Steelcase FRAMEONE FE-3 User manual

Page 1 of 5
FRAMEONE
Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table
®
May 2009
FE-3 Screen + Table
1. Fix the Connection Bracket to the Straight Bracket
by tightening two M6 screws each.
Install as left and right configuration as shown.
Loosen the set screws but do not remove it.
2. Remove both FE-3 screen bottom caps.
2
1
FE-3
Screen
Loosen Set
screws
Connection
Bracket
Straight Bracket

Page 2 of 5
FRAMEONE
Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table
®
May 2009
FE-3 Screen + Table
3. Slide the Straight Brackets into the side slots of the FE-3
Screen as shown.
4. Re-install both bottom caps of the FE-3 Screen.
3
4

Page 3 of 5
FRAMEONE
Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table
®
May 2009
FE-3 Screen + Table
5. Refer to the diagram on the right to define the desired
height for the screen.
6. Align the middle Set Screw to the desired Screen Height
guide hole. Tighten this screw to lock it to the guide hole.
Then, tighten the rest of the Set Screws to secure the bracket.
Align the opposite bracket to the same height and repeat
this step.
H1080 H1175 H1270
360
411
360
601
455
506
550
411
645
316
740
221
455
316
550
221
HighestLowest
H1080 H1175 H1270 H1365 H1460
HighestLowest
H800 (H771) FE-3 Screen
H1000 (H963) FE-3 Screen
6
5
Screen Height
guide hole
Screen Height Guide Hole
This hole functions as a guide to
determine the overall height of the FE-3
screen installed to the FrameOne desk.
Note:
Lowest Guide Hole = Highest Screen Position
Middle
Set Screw

Page 4 of 5
FRAMEONE
Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table
®
May 2009
FE-3 Screen + Table
7. Position the FE-3 screen to the table.
The screen bracket should be attached to the
understructure of the table.
Make sure that the side of the screen is flush
with the side of the table top.
8. Tighten two M6 screws with its rectangular
plate on each bracket as shown.
Make sure it is fixed securely.
M6 Screw
Rectangular Plate
7
8

Page 5 of 5
FRAMEONE
Assembly Instruction - 800/1000H FE-3 Screen on a Straight Table
®
May 2009
FE-3 Screen + Table
9. View of the completed installation of FE-3 Screen
to a FrameOne straight table.
9