Spectrum Industries Optio Collaboration Table 37132 User manual

??
Optio Collaboration™Table
0190144R5 Page 1 of 7
Assembly Instructions
Instructions d’assemblage
Instrucciones de montaje
37132
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Important
Avant d’utiliser ce produit:
• Veillez à lire ce guide
• Respectez les consignes de sécurité et d’utilisation
• Vériez que vous disposez de toutes les pièces
nécessaires à l’installation
Importante
Antes de utilizar este producto:
• Lea este manual
• Cumpla con todas las instrucciones de prevención de
accidentes y operativas
• Revise que todas las partes y las cantidades correctas
estén incluidas
Any parts damaged during shipment must be reported within 5
days of receipt. To report information regarding missing parts or
damage, to purchase parts or accessories, or if you have any
questions, please contact us.
Thank you for purchasing Spectrum products!
Les pièces endommagées pendant le transport doivent faire
l’objet d’un rapport dans les 5 jours de leur réception. Veuillez
prendre contact avec nous si des pièces manquent ou sont
abîmées, si vous avez des questions, ou encore pour acheter
des pièces ou des accessoires.
Merci pour votre achat d’un produit Spectrum!
Si alguna parte se dañó durante el embarque, deberá reportarla
en un lapso de 5 días a partir de la recepción. Para reportar
cualquier información sobre partes faltantes o dañadas, para
adquirirlas o comprar accesorios, o bien, si tiene alguna duda,
póngase en contacto con nosotros.
¡Gracias por adquirir productos Spectrum!
Owner’s Manual
Le manuel du propriétaire
El manual del propietario
VideoVideo
VidéoVidéo
VídeoVídeo
SpecsSpecs
SpécicationsSpécications
EspecicacionesEspecicaciones
800-235-1262800-235-1262
www.spectrumfurniture.com/en/products/optio-collaboration-table

Slab leg
Slab leg
Note: If installing a display stand, do not secure worksurface to the
base yet. The worksurface will be aligned and secured after the
display stand is attached.
0190144R5 Page 2 of 7
2
1
X 4
1Remove from pallet
2Set worksurface on base 2Attach legs to worksurface braces
Tables with slab or T-legsTables with eLift legs
X16
1/4-20 X 5/8”
PHMS

Display stand
VESA mount
Tables with eLift legs only:
After the display stand is secured to the worksurface, align
and secure the worksurface assembly to the eLift base.
6Install ller panel (if included)
0190144R5 Page 3 of 7
5Install display stand (if equipped)
4Flip slab / T-leg table upright
CAUTION
3Attach cord channel (if equipped)
#14 x 7/8”
PHSM
X4
#10 x 3/4” PHSM
Filler panel
Grommet
Cord channel
X2

8Install control button (eLift legs only)
7Route wiring (if equipped with modules)
0190144R5 Page 4 of 7
Control
button #8 x 5/8” PHSM
Pine tree clip
Pine tree clip
Cord
To control box
in AV channel
Control button
DownUp
Reset Procedure:
1. Unplug, then re-plug the power cord into a wall outlet.
2. Make sure all lift mechanism wire connections are in place and secure.
3. Remove anything located under the worksurface.
4. Press and hold the “Down” button to lower the worksurface to the
lowest “work” position until it stops moving.
5. Release the “Down” button.
6. Press and hold the “Down” button again until the worksurface
bottoms-out, slightly rises, and stops moving. The worksurface must
be completely lowered before resuming operation.
Note: If the worksurface does not lower when doing this step,
release the “Down” button, and retry step 6.
7. Release the “Down” button. The lift mechanism has now been
reset and the worksurface can be adjusted normally.
CAUTION
Always unplug the eLift before working under the worksurface.
Although this table utilizes an anti-collision feature that briey stops
and reverses the motion of the table in the event of an obstruction, Use
caution when raising or lowering the worksurface! Do not sit at,
under, or on the worksurface when operating the lift mechanism and be
sure table movement does not interfere with objects or people.
CAUTION
Keep clear of pinch points during worksurface movement.
Note: The lift actuators are rated at a maximum capacity of 180 lb each.
CAUTION
USE CAUTION WHEN RAISING OR LOWERING TABLE!
Operation:
1. Plug the 15-amp power cord into a wall outlet.
2. Locate the “Up” and “Down” buttons on the control pad.
3. To raise or lower the worksurface, press and hold the “up” or “down”
arrow keys on the control pad until the worksurface reaches the
desired height. The worksurface maximum height is 42”, minimum
height is 29”.
Keep clear of pinch points during worksurface movement.
Note: Additional sets of pre-drilled mounting holes are also available
under the worksurface for control button mounting.
X4

