Sunjoy ROYALE DOME TOP User manual

DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.sunjoyonline.com
OR TOLL FREE AT:
8:00 AM EST to 8:00 PM PST
Production Number：2018xxxx
1-866-578-6569
SUNJOY GROUP INTERNATIONAL PTE LTD
619 Slack St reet
Steubenville, Ohio 43952 USA

ASSEMBLY INSTRUCTIONS
ITEM# L-GZ798PST-J
SKU# 197400
ROYALE 10’X12’DOME TOP GAZEBO

Description
CS NO.
Part NO.
QTY
Image
Corner Panel
P11172B01172
A
4
Long Cross Beam1
P11017D01172
B
2
Long Cross Beam2
P11018D01172
C
2
Short Cross Beam1
P11019D01172
D
2
Short Cross Beam2
P11020D01172
E
2
Upper Oblique Beam
P10328B01172
F
4
Middle Oblique Beam
P10329B01172
G
4
Bottom Oblique Beam
P10330B01172
H
4
Long Middle Beam
P10401B01172
I
2
Tube Under Long Middle Beam
P10402B01172
J
2
Short Middle Beam
P10403B01172
K
2
Tube Under Short Middle Beam
P10404B01172
L
2
Slant Beam For Small Roof
P10261A01172
M
4
Big Roof Connector
P10136B01172
N
1
Small Roof Connector
P10137B01172
O
1
Hook
P12601A01172
P
1
Corner Shelf
P11730A01172
Q
4
Big Canopy
P00126A07001
R
1
Parts List

Fig.1: Spread the Corner Panel (A) on the ground.
Fig.2: Insert Long & Short Cross Beam 1( B&D) into Long & Short Cross Beam 2(C&E), tighten with Knob(U).
Fig.3: Insert the assembled Cross Beam(B,C,D,E) into the Corner Panel (A).
Hardware Pack 1
Small Canopy
P00127A07001
S
1
Mosquito Netting
P00336B02902
T
1
Knob
P90804A07001
U
12
Finial
P10037A06172
V
1

Hardware Pack 2
Fig.4: Connect the Upper Oblique Beam (F) with the Middle Oblique Beam (G)．
Fig.5: Connect the Middle Oblique Beam (G) with the Bottom Oblique Beam (H).
Fig.6: Insert the assembled Upper Oblique Beam (F) into the corresponding tube of the Big Roof
Connector (N).
Fig.7: Insert the assembled Bottom Oblique Beam(H) into the Corner Panel(A).
Fig.8: Connect the Long Middle Beam (I) with the Tube under Long Middle Beam (J); Connect
the Short Middle Beam (K) with the Tube under Short Middle Beam (L).
Fig.9: Insert the assembled Long Middle Beam (I) into the Big Roof Connector (N), so does the Short
Middle Beam (K), then assemble the Hook (P) in the Big Roof Connector (N).
Fig.10: Assemble the Tube under Long & Short Middle Beam (J & L) on the Cross Beam with Knob (U).
Fig.11: Connect the Small Roof Slant Beam(M) with the Small Roof Connector (O), place the
Big Canopy (R) to the big roof and do not spread it.
Fig.12: Attach the Small Canopy (S) to the small roof along the Small Roof Slant Beam (M), Aligning
the corners and stretching it to fit.
Fig.13: Assemble the Finial (V) on the small roof.
Fig.14: Assemble the small roof on the big roof by the support bar of the Small Roof Slant Beam.

AA
Plastic Ring 52 PCS
BB
Φ6×230MM Stack 16 PCS
Hardware Pack 3
Fig.15: Spread the Big Canopy (R) to the roof along the Bottom Oblique Beam (H), aligning the
corners and stretching it to fit.
Fig.16: Place the Corner Shelf (Q) onto the Corner Panels (A) as desired.
Fig.17: Hang the Mosquito Netting (T) in the Cross Beams (B,C,D,E) by Plastic Rings (AA).
Fig.18: Secure the assembled gazebo to lawn with stakes(BB) through the bottom of the Corner Panels (A).
Made in China
P12402C01001
P90701A07007