Stanley 9K Series User manual

Product
Manufacturer
Supplier
Representative
Contact #
hollow metal frames
HMX
89A
Harvey ertsch
480.838.1620
Plam door
Vancouver
"
Kristen Belcheff
253.845.9581
hinges
PBB
PBB
Tina Estrada
800.726.3414
privacy lockset
Stanley/Best
C & I Show Hardware & Security Systems
Susie
480.967.8568
wall stop
Ives
ABS - American Building Supply
Frank Martinez
909.879.8884
kick plate
Ives
ABS - American Building Supply
"
"
Warranty Contact Sheet

HEAVY DUTY CYLINDRICAL LOCKS – LEVERS
HEAVY DUTY LOCKS - LEVERS

2
HEAVY DUTY
L
TABLE OF CONTENTS
Features ......................................................................................................2
Specifications ............................................................................................3
How to Order...............................................................................................3
Shipping Weights.......................................................................................4
Lever Styles & Trim ...................................................................................4
CORMAX
™
Patented Keying System.....................................................10
Deadlocking Latches & Strikes.............................................................10
Lever Features & Dimensions..................................................................5
Function...................................................................................................6-9
Strike & Door Preparation......................................................................11
9K Sample Specifications.......................................................................11
Service Equipment...................................................................................12
FEATURES
1.For versatile applications, lever by knob trim variations are available.
2. Rose locking pin and rose assembly design offers great torque resistance. It prevents the locking pin from twisting, bending, or breaking
under attack.
3.The innovative design of the slotted key release cam and locking lug assembly create maximum attack resistance.
Even though damaged, the lock still allows key access. In addition, the lever is fully functional from the inside.
The hub-mounted torsion spring and strong retractor springs help prevent lever sag and offer a smooth and snappy operation.
4. Strong through-bolt mounting studs increase torque resistance. Heavy rose liner material is highly attack resistant.
5.Strong retractor springs provide resistance to lever sag.
6.Zinc hubs with a shrouded locking lug, guaranteeing higher quality and increased torque resistance.
7.The outside lever sleeve is a seamless one piece construction made of a hardened steel alloy that provides additional reinforcement in the
locking lug slot.
8.Lost Motion feature available allowing 45º lever rotation in either direction without engaging retractor assembly.
9.Interchangeable core allows for quick re-keying and customized masterkeying.
TABLE OF CONTENTS & FEATURES
9K – EXPLODED
1
234
56789
Page Page

3
L
OCK - LEVERS
SPECIFICATIONS
*Handles are made from a zinc alloy, and have been plated to be equivalent in appearance to the finishes listed.
For information on 9K non-IC products please refer to BEST’s non-IC keying products brochure.
**RQE option requires modification to chassis and is sold with assembly unit only.
HOW TO ORDER
SPECIFICATIONS
HOW TO ORDER
Finish – (BHMA) US DESCRIPTION
605 3 bright brass
606 4 satin brass
611 9 bright bronze
612 10 satin bronze
613 10B oxidized satin bronze, oil rubbed
618 14 bright nickel plated
619 15 satin nickel plated
622 19 flablack
625 26 bright chromium plated
626 26D satin chromium plated
690 20 dark bronze
Antimicrobial Finish
626AM satin chrome plated with UltraShield
™
antimicrobial protected coating
The Stanley Security Solutions UltraShield
™
finish inhibits the growth
of bacteria and other microbes on the surface of the hardware.
NOTE: Stanley’s UltraShield
™
option is recommended for use on any hardware
application where product cleanliness is a high priority. i.e;. Hospital/Healthcare,
Elderly Care, Education, Transportation, Food-Service, Hospitality.
Latch – Solid brass
9
/ 16 ” throw. Front 2
1
/ 4 ” x 1
1
/ 8 ” beveled.
Lever handles – Lever handles are a high-quality zinc alloy. Trim
components are brass or bronze. Body is approximately
5
/ 8 ” in
diameter; Handle is approximately 4
3
/ 4 ” long (from center-line of
chassis). #14 and #15 levers conform to California Administrative
Code Title 19 and Title 24. All three styles of levers conform to the
Illinois Accessibility Standard.
Mounting – In addition to standard door preparation (ANSI A115.2 for
1
3
/ 4 ” doors), two additional holes are needed for through-bolts.
Through-bolts require two
5
/ 16 ” diameter holes located at 12 o’clock
and 6 o’clock positions. A drill jig can be ordered to insure accuracy
of the holes. (see KD303 page 5).
Projection on door – Approx. 2
3
/ 4 ” when mounted on 1
3
/ 4 ” door.
Strike – STK: Conforms to ANSI A115.2 (2
3
/ 4 ” x 1 1/8” with curved lip
& box). S3: Conforms to ANSI A115.2 for 1
3
/ 4 ” doors (4
7
/ 8 ” x 1
1
/ 4 ”
with curved lip). S3-
7
/ 8 : Conforms to ANSI A115.2 for 1 / 4 ” doors
(4
7
/ 8 ” x 1
7
/ 8 ” flat)
U ltra S hield
™
ADA–Americans With Disabilities Act:
9K series – The design and operation of the BEST
®
cylindrical lock meets the intent of the standard
for ANSI A117.1 section 404.2.6
Builders Hardware Manufacturers Association:
9K series – Listed by BHMA for A156.2, Series 4000, Grade 1.
Underwriters Laboratories
®
:
9K series – Listed by Underwriters Laboratories
for use on 3 Hr, A label for single or double
swinging doors.
Florida Building Code and Miami-Dade County Code:
9K series –
9
/ 16 ” latch throw – Listed by Florida Building Code
and Miami-Dade County at ± 75 PSF for single doors.
9K series –
3
/ 4 ” latch throw – Listed by Florida Building Code
and Miami Dade County at ± 80 PSF for single doors and ± 50
PSF for double doors.
California State Fire Marshal:
9K series – Listed with California State Fire Marshal.
9K series 14 & 15 lever conforms with California Title 24.
Backset – 2
3
/ 4 ” standard, 3
3
/ 4 ” and 5” available.
Chassis – Critical latch and chassis components are brass or
corrosion-treated steel. 2
1
/ 16 ” diameter to fit 2
1
/ 8 ” hole in door .
(Conforms to ANSI A115.2). Lost Motion feature available as an
option. (see page 5 for options/features).
Door thickness – Available for 1
3
/ 4 ” to 2
1
/ 4 ” doors only.
Spacers available for 1
3
/ 8 ” doors.
Roses – C– 3” Convex D– 3
1
/ 2 ” Convex
K– 3” Convex-no ring L– 3
1
/ 2 ” Convex-no ring
Products protected by one or more of the following patents:
5,590,555 5,794,472 Other products patent pending.
9K 3 7 AB 15 A STK 626
Series Backset Core
Housing Function Code Lever Style Rose Style Strike Package Finishes Options
9K 3– 2
3
/ 4 ”
4– 3
3
/ 4 ”
5– 5”
0– keyless
7– 7-pin
housing
accepts
all BEST
®
cores
AB– entrance
D– storeroom
L– privacy
N– passage
R– classroom
etc.
14– curved return
15– contour
angle return
16– curved no
return
C– 3” convex
D– 3
1
/ 2 ”
convex
K– 3” convex
- no ring
L– 3
1
/ 2 ”
convex
- no ring
STK– 2
3
/ 4 ”
ANSI
S3– 4
7
/ 8 ”
ANSI
S3– 7/8-
7
/ 8 ”
flat strike
605 606
611 612
613 618
619 622
625 626
690
AL– abrasive lever
LL– lead lined
LM– lost motion
RQE– request to exit**
SH– security head screws
TL– tactile lever
3/4–
3
/ 4 ” throw latch
7/8” LTC– flat lip strike
NOTE: specify inside (I),
outside (O), or both (B)
for AL,TL options
pages 6-9 pages 4-5 pages 4-5 page11 page 5

