Spectrum Industries 37234 User manual

Assembly Instructions
0190493 Page 1 of 2
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Modesty Panel for Flex Active Table
37234 - 48”W Table
37235 - 60”W Table
37236 - 72”W Table
Tools Required
Phillips
screwdriver
Installation
1. Orient the modesty panel and corners as shown and lock together.
Figure 1.
Figure 1 Figure 2
2. Place a mounting bracket inside each panel opening.
Figure 2.
Modesty Panel
Left Corner
Right Corner
Mounting
bracket
Note: Before installing, ip the table face down (laminate side-down)
onto a at, non-abrasive surface like another table.
Panel only:
0190447 - 48”W
0190448 - 60”W
0190449 - 72”W
with insert panel:
0190450 - 48”W
0190451 - 60”W
0190452 - 72”W
(1) Modesty panel
(11) 026073
#8 x 3/4” PHSM
(3) 0134099
Mounting bracket
2
1
2
1
(1) 0133629
Left Corner
(1) 0133632
Right Corner

0190493 Page 2 of 2
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2017 Spectrum Industries Inc., All rights reserved.
Figure 3
3. Align the modesty panel, bracket, and worksurface mounting holes.
Figure 3.
Figure 4
4. Attach to worksurface with (11) #8 x 3/4” PHSM
screws. Figure 4.
#8 x 3/4” PHSM
Assembled Modesty Panel
Worksurface