Steelcase Flex Series User manual

Steelcase®Flex Collection - Height Adjustable Desk pg. 5, 8-22
Desk Curve Screen pg. 6, 23-26
Height Adjustable Desk
Optional
Desk Curve Screen Cable Manager
Cable Manager pg. 7, 27
2x
2x
T-27 5mm
T-20

WARNING
RISK OF SERIOUS INJURY DUE TO PINCH POINTS, TIPOVER, OR POTENTIAL COLLAPSE.
RISK OF DEATH OR SERIOUS INJURY.
DO NOT ALLOW USE BY CHILDREN
MAINTAIN >1” (25mm) GAP ABOVE OBJECTS ON DESK AT MAX
HEIGHT AND BETWEEN THE DESK & ADJACENT OBJECTS.
CRUSH HAZARD - DO NOT PLACE FEET, LEGS OR OTHER BODY
PARTS ON OBJECTS PLACED UNDER TABLE TOP OR BELOW
MODESTY PANEL.
DO NOT OPERATE THIS EQUIPMENT
Max.
Min.
X
X
?
INSPECT REGULARLY.
IMPORTANT SAFETY INSTRUCTIONS:
Read all instructions before using this furnishing. Please save these instructions.

RISK OF SERIOUS INJURY:
WORKSURFACE
OVERHANG
C
L
+
WORKSURFACE
WIDTH
WORKSURFACE
DEPTH
MANDATORY REQUIREMENTS REGARDLESS OF WORKSURFACE MATERIAL OR CONSTRUCTION:
BASE-ONLY
WARNING
≥ ≤

IMPORTANT SAFETY INSTRUCTIONS
The desk or table shall be installed near power socket & the plug shall be easily accessible.
POLARIZED PLUG INSTRUCTIONS (Only for Products with Polarized Plug) -
GROUNDING INSTRUCTIONS (For Grounded Products only) -
OPERATING INSTRUCTIONS
Products with Grounded Plugs
Products with Polarized Plugs
WARNING - Risk of electrical shock.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
PLEASE SAVE THESE INSTRUCTIONS, AND THE USER GUIDE, IN AN OBVIOUS PLACE FOR THE END USER AFTER ASSEMBLY.
INSTRUCTIONS FOR DOUBLE INSULATED PRODUCTS:
WARNING - Risk of fire and shock. Use only type SJT 18 AWG cord.

Parametric Rail
Cantilever Set x 2
COMPONENTS
1220969001 HARDWARE KIT
#8-10 x 3/4"
x6
Worksurface
(46", 58" or 70" in width
23", 24", 29" or 30" in depth)
These drawings identify the parts included with your Height Adjustable Table. Some of these parts are considered
by regulatory bodies to be critical components.
If any parts shown here do not match your order, please contact Steelcase at www.steelcase.com/contact-us
#10-9 x 7/8"
x25
Wire Manager
Clip
x2
M6 x 1 x 12
x12
M6 x 1 x 16
x8
Grommet - 70mm
x1
Grommet - 44mm
x1
Adjustable Clamp
x2
End Cap x 2
Foot Set x 2
Lifting Column x2
Standard 10'
Power Cord x1
Shorter 9"
Power Cord x1
(When Power Bar is ordered)
Chicago 9'
Power Cord x1
2 Leg Cable Package
58"W or smaller x1
2 Leg Cable Package
Greater than 58"W x1
Control Module x1
Active Touch
Switch x1
Simple Touch
Switch x1
Simple Touch
Switch - AM x1
Desk Component List OPTIONAL
User Guide x1 Troubleshooting
Guide x1
Power Bar
46”W to 57.99”W
Power Bar
M6 x 1 x 16 Bolt
x8
Brake Plate
x2
Overmold Brake
x2
58”W and greater
1246992001 (Power Bar - 3 plug)
1246992003 (Power Bar - 3 plug, Chicago)
1246992002 (Power Bar - 5 plug)
1246992004 (Power Bar - 5 plug, Chicago)
1359622001 (Hardware Kit - 8 M6x1x16)
1355965001 (Brake Plate - 2)
1282509001 (Electrical Package - Extended Height)
1282509002 (Electrical Package - Extended Height, Chicago)
1282509003 (Electrical Package - Basic Height)
1282509004 (Electrical Package - Basic Height, Chicago)
1307690001 (24"D Ext Ht)
1307690002 (30"D Ext Ht)
1307690003 (24"D Basic Ht)
1307690004 (30"D Basic Ht)
1317689001X (Veneer)
1314009001X (Laminate)
116452901001 (Plywood)
1307689001 (Brace Package), including hardware

COMPONENTS
1218269001 HARDWARE KIT
M4x10
x3
These drawings identify the parts included with your Height Adjustable Table. Some of these parts are considered
by regulatory bodies to be critical components.
If any parts shown here do not match your order, please contact Steelcase at www.steelcase.com/contact-us
#10-9 x 7/8"
x6
Screen Component List
Screen Assembly
x1
Magnet Holder
x3
Magnet
x3
Table Bracket
x3
DISCLAIMER:

COMPONENTS
1280049001 HARDWARE KIT
#10-16 x 1/2"
x5
These drawings identify the parts included with your Height Adjustable Table. Some of these parts are considered
by regulatory bodies to be critical components.
If any parts shown here do not match your order, please contact Steelcase at www.steelcase.com/contact-us
Washer
x5
Sta Fast Joint
Connector Bolt
x2
Cable Tray Component List
Cable Tray
x1

1a
1a
1b
1b
8x
10 Nm
(88.50 in-lbs)
1b

8x
10 Nm
(88.50 in-lbs)
1b
1a
1a
1b
1b
1c
1c 1d
1d

2a
12x
7.5 Nm
(66.38 in-lbs)
2a
2b
2b
2c
2c
2c2b
A1 B1
A2
B2