4
HEAVY DUTY
L
SHIPPING WEIGHTSLEVER STYLES AND TRIM
LEVER STYLES AND TRIM
14C
14D
14K
14L
15C
15D
15K
15L
16C
16D
16K
16L
SHIPPING WEIGHTS
The chart is the approximate shipping weight for the standard 9K functions locksets. This weight includes the weight of the lockset with the
“#15” style lever, “K” style rose, latch, strike package, and box. Listed separately are the approximate weights for “with core” and “less
core” shipments.
Lock
Function
Nomenclature
Case
Quantity Shipping Weight
With core
Shipping
Weight
Less Core
Y 9 31 lbs.
N 9 40 lbs.
L,NX,P 9 40 lbs.
AB,D,E,H,HJ,R,T 9 42 lbs. 40 lbs.
C,G,IN,S,W 9 44 lbs.
40 lbs.

5
L
OCK - LEVERS
DIMENSIONS
LEVER & TRIM DIMENSIONS
#15D or #15L Trim
(”D” rose shown)
#14C or #14K Trim
(”C” rose shown)
#16C or #16K Trim
(”K” rose shown)
LEVER FEATURES
LEVER FEATURES
Abrasive Lever Option
Besides complying with a wide variety of accessibility codes and ordinances, Best Access Systems lever handles are available with a
special abrasive feature. Abrasive strip on the lever immediately identifies warnings on doors to hazardous areas for the blind.
To order: Designate “AL” on How to Order (page 3). Note: abrasive strip is available on all levers, except #14, #15, #16 levers in 613 finish.
Lost Motion Feature
The Lost Motion feature allows the lever handle to move 45 degrees from parallel to the horizontal plane without engaging the latchbolt
assembly. When the lockset is in the locked mode, this feature makes over-torque or over-lever-age abuse more difficult to achieve.
To order: designate “LM” on How to Order (page 3).
Non IC Lever Option
The 9K heavy duty cylindrical lock may be adapted to existing keying systems by using a special retrofit lever and throw member that will
accept 6 pin single shear-line cylinders from non BEST manufacturers. No internal modifications are required to adapt the 9K to cylinders
from the following manufacturers: Corbin-Russwin, Medeco, Sargent, Schlage, Yale. Refer to BEST
®
non-IC keying products brochure for
more details.
RQE Feature
The 9K lever handle cylindrical can be built to incorporate a request-to-exit (RQE) switch. A normally open switch provides momentary
switch closure when the inside lever is rotated. RQE option requires modification to chassis and is sold with assembly unit only.
To order: designate “RQE” on How to Order (page 3).
Tactile Lever Option
Tactile levers may be used in areas where improved grip is required or as a warning in hazardous areas. Grooves are machined into the
back of the hand grasp portion of the lever to improve grip and/or to provide a sensory warning in hazardous areas. This option can be
used for Blind, Safety or Accessibility applications. To order: Designate “TL” on How to Order (page 3).

