Sunny Health & Fitness SF-BH6629 User manual

45 DEGREE HYPEREXTENSION
ROMAN CHAIR
SF-BH6629
USER MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain
owner’s manual for future reference. For customer service, please contact:
[email protected]

IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using
the equipment. Safe and effective use can only be assured if the equipment is assembled,
maintained, and used properly. It is your responsibility to ensure that all users of the
equipment are informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to
determine if you have any medical or physical conditions that could put your
health and safety at risk or prevent you from using the equipment properly. Your
physician’s advice is essential if you are taking any medication that may affect
your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage
your health. Stop exercising if you experience any of the following symptoms:
pain, tightness in your chest, irregular heartbeat, shortness of breath,
lightheadedness, dizziness, or feelings of nausea. If you do experience any of
these conditions, you should consult your physician before continuing with your
exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for
adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your
floor or carpet. To ensure safety, the equipment should have at least 4 feet of free
space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment.
The safety of the equipment can only be maintained if it is regularly examined for
damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components
while assembling or checking the equipment, or if you hear any unusual noises
coming from the equipment during exercise, stop using the equipment
immediately and don’t use the equipment until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing
that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 250 pounds.
10.This equipment is not suitable for therapeutic use.
11.Move with caution when lifting and moving the equipment. Always use proper
lifting technique and seek assistance if necessary.
12.Your product is intended for use in cool, dry conditions. Avoid storage in extreme
cold, hot, or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor use only! It is not intended for commercial
use!
2

EXPLODED DRAWING
1
F
D
4
G
E
3
A
2
E
G
I
E
H
B
C
7
B
E
E
9
B
5
C
6
E
E
C
G
C
10
C
C
8
11

PARTS LIST
1.
2.
3.
Cushion
Adjustable Tube
Right Handle Bar
4.
5.
6.
Left Handle Bar
Back Stand Tube
Back Base Tube
7.
8.
9.
Front Base Tube
Leg Support Tube
Front Stand Adjustable Tube
10.
C.
11.
12.
A.
B.
Support Plate
Foam Tube
Foam
Hex Bolt M10x65 2pcs
Hex Bolt M10x70 3pcs
D.
E.
F.
G.
H.
I.
Hex Bolt M10x15 6pcs
Hex Bolt M8x15 4pcs
Washer M10 16pcs Washer M8 4pcs
Nut M10 5pcs
Lock pin 1pc
Lock pin 1pc
SPANNER WRENCH 2PCS

ASSEMBLY INSTRUCTIONS
STEP 1:
Fix the Cushion (1) to the Adjustable Tube (2), using Hex Bolts (D) and Washers
(F). Then attach Right Handlebar (3) and Left Handlebar (4) to Adjustable Tube
(2), using Hex Bolts (A), Washers (E) and Nuts (G).
STEP 2:
Insert Back Stand Tube (5) into Back Base Tube (6). Secure using Hex Bolts (C)
and Washers (E).

STEP 3:
Insert Front Stand Adjustable Tube (7) into Front Base Tube (8) Secure using
Hex Bolts (C) and Washers (E).
STEP 4:
Insert Foam Tube (10) through the hole of the Leg Support Tube (9). Then put
Foam (11) on the ends of the Foam Tube (10).

B
E
STEP 5:
Attach Back Stand Tube (5) to Front Stand Adjustable Tube (7), using Hex Bolt
(B), Washer (E), and Nut (G).
Insert Lock Pin (H).
Place bench on floor, making sure the Tubes are level on the floor. Tighten all the
Hex Bolts and Nuts.
Insert Adjustable Tube (2) into Front Stand Adjustable Tube (7). Insert Lock Pin
(I) and turn to tighten.
Attach Leg Support Tube (9) to Front Stand Adjustable Tube (7), using Hex Bolt
(B), Washer (E), Support Plate (12), and Nuts (G).

Assembly is now complete.
To adjust the cushion height:
With one hand, turn Lock Pin (I) to loosen and pull on it. With the other hand, move
the adjustable tube to desired height. Insert Lock Pin (I) into one of the five settings
to secure and turn to tighten.
To fold the bench:
Pull out Lock Pin (H). Fold the bench. Insert Lock Pin (H). When folded, bench will
not stand on its own. It has to lean against wall.

MAINTENANCE
IMPORTANT:
Safe and effective use can only be achieved if the equipment is assembled,
maintained and used properly. It is your responsibility to ensure that the equipment is
maintained regularly. Any components found to be worn and/or damaged should be
replaced before continuing use of the equipment. Equipment should only be used
and stored indoors, prolonged exposure to weathering and changes in temperature
and humidity may have a severe impact on electrical components and moving parts
of the machine.
Daily Maintenance:
Clean and remove sweat and moisture after each use.
Perform inspection of all nuts and bolts associated with moving parts of the
equipment, tighten as required.
Check the mobility of moving parts and components on the equipment, lubricate if
required.
Clean plastic parts of the equipment using a damp cloth, clean metal parts of the
equipment using a dry cloth. Do not use cleaning products to clean the equipment.
Weekly Maintenance:
Thoroughly inspect the parts of the equipment; nuts, bolts, Hex Bolts and moving
parts such as the slide collar, seat/back pad, support bar, etc. Tighten or replace
parts as required.
Monthly Maintenance:
Inspect the frame and inner working components for wear and tear as well as
damage, maintenance or replace as required.
12