Sunny Health & Fitness SF-BH621002 User manual

STRETCH TRAINING MACHINE
SF-BH621002
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: [email protected] or 1- 877 - 90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe
and effective use can only be achieved if the equipment is assembled, maintained, and used
properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings
and precautions.
1. Before starting any exercise program, you should consult your physician to determine if you have
any medical or physical conditions that could put your health and safety at risk or prevent you
from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you
do experience any of these conditions, you should consult your physician before continuing with
your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 265 pounds (120KG).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
EXPLODED DIAGRAM
1
2
3
4
5
7
9
8
10
11
11 11
13
13
12
12
15L
16 16
14
17
19
18
20
20
22
22
23 23
23
23
23
24
24
24
23
23
23 25
25
23
25 25
23
23
24 24
25
25
26
23
26
23 23
25
12
25
25
23
23
23 26
26
26 23
23
23
27
27
27
28
28
29
29
6
15R
21
10
32
32
#30 1PC
#31 1PC
22
23
23
23
23
24
24
#22-M8*48mm 2PCS
#24-M8 2PCS
#23-∮16*∮8.5*1.5mm 4PCS #31-6mm 1PC
#30-#13-17 1PC
3
2
22
HARDWARE PACKAGE
#22-M8*48mm 4PCS
#24-M8 11PCS
#23-∮16*∮8.5*1.5mm 32PCS
#31-6mm 1PC
#30-#13-17 1PC
#25-M8*45mm 14PCS
#26-M8 9PCS
#27-M8*15mm 3PCS

3
PARTS LIST
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Main Frame
1
17
Foam Grip
∮23*t3.0*460mm
2
2
Front Support
Frame
1
18
Seat
1
3
Front Stabilizer
Tube
1
19
Cushion
1
4
Rear Stabilizer
Tube
1
20
Strap
2
5
Cushion
Support Frame
1
21
Instructional
Diagram
1
6
Rotating Shaft
1
22
Hex Socket Head
Bolt
M8*48mm
4
7
Seat Support
Frame
1
23
Flat Washer
∮16*∮8.5*1.5mm
32
8
Foam Rod
1
24
Nylon Nut
M8
11
9
Handlebar
1
25
Hex Socket Head
Bolt
M8*45mm
14
10
End Cap
∮38
2
26
Spring Washer
M8
9
11
Round End
Cap
∮25*1.5
4
27
Hex Socket Head
Bolt
M8*15mm
3
12
Square End
Cap
60*30*1.5
3
28
Big Washer
∮25*∮15*3.0mm
2
13
Square End
Cap
30*30*1.5
4
29
Alloy Wrap
∮32*∮26*∮
22*10
2
14
Rubber Pad
1
30
Wrench
#13-17
1
15L
Left Foot Pedal
1
31
Allen Wrench
6mm
1
15R
Right Foot
Pedal
1
32
Adjustable End
Cap
∮38mm
2
16
Sponge
∮85*∮65*∮
23*150mm
2
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓The model number (found on cover of manual)
✓The product name (found on cover of manual)
✓The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front
of the manual)
Please contact us at [email protected] or 1- 877 - 90SUNNY (877-907-8669).

4
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
#22-M8*48mm 2PCS
#24-M8 2PCS
#23-∮16*∮8.5*1.5mm 4PCS #31-6mm 1PC
#30-#13-17 1PC
10
22
23
23
23
23
24
24 23
23 23
23
24
24
22
3
21
4
22
#22-M8*48mm 2PCS
#24-M8 2PCS
#23-∮16*∮8.5*1.5mm 4PCS #31-6mm 1PC
#30-#13-17 1PC
23
23 23
23
24
24
22
1
424
23
23 25
23
23 22
23
25 25
24
25
2
1
STEP 1:
Attach the Front Stabilizer Tube (No. 3)
to the Front Support Frame (No. 2)
using 2 Hex Socket Head Bolts (No. 22),
4 Flat Washers (No. 23) and 2 Nylon
Nuts (No. 24). Tighten and secure with 1
Wrench (No. 30) and 1 Allen Wrench
(No. 31).
STEP 2:
Attach the Rear Stabilizer Tube (No. 4)
to the Main Frame (No. 1) using 2 Hex
Socket Head Bolts (No. 22), 4 Flat
Washers (No. 23) and 2 Nylon Nuts (No.
24). Tighten and secure with 1 Wrench
(No. 30) and 1 Allen Wrench (No. 31).