6
HEAVY DUTY
L
FUNCTIONS
FUNCTIONS
•Rotating the inside lever,
•Turning the key in the outside
lever-only when the inside
push button is out,
•Removing the core with a
control key and using a special
emergency key
Pushing the inside button projects an “occupied” indicator in the outside lever and blocks all operating keys.
•Rotating the inside lever,
•Rotating the outside lever–
only when the inside push
button is out,
•Turning the key in the outside
lever
Corridor
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside lever could be hazardous or even fatal.
G
F91
Always unlocked•Pushing the inside button,
•Pushing and turning the inside
button. Turning the button keeps
the outside lever locked until
the button is turned back
•Turning the key in the outside
lever, (only when the button is
not turned)
•Rotating the inside lever, (only
when the button is not turned).
•Closing the door (only when the
button is not turned)
Cannot be locked
Pushing the inside button blocks all operating keys, but no “occupied” indicator is projected.
Turning the key in either the inside or the outside, locks or unlocks both sides.
Double Keyed*
•Turning the key in the outside
lever,
• Rotating the inside lever
•Rotating the inside lever,
•Rotating the outside lever-only
when the inside push button is
out.
• Turning the key in the outside
lever
•Rotating the inside lever,
•Turning the key in the
outside lever-only when the
inside push button is out,
•Removing the core with a
control key and using a
special emergency key
•Rotating the inside lever,
•Turning the key in the outside
lever,
•Rotating the outside lever
when not locked by key
•Rotating the inside lever,
•Rotating the outside lever
when not locked by key or
push button
•Rotating the inside lever,
•Rotating the outside lever
when not locked by key,
•Turning the key in the outside
lever
•Rotating the outside lever when
not locked by key,
•Rotating the inside lever when
not locked by key
Always fixed
•Pushing the inside button,
•Pushing and turning the inside
button. Turning the button keeps
the outside lever locked until the
button is turned back
Turning the key in the outside
lever
•Turning the key in the outside
lever,
•Pushing the button on the
inside lever
Turning the key in the inside lever
•Turning the key in the inside
lever,
•Turning the key in the outside
lever
Cannot be unlocked
•Turning the key in the outside
lever,
• Rotating the inside lever,
• Closing the door-only when the
button is not turned,
• Turning back the slotted button
Key block feature is released by:
• Rotating the inside lever,
• Closing the door
•Turning the key in the outside
lever,
•Rotating the inside lever (only
when locked by push button),
• Closing the door (only when
locked by push button)
Entrance
AB
F109
Storeroom
D
F86
Service Station
E
F92
Hotel Guest Room
H
F93
Hotel Guest Room
HJ
Classroom
R
F84
T
F90
Dormitory
C
F88
Storeroom *
Always unlockedCannot be locked
Always unlockedCannot be locked
Always fixed Always unlockedCannot be locked
•Turning the key in
the inside lever,
•Turning the key in
the outside lever
Always fixed Key block feature is released by:
•Rotating the inside lever,
•Closing the door
Always unlockedCannot be locked
Turning the key in the outside
lever Always unlockedCannot be locked
Always unlockedCannot be locked
Always unlockedCannot be lockedTurning the key in the inside lever
• Turning the key in the inside lever,
• Turning the key in the outside
lever
•Turning the key in
the inside lever,
•Turning the key in
the outside lever
Description
Function & Diag.
(ANSI No.) Locked by Unlocked by Locked by Unlocked by
Inside Lever
Outside Lever
Latch operated by
Single Keyed
Indicator
Included
No Indicator

7
L
OCK - LEVERS
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside lever could be hazardous or even fatal.
Single
Dummy Trim
2DT
Description
Function & Diag.
(ANSI No.) Locked by Unlocked by Locked by Unlocked by
Inside Lever
Outside Lever
Latch operated by
Communicating*
S
F80
Institutional*
W
F87
L
F76
N
F75
Exit
NX
F89
Patio
P
F77
Exit
Y
Double
Dummy Trim
1DT
•Turning the key in the inside
lever,
•Turning the key in the
outside lever,
•Rotating the inside or
outside lever (if unlocked)
Turning the key in either lever, locks or unlocks its own lever independently.
•Turning the key in the
inside lever,
•Turning the key in the
outside lever
•Rotating the inside lever
•Rotating the outside lever
only when the inside push
button is out
Rotating the inside lever
•Rotating the inside lever,
•Rotating the outside
lever only when the
inside push button is out
Rotating the inside lever
This is a single, surface-mounted lever for an inactive door or a non-latching door
This is a through bolt mounted pair of matching levers for an inactive door or a non-latching door
Turning the key in the outside
lever
Always fixed
Pushing the inside button
Cannot be locked
Turning the key in the outside
lever
Cannot be unlocked
Always fixed
Always unlocked
Always fixed
Pushing the inside button
Cannot be locked
Turning the key in
the inside lever Turning the key in the inside lever
Always fixed Cannot be unlocked
Cannot be locked Always unlocked
Always unlocked
Cannot be locked Always unlocked
•Rotating the inside lever,
•Closing the door Cannot be locked Always unlocked
Cannot be locked Always unlocked
FUNCTIONS
FUNCTIONS
IN
•Rotating inside lever,
•Rotating outside lever
only when not locked by
inside or outside key
Intruder •Turning key in the inside lever,
•Turning the key in the outside
lever
•Turning key in the inside lever,
•Turning the key in the outside
lever
Cannot be locked Always unlocked
Double Keyed (Continued)
Privacy
Passage
Keyless
•Rotating the outside slotted
button,
•Rotating the inside lever,
•Closing the door.
•Rotating the inside lever,
•Rotating the outside
lever

