Sunjoy Windsor L-GZ717PST-C User manual

Windsor 10'x12' Dome Gazebo Instruction Manual
Item #: L-GZ717PST-C
SKU #: 810213583

IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble.
WARNING:
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are
involved.
2. This product is intended for outdoor use only and should be placed on flat, horizontal
ground.
3. Ensure enough clearance around the product.
4. Do not use the unit during an electrical storm, as there is a remote chance of getting struck
by lightning.
5. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury,
possibly even death.
6. Never barbecue under this gazebo or use lanterns that contain naked flames.
7. This package contains small items and plastic bags that should be kept away from children.
8. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so
before use so as to avoid collapsing or damage to the item, which could result in injury.
9. WARNING: Keep all flame and heat sources away from this gazebo/canopy/tent fabric. This
gazebo/canopy/tent meets the flammability requirements of CPAI-84. The fabric may burn if
left in continuous contact with any flame source. The application of any foreign substance to
the gazebo/canopy/tent fabric may render the flame-resistant properties ineffective.
10. WARNING: Please take down the gazebo during strong wind. The manufacturer or retailer
is not liable for any loss of the product or other items due to the failure to take down the gazebo
during strong wind.
11. Hook maximum weight: 26 lbs.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the
product.

Post
GZ0717XXC01
A1
4
Long side left beam
GZ0717XXC02
B1
2
Long side right beam
GZ0717XXC03
B2
2
Short side left beam
GZ0717XXC04
C1
2
Short side right beam
GZ0717XXC05
C2
2
Cant beam
GZ0717XXC06
D1
4
Long middle beam
GZ0717XXC07
E4
2
Middle beam down tube
GZ0717XXC08
E3
4
Short middle beam
GZ0717XXC09
F3
2
Middle beam down
connector
GZ0717XXC10
G
4
Cant beam down tube
GZ0717XXC11
H1
4
Big top connector
GZ0717XXC12
I
1
Small top cant beam
GZ0717XXC13
J
4
Small top connector
GZ0717XXC14
K
1
Finial
GZHM8Y101
L
1
Hook
GZGM802001
M
1
Long mosquito netting pipe
GZ0717XXC15
N
4
Short mosquito netting pipe
GZ0717XXC16
O
4
Base cover
GZD8080S101
P
4
Base slice
GZD8080X101
Q
4
Small canopy
GZ0717XXC17
R
1
Big canopy
GZ0717XXC18
S
1
Mosquito netting
GZ0717XXC19
T
1
Curtain
GZ0717XXC20
U
1
Big top netting
GZ0717XXC21
V
1
Parts List

Hardware Pack 1
AA
M6*15 Screw
SM06015C
8 PCS
BB
M6 Flat washer
UD06C
40 PCS
CC
M5*15 Bolt
BM05015C
24 PCS
DD
M6*15 Bolt
BM06015C
24 PCS
EE
M6 Nut
LM06C
8 PCS
II
M5 Flat washer
UD05C
24 PCS
W
Wrench
W10D8D
2 PCS

Fig.1: Put base cover (P) into
post (A1), then attach base slice
(Q) to post (A1) by screw (AA)
and flat washer (BB).
Fig.2: Insert long side right beam
pipe into left beam, then attach
long side right beam (B2) to long
side left beam (B1) by bolt
(DD),flat washer (BB) and nut
(EE). Use the same way to
assemble short beam.
Fig.3: Attach beam to post (A1)
by bolt (DD) and flat washer
(BB).
Hardware Pack 2
BB
M6 Flat washer
UD06C
16 PCS
EE
M6 Nut
LM06C
8 PCS
FF
M6*40 Screw
SM06040C
8 PCS
Fig.4: Attach middle beam down
connector (G) to beam by bolt
(CC) and flat washer (II).
Fig.5: Attach long mosquito
netting pipe (N) to long side
beam, attach short mosquito
netting pipe (O) to short beam by
bolt (CC) and flat washer (II).

Fig.6-2: Insert hook (M) into big
top connector (I), then insert
long middle beam (E4) and
short middle beam (F3) into
pipe of big top connector (I).
Fig.7: Attach middle beam down
tube (E3) to middle beam down
connector (G) by screw (FF), flat
washer (BB) and nut (EE).
Fig.8: Insert cant beam (D1)
into cant beam down tube
(H1).
Fig.10: Attach cant beam down
tube (H1) to floor nail slice of post
(A1) by screw (FF),flat washer
(BB) and nut (EE).
Fig.9: Insert one side of cant
beam (D1) into pipe of big top
connector (I).
Fig.11: Insert small top cant
beam (J) into small top
connector (K).
Fig.12: Put small canopy (R)
on small top, then attach four
corners of small canopy to
small top cant beam (J).
Fig.13: Attach finial (L) to
small top connector (K).
Fig.6-1: Insert long middle beam
(E4) into middle beam down tube
(E3). Insert F3 into E3.

Fig.14: Put the big canopy (S) onto
big top, do not spread, insert small
top cant beam (J) into the pipe of
cant beam (D1) to fix the
assembled small top.
Hardware Pack 3
GG
Plastic ring
R40V
104 PCS
HH
￠6X230 Stake
QD06230C
16 PCS

USE & CARE
1. This Gazebo is not a permanent structure and should be disassembled & stored away after
use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must be assembled by two adults or more.
4. This Gazebo must not be left erect in windy conditions.
WARNINGS
1. Assembly Instructions must be followed.
2. Pegs supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
Fig.15: Spread out big canopy (S),
attach four corners to cant beam
down tube (H1), then stick the tippet
hook-and-loop fasteners.
Fig.17: Put mosquito netting (T)
and curtain (U) onto long
mosquito netting pipe (N) and
short mosquito netting pipe (O)
by plastic ring (GG).
Fig.18: Put up base cover
(P), secure the whole
gazebo to the lawn by stake
(HH).
Fig.16: Attach big top netting (V)
to the big canopy (S) by sticking
the hook-and-loop fasteners.

CUSTOMER SERVICE
Sunjoy Group warrants to the original purchaser that this item is free from defects in
workmanship and materials of your item provided the item was factory-sealed at the time of
purchase and is maintained with care and used only for personal, residential purposes. The
item is warranted to be free from defects in material or workmanship for a period of 1 year.
Should any manufacturing defect arise within this warranty period, Sunjoy Group will repair or
replace (at our option) any defective merchandise upon proof of purchase; however,
transportation and delivery costs, as well as labor and material charges to remove or replace
parts, remain the responsibility of the purchaser. A purchaser of an "open box,"
previously-returned, or "clearance" item, as well as original purchasers outside of the warranty
period, may obtain replacement parts from Sunjoy Group for products in current production, at
nominal cost.
If you are within the return policy that most stores have, you do have the option of returning
this item back to the store which you bought it from for an exchange of the same item, or a
refund of the purchase.
If you are within or beyond the return policy that most stores have, and need tech. assistance
or replacement parts, please call Sunjoy Group at 1(866) 578-6569 from 8:00 am to 8:00 pm
eastern standard time or e-mail to [email protected] or fax your parts replacement
order form together with the purchase receipt to 1 [phone] for assistance.