5
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
#25-M8*45mm 4PCS
#24-M8 3PCS
#23-∮16*∮8.5*1.5mm 7PCS #31-6mm 1PC
#30-#13-17 1PC
24
23
23 25
23
23 23
23
25 25
24
25
2
1
5
#25-M8*45mm 4PCS
#24-M8 4PCS
#23-∮16*∮8.5*1.5mm 8PCS #31-6mm 1PC
#30-#13-17 1PC
23
24
23
23
25
25
7
5
23
23
23
23 26 26
26
25 25
25
5
19
STEP 3:
Lift Cushion Support Frame (No. 5)
away from the Main Frame (No. 1).
Attach the Main Frame (No. 1) to the
Front Support Frame (No. 2) using 4
Hex Socket Head Bolts (No. 25), 7 Flat
Washers (No. 23) and 3 Nylon Nuts (No.
24). Tighten and secure with 1 Wrench
(No. 30) and 1 Allen Wrench (No. 31).
STEP 4:
Attach the Seat Support Frame (No. 7)
to the Cushion Support Frame (No. 5)
using 4 Hex Socket Head Bolts (No. 25),
8 Flat Washers (No. 23) and 4 Nylon
Nuts (No. 24). Tighten and secure with 1
Wrench (No. 30) and 1 Allen Wrench
(No. 31).

6
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
19
#25-M8*45mm 4PCS
#26-M8 4PCS
#23-∮16*∮8.5*1.5mm 4PCS
#31-6mm 1PC #25-M8*45mm 2PCS
#26-M8 2PCS
#23-∮16*∮8.5*1.5mm 2PCS
#31-6mm 1PC
23
23
23
23 26 26
26
25 25
25
5
19
25
26
23
25
26
23 7
#25-M8*45mm 2PCS
#26-M8 2PCS
#23-∮16*∮8.5*1.5mm 2PCS
#31-6mm 1PC
26
25
25
26
23
25
26
23 7
18 26 23
27
STEP 5:
Attach the Cushion (No. 19) to the
Cushion Support Frame (No. 5) using 4
Hex Socket Head Bolts (No. 25), 4
Spring Washers (No. 26) and 4 Flat
Washers (No. 23). Tighten and secure
with Allen Wrench (No. 31).
STEP 6:
Attach the Seat (No. 18) to the Seat
Support Frame (No. 7) using 2 Hex
Socket Head Bolts (No. 25), 2 Spring
Washers (No. 26) and 2 Flat Washers
(No. 23). Tighten and secure with Allen
Wrench (No. 31).

7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
9
#27-M8*15mm 3PCS
#26-M8 3PCS
#23-∮16*∮8.5*1.5mm 3PCS
#31-6mm 1PC
26 26
26
23 23
27
27
27
2
9
2
16 16
8
26
26
23
27
27
2
2
16 16
8
16
8
#23-
9
20
STEP 7:
Attach the Handlebar (No. 9) to the Front
Support Frame (No. 2) using 3 Hex
Socket Head Bolts (No. 27), 3 Spring
Washers (No. 26) and 3 Flat Washers
(No. 23). Tighten and secure with Allen
Wrench (No. 31).
STEP 8:
Insert the Foam Rod (No. 8) into the hole
of the Front Support Frame (No. 2).
Attach 2 Sponges (No. 16) onto the two
ends of the Foam Rod (No. 8).
Attach 2 Straps (No. 20) onto the two
sides of the Handlebar (No. 9).
The assembly is complete!

8
MAINTENANCE INSTRUCTIONS
DAILY MAINTENANCE
Inspect and tighten all parts regularly. (Nuts, Bolts, Rubber Pads, Steel Brackets, etc.)
Replace any worn or torn parts immediately.
Check and ensure the equipment is leveled at all time.
Check and tighten all adjustment pins/knobs regularly.
WEEKLY MAINTENANCE
Use damp cloth on plastic parts only, use dry cloth on metal frames.
Inspect the metal frame structure of the equipment.
Version：1.0

9