8
HEAVY DUTY
L
Always fixed
FUNCTIONS
Electrically
Locked
DEL
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure quickly unlock the inside lever could be hazardous or even fatal.
Description
Function & Diag.
(ANSI No.) Locked by Unlocked by Locked by Unlocked by
Inside Lever
Latch operated by
Electromechanical
Special
Special*
DEU
XR
Electrically
Unlocked
•Rotating the inside lever,
•Rotating the outside lever only
when power is off,
•Turning the key in the outside
lever
Switching off 24 Volts DC Cannot be locked Always unlocked
•Rotating the inside lever,
•Rotating the outside lever only
when power is on,
•Turning the key in the outside
lever
Switching off 24 Volts DC •Applying 24 Volts DC
•Outside lever remains
unlocked only while power is on
Cannot be locked Always unlocked
Cannot be locked Always unlocked
A
F81
Dormitory or
Storeroom •Rotating the inside lever,
•Rotating the outside lever
only when inside turn button
is in unlocked position,
•Turning the key in the
outside lever
Turning the inside button Turning the inside button
NOTE: Turn button must be manually rotated to unlock the outside lever.
Office
B
F82
•Rotating the inside lever,
•Rotating the outside lever only
when inside push button is out,
•Turning the key in the outside
lever
Pushing the inside button Cannot be locked Always unlocked
NOTE: Push button is released by turning the key in the outside lever, OR rotating the inside lever. Closing the door does not release the push button.
DZ
Closet or
Storeroom •Turning the key in the
outside lever,
•Turning the inside closet
turn knob
Always fixed Cannot be unlocked Closet turn knob
cannot be locked Closet turn knob always free
EA
Entrance or
Office •Rotating the inside lever,
•Rotating the outside lever only
when inside push button is out,
•Turning the key in the
outside lever
•Pushing the inside button,
•Pushing and turning the
inside button. Turning the
slotted button keeps the outside
lever locked until the button is
turned back
•Turning the key in the outside
lever,
• Rotating the inside lever,
• Turning the slotted button back
Cannot be locked Always unlocked
Closet turn knob
cannot be locked Closet turn knob always free
RZ
Closet or
Storeroom Turning the key in the outside
lever Turning the key in the outside
lever
XD
Special*
Turning the key in the inside
lever Cannot be unlocked Always fixed Cannot be unlocked
•Turning the key in the inside
lever,
•Rotating the inside lever
when not locked by key
Always fixed Cannot be unlocked Turning the key in
the inside lever Turning the key in the inside lever
FUNCTIONS
•Turning the key in the outside
lever,
•Turning the inside closet turn
knob,
•Rotating the outside lever
when not locked by key
•Applying 24 Volts DC.
•Outside lever remains locked
only while power is on

9
L
OCK - LEVERS
FUNCTIONS
*ATTENTION: Locksets that secure both sides of the door are controlled by building codes and the Life Safety Code. In an emergency exit
situation, failure to quickly unlock the inside lever could be hazardous or even fatal.
FUNCTIONS
Closet •Rotating the outside lever,
•Turning the inside closet turn
knob
Z
Description
Function & Diag.
(ANSI No.) Locked by Unlocked by Locked by Unlocked by
Inside Lever
Outside Lever
Latch operated by
Special (Continued)
Exit *
YD
Turning the key in the inside lever Cannot be unlocked
Always fixed
Cannot be unlocked
Always fixed
YR
Special * •Turning the key in the inside
lever,
•Rotating the inside lever when
not locked by key
Turning the key in the
inside lever Turning the key in the inside lever
Turning the key in the
inside lever Turning the key in the inside lever
Cannot be unlockedAlways fixed
Special *
DR •Rotating the inside lever only
when not locked by key,
•Turning the key in the outside
lever,
•Turning the key in the inside lever
Hospital
Privacy
Special *
RD •Rotating the outside lever only
when not locked by key,
•Turning the key in the outside
lever,
•Turning the key in the inside
lever
Turning the key in the
outside lever Turning the key in the outside lever
LL
•Rotating the inside lever,
•Rotating the outside lever only
when the inside push button is out
Pushing the inside push
button • Turning the turn button in the outside lever,
• Rotating the inside lever,
• Closing the door
Cannot be locked Always unlocked
Communicating* •Rotating the inside lever-only
when the outside turn button is
in the unlocked position,
•Rotating the outside lever-only
when the inside turn button is in
the unlocked position
Turning the inside turn
button
Turning the inside turn
button
Turning the outside
turn button Turning the outside turn button
NOTE: Do not use this function for rooms that have no other entrance.
Exit •Rotating the inside lever,
•Rotating the outside lever-only
when the inside turn button is in
the unlocked position
Turning the inside turn button
Cannot be locked Always unlockedTurning the inside turn button
Cannot be locked Always unlocked Closet turn knob
cannot be locked Closet turn knob
is always free
M
F78
Q
F83

