Sundstrom SR 200 Technical manual

2020-04-08
OI03H-1018 SR 200 Airline 1
Operation instruction
SR 200 Airline
Compressed air-line full face mask
Revision: 04

General information
Instructions for use for SR 200 Airline should be read before use.
SR 200 can be used in three different configurations:
In application with filters from Sundström in accordance with EN 136:1998.
In application with fan unit SR 500 or SR 700 in accordance with EN 12942:1998 class TM3.
SR 200 Airline is a compressed air full face mask with filter backup in accordance with EN 14594:2005.
When selecting equipment for SR 200 Airline some of the factors that should be considered are as follows:
• Type of pollutant
• Concentrations
• Work intensity
• Protection requirements in addition to respiratory protective advice.
Risk analysis should be carried by a person who has suitable training and experience in the area.
2020-04-08
OI03H-1018 SR 200 Airline 2

Breathable air
Breathable air shall meet at least the following purity requirements:
• the pollutants shall be maintained at a minimum and must never exceed the hygienic limit value.
• the content of mineral oil in the air must be so low that the air will have no oil smell (the threshold of smell is
around 0.3 mg/m3 ).
• the air shall have a sufficiently low dew point to avoid internal freezing of the equipment.
In the event of uncertainty as to whether the above demands have been met, a filter such as the Sundström
type SR 99-1 compressed air filter should be connected.
2020-04-08
OI03H-1018 SR 200 Airline 3

Unpacking SR 200 Airline
Packing list:
• Facepiece with breathing hose
• Control valve
• Belt
• Sealing plug
• Sealing cover
• Pre-filter holder
• Flow meter
• Filter adapter
• User instructions
2020-04-08
OI03H-1018 SR 200 Airline 4

1. Check before use
2020-04-08
OI03H-1018 SR 200 Airline 5
1.1 Check that the mask is
complete, correctly
assembled, thoroughly
cleaned and undamaged.
Check particularly carefully
the inhalation and exhalation
membranes and their seats.
The membranes are
consumables and must be
replaced if there are any
signs of damage or ageing.
1.2 The membranes are
consumables and must be
replaced if there are any
signs of damage or ageing.
Check the condition of the
head harness. The head
harness is a consumable item
and should be replaced if
there are any signs of wear or
reduced elasticity.
1.3 Check that the seal at the
bottom of the filter connection
is in good condition.