eLift Leg Troubleshooting Guide
0190144R5 Page 5 of 7
Symptom Problem Solution
eLift legs will not operate
Loss of power Be sure unit is plugged into a live circuit.
Loose electrical connections Make sure all electrical connections are securely plugged into the control box.
Object encountered under
worksurface
1. Raise the worksurface by pressing the “Up” button.
2. Remove any items sitting below the worksurface.
3. Reset the lift mechanism (see below for procedure.)
Misaligned actuators
Reset Procedure:
1. Unplug, then re-plug the power cord into a wall outlet.
2. Make sure all lift mechanism wire connections are in place and secure.
3. Remove anything located under the worksurface.
4. Press and hold the “Down” button to lower the worksurface to the lowest “work”
position until it stops moving.
5. Release the “Down” button.
6. Press and hold the “Down” button for 30 seconds. The worksurface will lower,
bottom-out, slightly rises, then stop moving. The worksurface must be completely
lowered before resuming operation.
Note: If the worksurface does not lower when doing this step, release the
“Down” button, and retry step 6.
7. Release the “Down” button. The lift mechanism has now been reset and the
worksurface can be adjusted normally.
This table has a load-sensing, anti-collision feature in the controller that actively locks
out the lift mechanism when unbalanced loads are encountered; i.e. weight from a per-
son sitting on one side of the table. The following reset procedure should be performed
if the lift mechanism becomes locked out and the table does not extend or retract.
WARNING
The anti-collision feature does not function in RESET MODE. Do not sit at,
under, or on the worksurface while resetting the lift mechanism. Be sure
the table movement does not interfere with objects or people. Do not place
any items under the worksurface.

