Sunjoy L-GZ501PST User manual

Assembly Instructions
Item# L-GZ501PST
GARDENIA GAZEBO

IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use and care
directions before attempting to assemble.
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are
involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by
lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly
even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as damage may occur
to the structure.
5. Never barbecue under this gazebo or use lanterns that contain open flames.
6. This package contains small items and plastic bags that should be kept away from children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so
before use so as to avoid collapsing or damage to the item, which could result in injury.
8. WARNING: Keep flame and heat sources away from the gazebo fabric. The fabric may burn if
it is exposed to prolonged contact with a source of heat. The application of any foreign
substance to the gazebo fabric may render the flame-resistant properties ineffective.
9. WARNING: Please take down the gazebo during strong wind. The manufacturer or retailer is
not liable for any loss of the product or other items due to the failure to take down the gazebo
during strong wind.
Tools required: Ladder, Hammer, and Screwdriver (not included)

Top Connector A 1
Top bar B 6
Connector C 6
Beam D 6
Pole 1 E 1
Pole 2 F 1
Pole 3 F1 1
Pole 4 G 2
Pole 5 E1 1
Stake Connector 1 H 2
Stake Connector 2 I1 2
Stake Connector 3 I2 2
Sun shade frame J 1
Sun shade panel
Connector K 2
Space part K1 2
Fence L 4
Shelf M 1
Shelf support N1 1
Shelf support N2 1
Small Canopy O 1
Big canopy P 1
Sun Shade Canopy Q 1
Parts List

AA M5x15 Bolt 44PCS
BB M5 Washer 44 PCS
Hardware Pack 1
Fig.1: Insert the plug of Fence (L) into the hole of Pole (E & F), then pull downward the Fence (L), assemble
other Fences (L) same way with Pole (E1/ F1/G).
Fig.2: Use bolt (AA) & washer (BB) to fix Connector (C) on top of Poles (E/E1/F/F1/G).
Fig.3: Use bolt (AA) & washer (BB) to tighten Beam (D) with Connector (C).
Fig.4: Use bolt (AA) & washer (BB) to fix Stake connector 1 (H) on Pole (F/ F1) & Fence (L).
Fig.5:Use bolt (AA) & washer (BB) to fix Stake connector 2 & 3 (I1 & I2) on Pole (F/ F1/ G) & Fence (L).

AA M5 x15 Bolt 6 PCS
BB M5 Washer 8 PCS
CC M6 x 35 Bolt 6 PCS
DD M6 Nut 8 PCS
GG M6 Washer 14PCS
EE M5 x 45 Bolt 2 PCS
FF Ф8 x 180 Stake 8 PCS
Hardware Pack 2
Fig.6: Use bolt (CC), washer (GG) & nut (DD) to connect Top bar (B) with Top Connector
(A).
Fig.7: Insert end of Top bar (B) into Connector (C);
Place Big canopy (P) on Top bar (B), do not lay out now;
Place Small canopy (O) on small top; lay out the Big canopy (P).
Fig.8: Use bolt (AA) & Washer (BB) to fix Shelf (M) and Shelf support (N1,N2) to Pole 1 &
2 (E & F).

Fig.9: Use bolt (AA) & Washer (BB) to tighten Shelf support (N1) to Shelf (M).
Fig.9-1: Use bolt（AA）and Washer（BB）tighten Shelf support（N2）to Shelf（M）.
Fig.10: Follow the arrow direction to stick Sun Shade Canopy (Q) to Sun shade frame (J).
Fig.13 & Fig.14: Use Stake (FF) to fix the gazebo to ground.
Fig.10-1:Use bolt（EE）and Washer（BB）go through Space part（K1）to fix Sun shade panel to Pole 1
（E）Pole 1 & 2 (E & F).
Fig.11: Use Nut (DD) & Washer (GG) to fix Sun shade panel connector (K) on Sun shade panel (J).
Fig.12: Put Sun shade panel connector (K) on the pin of Pole 1 & 2 (E&F) to support Sun shade panel. (J).

USE & CARE
1. This Gazebo is not a permanent structure and should be disassembled & stored away after
use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must be assembled by two adults or more.
4. If windy conditions exist please disassemble the gazebo.
WARNINGS
1. Assembly Instructions must be followed.
2. Pegs supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
CUSTOMER SERVICE
Sunjoy Industries warrants to the original purchaser that this item is free from defects in
workmanship and materials of your item provided the item was factory-sealed at the time of
purchase and is maintained with care and used only for personal, residential purposes. The item
is warranted to be free from defects in material or workmanship for a period of 6 months. Should
any manufacturing defect arise within this warranty period, Sunjoy Industries will repair or
replace (at our option) any defective merchandise upon proof of purchase; however,
transportation and delivery costs, as well as labor and material charges to remove or replace
parts, remain the responsibility of the purchaser. A purchaser of an "open box,"
previously-returned, or "clearance" item, as well as original purchasers outside of the warranty
period, may obtain replacement parts from Sunjoy Industries for products in current production,
at nominal cost.
If you are within the return policy that most stores have, you do have the option of returning this
item back to the store which you bought it from for an exchange of the same item, or a refund of
the purchase.
If you are within or beyond the return policy that most stores have, and need tech. assistance or
replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:30 am to 5:30 pm
eastern standard time or e-mail to [e-mail] or visit www.sunjoydirect.com
to place your order or fax your parts replacement order form together with the purchase receipt
to 1 [phone] for assistance.