10
HEAVY DUTY
L
CORMAX
™
8KL5 Deadlocking Latch
Bolt throw –
9
/ 16 ”
Backset – 5”
Front – 2
1
/ 4 ” x 1
1
/ 8 ” beveled.
Tube – To fit 1” diameter hole in door edge.
To order: (with unit) designate “9K5” on
How to Order (page 3).
To order: (without unit) designate
“8KL5-SL” (Spring Latch) or DL
(Deadlocking Latch) and finish.
8KS2 Strike (Supplied Standard)
Dimension: Conforms to ANSI A115.2
for 1
3
/ 8 ” doors (2
3
/ 4 ” x 1
1
/ 8 ” with
curved lip and box).
To order: (with unit) designate
“STK” on How to Order (page 3).
To order: (without unit) designate
8KS2 and finish.
8KL4 Deadlocking Latch
Bolt throw –
9
/ 16 ”
Backset – 3
3
/ 4 ”
Front – 2
1
/ 4 ” x 1
1
/ 8 ” beveled.
Tube – To fit 1” diameter hole in door edge.
To order: (with unit) designate “9K4” on
How to Order (page 3).
To order: (without unit) designate
“8KL4-SL” (Spring Latch) or DL
(Deadlocking Latch) and finish.
DEADLOCKING LATCHES & STRIKES
8KL3 Deadlocking Latch
Bolt throw –
9
/ 16 ”
Backset – 2
3
/ 4 ”
Front – 2
1
/ 4 ” x 1
1
/ 8 ” beveled.
Tube – To fit 1” diameter hole in door edge.
To order: (wit h unit) designate “9K3” on
How to Order (page 3).
To order: (without unit) designate
“8KL3-SL” (Spring Latch) or DL
(Deadlocking Latch) and finish.
8KS3 Strike
Dimension: Conforms to ANSI A115.2
for 1
3
/ 4 ” doors (4
7
/ 8 ” x 1
1
/ 4 ” with
curved lip).
To order: (with unit) designate
“S3” on How to Order (page 3).
To order: (without unit) designate
8KS3 and finish.
DEADLOCKING LATCHES & STRIKES
8KS3–7/8 Flat Strike
Dimension: Conforms to ANSI A115.2
for 1
3
/ 4 ” doors (4
7
/ 8 ” x 1
7
/ 8 ” flat)
To order: (with unit) designate
“S3-
7
/ 8 ” on How to Order (page 3).
To order: (without unit) designate
8KS3-
7
/ 8 and finish.
CORMAX
™
PATENTED KEYING SYSTEM
BEST
®
CORMAX
™
is the premier patented keying system offered by Stanley Security Solutions.
CORMAX will meet your needs for security, key control, and convenience. A simple solution with
no compromising allowed.
CORMAX is the upgrade path for existing BEST Standard, Premium, and MX8 customers; and
it is an essential element of non-residential access control as security administrators strive to
eliminate the unauthorized duplication of keys.
CORMAX offers the following features and benefits:
• A long-term US utility patent that guarantees the extended useful life of the system through 2027.
• A second, independent locking mechanism that utilizes a patented set of built-in side pins to provide higher security.
• Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature.
• CORMAX cores and keys are available exclusively through Stanley sales offices. Key blanks are only sold to individuals authorized by the
customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer’s facility.
• CORMAX cores are certified to meet the security, safety, and reliability requirements of BHMA A156.5 Grade 1.
• Picking and drilling resistance options are available if higher levels of security are desired.
• Complete factory masterkeying service offered, and at no charge with purchase of BEST locksets and PHI exit devices.
• Keyways are organized in families of four keyways each, with double-milled and quad-milled key levels to facilitate the design of
masterkey systems in multi-building campuses.
• BEST CORMAX cores are compatible with all existing BEST interchangeable core housings, eliminating the need for new or
modified locksets.
CORMAX
™
Patented Keying System

11
L
OCK - LEVERS
STK strike (standard) S3 strike 9K door preparation with
through-bolt mountings
SAMPLE SPECIFICATION ACCEPTABLE MANUFACTURERS
A. Locksets and Latchsets
Stanley/BEST - No Substitution.
1.Locksets and latchsets: ANSI A156.2, Series 4000, Grade 1 UL listed, extra heavy-duty cylindrical type.
2.Backset 2
3
/ 4 inches (70mm)
3.Interchangeable core 7-pin: [Restricted keyway] [Patented] [Standard] [__________].
4.Locksets to have anti-rotational studs that are through-bolted.
5.Keyed lever with no exposed keeper hole.
6.Each lever to have independent spring mechanism designed to control lever only.
7.Outside lever sleeve seamless, 1-piece construction, hardened steel alloy.
8. Keyed Lever: Removable only after core is removed, by authorized control key, to allow access to knob keeper
9.Hub, side plate, anti-rotational studs 1-piece casting with shrouded locking lug.
B. Keys and Keying
A.Cylinders: 7-pin, interchangeable core and keyed into a [New] [Existing] factory registered Grand Masterkey System
with a [Standard] [Restricted] [Patented] keyway.
1. Acceptable Material: Cylinders as manufactured by Stanley/BEST.
B.Provide construction cores and keys during construction period. Construction control and operating keys and cores are
not part of permanent keying system or furnished on same keyway (or key section) as permanent keying system.
C.Permanent Keys and Cores: Prepare permanent cores and keys in accordance with keying schedule. [Stamp with
applicable key mark for identification.] [Do not stamp.] [__________].
D.Provide Grand Masterkeys, Masterkeys and other Security Keys.
E.Furnish keys in the following quantities:
1. [4] [_______] each Grand Masterkeys.
2. [4] [_______] each Masterkeys per set.
3. [2] [_______] each Change keys each keyed core.
4. [6] [_______] each Construction masterkeys.
5. [2] [_______] each Control keys.
6. Install permanent cores in locksets.
F. Return construction cores to [{Stanley/BEST} factory representative] [Hardware manufacurer’s representative].
SAMPLE SPECIFICATIONS
STRIKES & DOOR PREPARATION
STRIKES & DOOR PREPARATION

