-Key
Back Assembly
½" Hex Socket
• Back Assembly
• Seat Assembly
Recommended Tools
Seat Assembly
Parts: Mechanism
1⁄4" Hex L-Key
Read the entire instruction manual before you start installation and assembly. If you
have any questions regarding any of the instructions or warnings, please contact
your local distributor for assistance.
To report any issues with this product, contact our customer experience team at:
[phone] or [email protected].
Read the entire instruction manual before you start installation and assembly. If you
have any questions regarding any of the instructions or warnings, please contact
your local distributor for assistance.
To report any issues with this product, contact our customer experience team at:
[phone] or [email protected].

C6543 Rev B |www.sitonit.net |3
Focus 2.0 ASSEMBLY INSTRUCTIONS
• Swivel-Tilt or Basic Mechanism (1)
•5⁄16" × 1½" Screw (4)
•0.317" Washer (4)
• Enhanced Synchro Mechanism With
Optional Seat-Depth Adjustment (1)
•5⁄16" × ¾" Screw (3)
•0.317" Washer (3)
Parts
Swivel-Tilt
Mechanism
Enhanced Synchro
Mechanism
ENHANCED SYNCHRO
SWIVEL-TILT OR BASIC
Basic
Mechanism
Parts: Base
Cylinder Base Assembly Foot Ring
• Base Assembly (1)
• Cylinder (1)
• Foot Ring (1, Optional for Stool)
5⁄16" × 1½" Screws0.317" Washers ⁵⁄₁₆" × ¾" Screws
0.317" Washers

4|C6543 Rev B |www.sitonit.net
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 1: Place seat/mechanism assembly on a rm, at elevated surface.
Swivel-tilt mechanism or basic mechanism
The chair's shipping box or
a sturdy table may be used
for this step.

C6543 Rev B |www.sitonit.net |5
Focus 2.0 ASSEMBLY INSTRUCTIONS
Enhanced synchro mechanism
Step 1: Place seat/mechanism assembly on a rm, at elevated surface.
The chair's shipping box or
a sturdy table may be used
for this step.

6|C6543 Rev B |www.sitonit.net
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 2: Align the Y-support on top of the mechanism.
Swivel-tilt mechanism or basic mechanism

C6543 Rev B |www.sitonit.net |7
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 2: Slide the Y-support into the mechanism and align it with the hole
pattern.
Enhanced synchro mechanism

8|C6543 Rev B |www.sitonit.net
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 3: Secure the back assembly to the mechanism.
Swivel-tilt mechanism or basic mechanism
5⁄16" × 1½" Screw
0.317" Washer
1:1 HARDWARE
TOOLS
0.317" Washer
Minimum torque of 150 in-lbs
5⁄16" × 1½" Screw½" Hex Socket

C6543 Rev B |www.sitonit.net |9
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 3: Secure the back assembly to the mechanism.
Enhanced synchro mechanism
5⁄16" × ¾" Screw
0.317" Washer
5⁄16" × ¾"Screw 0.317" Washer
1⁄4" Hex L-Key
1:1 HARDWARE
TOOLS
Minimum torque of 150 in-lbs

10 |C6543 Rev B |www.sitonit.net
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 4: Insert the cylinder into the base and press down to seat it.

C6543 Rev B |www.sitonit.net |11
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 5 (Optional): Remove the protective spacer under the stool ring
and slide the cylinder into the base. Push down to seat it.

12 |C6543 Rev B |www.sitonit.net
Focus 2.0 ASSEMBLY INSTRUCTIONS
Step 6: Align the seat assembly with the cylinder and push until seated
The cylinder is seated correctly when you can lift the chair and the cylinder stays
attached to the seat assembly.