0190144R5 Page 6 of 7
• Lea este manual del propietario antes de la instalación u operación.
• No permita que los niños muevan el mesa.
• Proceda lenta y cuidadosamente al mover el mesa.
• Solo para uso en interiores. No instale o guarde el mesa donde quede
expuesto a la humedad.
• No obstruya las rendijas de ventilación.
• Evite cargar el equipo de forma desigual dentro del mesa. La
distribución asimétrica del peso podría provocar que el mesa se
vuelque al momento de moverlo.
• No permita que nadie se siente, pare o suba al mesa.
• Para limpiar las super cies sucias, utilice un paño, trapo suave o
esponja con jabón neutro o una solución de detergente. No utilice
solventes o abrasivos ásperos.
• El uso convencional de este mesa es institucional. No contiene
ninguna parte que pueda ser reparada por el usuario ni requiere
de mantenimiento por parte de éste. Si fuera necesario darle
mantenimiento, póngase en contacto con Spectrum Industries para
obtener asistencia.
Prevención de accidentes eléctricos:
• No enchufe el cable de alimentación a un cable de extensión.
• Revise que los cables de alimentación no tengan ningún daño
antes de cada uso. No utilice cables de alimentación que estén
dañados.
• Desenchufe el cable de alimentación del tomacorriente eléctrico
sosteniendo el cable  rmemente. No desenchufe el cable de
alimentación jalando únicamente del cable.
• No se pare, circule, jale o coloque ningún objeto sobre el cable
de alimentación.
• Para mayor seguridad, enchufe el mesa a una conexión a tierra
controlada por un interruptor de circuito GFI (interruptor de fallas
de conexión a tierra).
• Los dispositivos eléctricos no son juguetes. Los niños
generalmente no están conscientes de los riesgos asociados con
los dispositivos eléctricos. Este mesa lo deberán utilizar siempre
personas adultas o bajo su supervisión.
Advertencia: reubicar equipo de audio y/o video a un mueble que no
haya sido diseñado especí camente para tal uso, puede provocar la
muerte o lesiones graves debido a que puede colapsarse o volcarse
sobre un niño.
Advertencia: existe peligro de muerte o lesiones graves si los niños
se suben a un mueble de equipo de audio y/o video. Un control
remoto o juguete colocado sobre el mueble puede alentar a un niño a
subirse y provocar que el mueble se vuelque sobre el chico.
Instrucciones importantes de prevención de accidentes y cuidado
• Lire ce guide d’utilisation avant l’assemblage ou l’utilisation.
• Interdire aux enfants de déplacer le tableau.
• Déplacer le tableau lentement et prudemment.
• Utilisation à l’intérieur uniquement. Ne pas assembler et ne pas ranger le
tableau dans un endroit humide.
• Ne pas boucher les prises d’air de ventilation.
• Éviter le chargement mal réparti de l’équipement sur le tableau. Un
chargement mal réparti risque de faire basculer le tableau en déplacement.
• Interdire à quiconque de s’asseoir, de se tenir debout ou de grimper sur le
tableau.
• Passer un chiff on doux ou une éponge, imbibés de solution nettoyante ou
de savon liquide doux, sur les surfaces sales. Ne pas utiliser des solvants
rudes ou des abrasifs.
• Ce tableau est destiné à un usage institutionnel. Il ne contient aucune
pièce susceptible d’être réparée par l’utilisateur et ne nécessite aucun
entretien de la part de celui-ci. Si une maintenance est requise,
communiquer avec Spectrum Industries pour obtenir de l’aide.
Consignes de sécurité en électricité
• Ne pas brancher le cordon d’alimentation sur une rallonge.
• Véri er que les cordons d’alimentation sont intacts avant chaque
utilisation. Ne pas les utiliser s’il sont abîmés.
• Pour débrancher le cordon de la prise murale, saisir son bouton
isolant et tirer; ne pas tirer le cordon.
• Ne pas marcher, ne pas rouler et ne pas placer des objets sur le
cordon d’alimentation; ne pas le traîner.
• Pour plus de sécurité, brancher le tableau sur une prise mise à la
terre protégée par un disjoncteur de fuite de terre.
• Les appareils électriques ne sont pas des jouets. Les enfants
n’ont souvent pas conscience des dangers associés aux appareils
électriques. Ce le tableau doit donc être toujours utilisé par un
adulte, ou sous la surveillance d’un adulte.
Avertissement - Reloger un équipement audio ou vidéo sur un
meuble non conçu pour supporter cet équipement pourrait entraîner
de graves blessures, voire la mort, à la suite de l’eff ondrement du
meuble ou de sa chute sur un enfant.
Avertissement - Un enfant qui grimpe sur un meuble d’équipement
audio ou vidéo pourrait subir des blessures graves ou mortelles. Une
télécommande ou des jouets placés sur le meuble risquent d’inciter un
enfant à y grimper : le meuble pourrait alors basculer et écraser l’enfant.
Consignes importantes de sécurité et d’entretien
Important Safety and Care Instructions
• Read these instructions before assembly or operation.
• Do not allow children to move the table.
• Proceed slowly and carefully when moving the table.
• For indoor use only. Do not install or store the table where it will be
exposed to moisture.
• Do not block the ventilation openings.
• Avoid uneven loading of the equipment into the table. Uneven weight
distribution could cause the table to tip when the table is moving.
• Do not allow anyone to sit, stand, or climb on the table.
• Use a damp, soft-cloth, or sponge, with mild soap or detergent solution
to clean dirty surfaces. Do not use harsh solvents or abrasives.
• This table is intended for institutional use. It does not have any user-
serviceable parts or user-maintenance requirements. If servicing is
necessary, please contact Spectrum Industries for assistance.
Electrical Safety:
• Do not plug the power cord into an extension cord.
• Inspect power cords for damage before each use. Do not use power
cords that are damaged.
• Unplug power cord from electrical outlet by gripping the cord. Do not
unplug the power cord by pulling only on the cord.
• Do not step on, drive over, drag, or place objects on the power cord.
• For added safety, plug the table into a grounded outlet controlled by a
GFI (Ground Fault Interrupter) circuit breaker.
• Electrical devices are not toys. Children are often unaware of the
hazards associated with electrical devices. This table must always be
used by adults or with adult supervision.
Warning - Relocating audio and/or video equipment to furniture not
speci cally designed to support audio and/or video equipment may
result in death or serious injury due to the furnishing collapsing or over
turning onto a child.
Warning - Death or serious injury may occur when children climb
on audio and/or video equipment furniture. A remote control or toys
placed on the furnishing may encourage a child to climb on the
furnishing and as a result the furnishing may tip over on to the child.

0190144R5 Page 7 of 7
1500 RIVER STREET, PO BOX 400, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
Warranty
1-800-235-1262
Toll-free HELPLINE
[email protected]
© 2023 Spectrum Industries Inc., All rights reserved.
We will make it right for you!
Thanks for choosing Spectrum! Spectrum is committed to provide complete customer satisfaction.
Each of our products is manufactured from the best materials available and each product is strin-
gently monitored throughout the production process through our P.A.C.E. program (Product Assur-
ance to meet Customer Expectations).
We expressly warrant that Spectrum products will be of good quality and workmanship and free from
defect for the period set out in the warranty from the date of delivery.
For a listing of all product specifi c warranty terms please visit our website at:
https://www.spectrumfurniture.com/en/resources/purchasing-terms-warranty