12
SERVICE EQUIPMENT
For more information on Stanley Security Solutions’ products, services, and office locations visit our web site at www.stanleysecuritysolutions.com
Stanley Security Solutions, Inc.
6161 E. 75th Street Indianapolis, Indiana 46250
©2013 Stanley Security Solutions, Inc. • www.stanleysecuritysolutions.com
Product information contained in this catalog has been compiled and presented with as much care and completeness as is reasonably possible.
Errors or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in
error or which may be subject to changes or modifications by the manufacturer without notice and without obligation. Therefore, no guarantee can
be made or should be assumed or implied with regards to product information contained in this catalog.
10M 113
BAS008
SERVICE EQUIPMENT
KD304A Boring Jig Kit
The KD304A jig kit is made for boring cut-outs in wooden doors
for Fed. Spec. 160 and 161 series cylindrical/tubular locksets,
doors 1
3
⁄ 8 ” to 2
1
⁄ 4 ” thick. The KD304A kit includes the boring jig (to
drill wood doors for 2
3
⁄ 8 ”, 2
3
⁄ 4 ”, 3
3
⁄ 4 ”, and 5” backsets), a quick-
release adaptor for
3
⁄ 8 ” drill chuck, a
2
1
⁄ 8 ” bit, and a 1” diameter x 9” bit.
The following kit items can also be purchased separately.
KD309 – 2
1
⁄ 8 ” bit
KD318 – 1” dia. x 9” bit
KD319 –
3
⁄ 8 ”, quick release adaptor
To order complete kits specify: KD304A Kit
KD312 and KD315 Face Plate Marking Chisel and KD325 Strike
Plate Location Pin
The KD315 face plate marking chisel (which locates the mortising
for the faceplate) and the KD325 strike locating pin (which centers
the strike for proper installation) and is used for Fed. Spec. 161
cylindrical lockset, (1
1
/ 8 ” x 2
1
⁄ 4 ”), and BEST
®
series 82T & 83T
tubular locks. The KD312 face plate marking chisel is available for
Fed. Spec. 160 (1” x 2
1
⁄ 4 ” ) preparation.
To order specify:
KD312– face plate marking chisel 1” (160)
KD315– face plate marking chisel 1
1
/ 8 ” (161)
KD325– strike plate locating pin
KD303 Through-Bolt Drill Jig
Special accessory jig aids in aligning
5
/ 16 ” holes for through-bolt
mounting. Install the latch first, then insert jig in 2
1
/ 8 ” bored hole,
align with door edge and drill with
5
/ 16 ” drill bit.
To order specify: KD303.
KD317 Spanner Wrench and KD340 Spring Tool
All 9K locksets require the use of KD317 spanner wrench for door
removal. This tool is included 1 per every 9 locksets with your
order. If more are needed, desnate KD317 on
your order. The KD340 lever return spring tool with its unique
design feature is used
when replacing the 9K lever return spring.
To order specify: KD340. KD340
Spring Tool
KD317
Spanner Wrench
KD303-9K
KD304A with case
KD304A parts
KD315
(Fed. Spec. 161) KD325

2/5/2015 BestAccessSystems.comCommercialsecuritysolutionsproviderfordoorlocksandhardware,electronicaccesssystemsandkeycontrol.
http://www.bestaccess.com/products/warranty/warranty.asp 1/2
Warranty STANLEYB.A.S.I.S.Warranty
StanleySecuritySolutions
Warranty
LIMITEDWARRANTY
Exceptasotherwiseprovidedbelow,STANLEYwarrantsthatallProductsmanufacturedbySTANLEYandsoldunderitstrade
names“BEST”and"STANLEY”arefreeofdefectsinmaterials,workmanshipandoperation,normalwearandtearexcepted,fora
periodofthree(3)yearsfromthedateofsaletotheoriginalpurchaser.TheliabilityofSTANLEYunderthiswarrantyislimited
totherepairorreplacementofanyProductcoveredbythewarranty.Writtennoticeofaclaimunderthiswarrantyshouldbe
mailedtoSTANLEYSECURITYSOLUTIONS,P.O.Box50444,Indianapolis,IN46250.Thenoticeshouldincludeinformationas
totheidentityoftheProductanditsdefectalongwithacustomercontactname,companyname,address,andphonenumber.
STANLEYwillthenprovideshippingdirections,withallshippingchargesprepaidbyyou.STANLEYwillthencausetheProduct
tobeexaminedand,iffounddefectiveandcoveredunderthiswarranty,willrepairorreplacesaidProductatthesolediscretion
ofSTANLEY.WarrantyserviceshallonlybeprovidedintheUnitedStates.
9KMechanicalCylindricalLockwarrantytermshallbeseven(7)yearsfromthedateofsaletotheoriginalpurchaser.
45H/47HMechanicalMortiseLockWarrantytermshallbelimitedlifetime.48H/49HMortiseDeadlockandall45HWand47HW
ElectromechanicalMortiseLockwarrantytermshallbefive(5)yearsfromthedateofsaletotheoriginalpurchaser.
BEST93KQ,45HQandEXQlocksusingtheStanleyWiQ™WirelessTechnologyshallbethree(3)yearsfromthedateofsaleto
theoriginalpurchaser.StanleyPortalGateways,WirelessAccessControllers,AntennasandotherproductsusingStanleyWiQ™
WirelessTechnologynotspecificallymentionedshallbeone(1)yearfromthedateofsaletotheoriginalpurchaser.

Software
NT500,StanleyWiQ™Technology,andB.A.S.I.S.SoftwareWarrantySTANLEYwarrantsthatallCDROMandhardwarekeys
shallbefreefromdefectsinmaterialandworkmanshipandwillfunctioninsubstantialaccordancetothespecificationsfora
periodofone(1)yearfromthedateofinstallation.
SpecificLimitations:
ThewarrantyforallNT500,StanleyWiQ™Technology,andB.A.S.I.S.SoftwareProductsdoesnotcover,freeofcharge,any
postsalestechnicalsupportduringthewarrantyunderthefollowingcircumstances:
CallsfromsubcontractorsnotauthorizedbySTANLEY
Problemscausedbymisuseofsoftwareorhardware.
Failuretoprovideanetworkconnectionorsitephonelineforamodemconnection,ifdeemednecessarybySTANLEY.
Technicalsupportforthirdpartysoftwareorhardwareproducts.
Technicalsupportfornetworksoftwareproducts.
Supportfortheitemsaboveduringnormaltechnicalsupporthourswillbeprovidedatanhourlyrateof$150,billableinone
(1)hourincrements.Forprearranged,afterhourssupport,pleasecallforquote.

GENERALLIMITATIONSOFWARRANTY
Thiswarrantyspecificallyexcludes,andSTANLEYshallnotbeheldresponsiblefor,damagecausedbyProductmalfunctionor
failureattributabletoactsofGod,improperuseorinstallation,poorornomaintenance,workperformedbyotherthanan
AuthorizedSTANLEYtechnician;failuretofollowSTANLEY’soperatinginstructionsorenvironmentalspecifications,modification,
vandalism,shippingand/orhandling,improperstorage,accident,abuseoranyothercausenotwithinthecontrolofSTANLEY
otherthanordinarywearandtear.
STANLEYprovidesnowarrantyorguaranteethatitscoresand/orcylinderswillfunctionproperlyorbemechanicallycompatible
withproductsnotmanufacturedbySTANLEY.


THIRDPARTYWARRANTY
Exceptasotherwiseprovidedabove,STANLEYmakesnowarranty,expressorimplied,withregardtothirdpartyhardwareor
softwareandexpresslydisclaimstheimpliedwarrantiesorconditionsofmerchantabilityor,merchantablequality,fitnessfora
particularpurpose,title,infringementandthosearisingbystatuteorotherwiseinlaw.Customer’ssolerecourseforwarranty
claimsiswiththemanufactureroftheProduct.However,STANLEYagreestopassthroughanythirdpartywarrantythat
Home Products Documents Support Company RemoteSupport KnowledgeBase

2/5/2015 BestAccessSystems.comCommercialsecuritysolutionsproviderfordoorlocksandhardware,electronicaccesssystemsandkeycontrol.
http://www.bestaccess.com/products/warranty/warranty.asp 2/2
©2010StanleySecuritySolutions,Inc.
6161East75thStreet|Indianapolis,IN|46250
Tel3178492250|CustSrv8553652407
STANLEYreceivesfromthemanufactureroftheProductstobuyer.Theextentofanythirdpartywarrantydetails,termsand
conditions,remediesandproceduresmaybeexpresslystatedon,orpackagedwith,orotherwiseaccompanyingtheProducts.
EXCEPTASSETFORTHHEREIN,STANLEYMAKESNOWARRANTIES,EXPRESSEDORIMPLIED,ANDBUYERACKNOWLEDGES
THATNOREPRESENTATIONS,WARRANTIES,PROMISESORSTATEMENTSHAVEBEENMADEBYSTANLEY,WITHRESPECTTO
THISPRODUCT,ORANYPARTORPORTIONTHEREOF.INADDITION,STANLEYMAKESNOWARRANTYOFMERCHANTABILITYOF
THISPRODUCTORANYPARTORPORTIONTHEREOF,FORANYPURPOSE,NORANYWARRANTYWHICHEXTENDSBEYONDTHE
DESCRIPTIONONTHEFACEHEREOF.STANLEYSHALLNOT,INANYEVENT,BELIABLEFORANYCONSEQUENTIALOR
INCIDENTALDAMAGESSUFFEREDBYBUYERORANYONECLAIMINGBY,THROUGHORUNDERBUYER,ASARESULTOFTHE
CONDITIONOFTHISPRODUCT,ORANYPARTORPORTIONTHEREOF,ANDTHEREARENOORALORWRITTENUNDERTAKINGS
ORAGREEMENTSOFANYTYPEPROVIDEDBYSTANLEYEXCEPTASEXPRESSLYSETFORTHHEREIN.SOMESTATESDONOT
ALLOWLIMITATIONSONHOWLONGANIMPLIEDWARRANTYLASTSORPROHIBITTHEEXCLUSIONORLIMITATIONOF
INCIDENTALORCONSEQUENTIALDAMAGES,SOTHEABOVELIMITATIONANDEXCLUSIONSMAYNOTAPPLYINYOURSTATE
CorporateBrochure
DownloadthisCorporate
Brochurehere
MechanicalAccess
DownloadthisBrochure
here

602 S. 65th Ave. / Phoenix, AZ 85043 / Phone: [phone] / Fax: [phone]
Warranty
Hollow Metal Xpress (HMX) guarantees all doors and frames manufactured for a period of
one year:
to be of good material and workmanship,
to be free of defects that would render them unfit for use in the intended manner.
Hollow Metal Xpress will – at its option – without charge to the client:
Repair any defective door or frame OR
Replace any defective door or frame as originally sold OR
Refund the purchase price of the defective door or frame.
Warranty is applicable only when the doors and frames have been installed in accordance
with the recommended installation instructions provided by HMX and what is normally
considered good practice in the building industry. Warranty is applicable only to doors and
frames that have been used in what is considered normal use in the building industry.
Any claim against this warranty must be made within 30 days of discovery. Any claim
against this warranty must be made in writing to HMX.
This Warranty does not cover labor, installation costs, finishing costs, indirect or
consequential damages.
Unauthorized back charges will not be accepted. HMX is not responsible for repair or
replacement claims unless prior written authorization to repair or replace was given.

IVES .
WS406CVX & WS407CVX
Wall Bumpers
WS406CVX Wall Bu mpers
WS406CCV
WS407CVX
~ WS407CCV
Constructed in st u rdy yet economica l wrought base of brass
or sta l nless steel construction .
Feature con c ealed tamper-proof mounting.
Mttts ANSl/BHMA l 56.16 L22201 f'o r brass ,
and L52101 for sta i nless steel.
Shipped factory preassembled backplate to reduce I nstallation cost.
Easy Installation by Inserting screwdriver through small hole in rubber .
WS406CCV & 'NS4-07WJ
MeetsANSl/BHMA 156.16L22251 fo r brass
and and LS2251 fo r stainless slffl .
WS406CVX {406)- convex rubber bumper, packed wi th wood screw
and plastic anchor .
WS406CCV (406-1/2)- concave rubber bumper, wh i ch avo i ds damage t.o locks with
projecting buttons, packed with wood screw and plastic anchor.
WS407CVX (407) - convex rubber bumper packed with screw and drywa ll anchor .
WS407CCV (407-1 / 2) - concave rubber bumper wh i ch avoids damage to locks with
projecting buttons and is packed with screw and drywall anchor .
Dim ensi o ns
Base Diameter :2-1/2"
Base Thickness : 3/ 8"
Overall Projection : l "
Fi nish es brass
Ives Number US3
US4
BHMA 605 606
Finish es stainless steel
Ives Number US320
BHMA 630
USS* USlO
612
• only available on W540 7 CVX Slim-Pok of 15
· • available on W5407CCV or W5407CVX Slim-Pak of 15
USlOB USlS USlSA *" US26
US26D
8716'"*
613 619 620 625
626
USA 1. 877 . 613 . 8766 I Canada 1.90~ . 403 . 1800 I www .l ves .i ngersollrand . com

Ives Architectural hardware products
B14
Protection Plates
B14
Pulls & Plates
A
Hinges & Pivots
C
Flush Bolts & Coordinators
D
Latches, Catches & Bolts
E
Stops
F
Exterior Hardware
G
Miscellaneous Hardware
8400 Series Protection Plates
  • Doorprotectionplatesareavailablein.050”thickbrass,stainless
steel or aluminum; and 1/8” thick high impact polyethylene in clear
or black.
  • Beveledgeoptions;specifyB4Eforallfouredges.
  • Mountingscrewpackfurnishedstandard,16screwsperpack.
Optional screw packs are available for TEK or TORK screw heads.
Refer to the following chart for ordering.
  • SpecifyNMHfornomountingholes.(Notavailableon8402)
  • SpecifyNMH-Afornomountingholeswithadhesive.(Notavailableon8402)
  • SpecifyCSforcountersunkmountingholes.
  • SpecifyERSpreppedwithextrarowofscrews.
Kickplate Gasket Tape Tape is recommended when using a
brass plate on a metal door to reduce tarnishing from electrolytic
oxidation. One tape pack will cover an the perimeters of a 8” x 34”
kickplate. Order 8401 Gasket Tape.
8400 Protection Plate
8402 (UL)* Protection Plate
*UL mark appears in upper right corner. Factory supplied screws must be used.
Number of screw packs required by plate size (specify TEK Screws or TORK screws).
22”-25” 26”-33” 34”-41” 42”-48”
4”-8” 1 1 1 1
9”-16” 1 1 1 1
17”-24” 1 1 1 2
25”-32” 1 1 2 2
33”-40” 1 2 2 2
41”-48” 2 2 2 2
Finishes brass 24” x 48” max. size
US Number US3 US4 US10 US10B US15 US26 US26D
BHMA 605 606 612 613 619 625 626
Finishes stainless steel
US Number US32 US32D
BHMA 629 630
Finishes aluminum
US Number US28
BHMA 628
Finishes plastic
Clear and Black
Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619,
PA716, B3, B505, B619, B716

Ives Architectural hardware products
B18
Protection Plates
B18
Pulls & Plates
A
Hinges & Pivots
C
Flush Bolts & Coordinators
D
Latches, Catches & Bolts
E
Stops
F
Exterior Hardware
G
Miscellaneous Hardware
Mop Plates
  • Protectthebottomofthepullsideofdoorsubjecttocleaning
and mopping procedures.
  • SizeRanges:4”to6”high,22”to48”wide
Kick Plates
  • Protectthebottomofthepushsideofdoorssubjectto
scuffing from foot traffic.
  •Recommendedforalldoorssubjecttonormaluse
(especially doors using a closer).
  • SizeRanges:8”to24”high,22”to48”wide
Stretcher Plates
  • Protectdoorsatspecificareaswhereconsistentcontactis
made by stretchers, service carts or other equipment.
  • Usuallyappliedtopushsideofdoors.
  • Specify“B4E”Optionforbevelededges.
  • SizeRanges:6”to8”high,22”to48”wide
Armor Plates
  • Protectlowerhalfofdoorsfromabusebyhardcarts,
trucks and rough usage.
  • Usuallyappliedtopushsideofsingledoorsandbothsides
of double acting doors.
  • SizeRanges:26”to48”high,22”to48”wide

Price Book 23A
Effective May 3, 2004
140
Warranty
Ives (the "Company") warrants only to Customer that
the products will be free from defects in material and
workmanship for a period of 12 months from the date
of shipment of the products. The Customer shall be
obligated to promptly report any failure to conform to this
warranty in writing to the Company within the warranty
period provided above. Company’s sole obligation under
this warranty is limited to repairing or replacing, at its
option, the defective products.
NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
ARE MADE WITH RESPECT TO THE PRODUCTS
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
The provisions of this limited warranty do not apply to
products: (i) used for the purposes for which they are not
designed or intended; (ii) which have been repaired or
altered without Company's prior written consent; (iii)
which have been subjected to misuse, abuse, negligence,
or accident; (iv) which have been improperly stored,
installed, maintained, or operated; (v) which have been
used in violation of written instructions provided by
Company to Customer; (vi) which have been subjected
to improper temperature, humidity, or other environmental
conditions; (vii) which have been affected by normal
wear and tear; or (viii) which, based on Company's
examination, do not disclose to Company's satisfaction
nonconformance to the warranty.
The following costs and expenses are not covered by the
provisions of this limited warranty: (i) labor costs for the
removal and reinstallation of products; (ii) shipping and
freight expenses required to return products to Company;
(iii) normal maintenance; and (iv) economic losses. In
addition, the provisions of this warranty are not applicable
to anything other than defects in Company’s material
(products only) or workmanship.
CONSUMER PRODUCTS. With respect to "consumer
products" as defined under the Magnuson-Moss Warranty
Act ("MMWA"), the following statements are made. (a)
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not
apply to you. IF ANY IMPLIED WARRANTY IS PROVIDED
UNDER THE MMWA, IT IS LIMITED TO THE DURATION
OF THE WARRANTY PROVIDED ABOVE. (b) Some states
do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you. (c) This warranty gives
you specific legal rights and you may also have other
rights which vary from state to state.
IVES WARRANTY