Sunny Health & Fitness SF-BH620062 User manual

HYPEREXTENSION ROMAN CHAIR
WITH DIP STATION
SF-BH620062
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us,PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: [e-mail] or 1- 877 - 90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing ourproduct.To ensure your safetyand health,please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe
and effective use can only be achieved if the equipment is assembled, maintained, and used
properly. It is your responsibility to ensure that all users of the equipment are informed ofall warnings
and precautions.
1. Before starting any exercise program,you should consult your physician to determine if you have
any medical or physical conditions that could put your health and safety at risk or prevent you
from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you
do experience any of these conditions, you should consult your physician before continuing with
your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wearsuitable clothing while usingthe equipment.Avoid wearing loose clothing that maybecome
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 330 pounds (150KG).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
EXPLODED DIAGRAM
28
1
22
3
3
4
4
5
6
7
8
99
10 11 12
11
12
13
15
16L 14
14
15
17
17 17
18
19
20
20
20
20
20
20 20
21
21
22
22
22
23
23
24
25
25
27
26
26
27 29
30
29
32 31
33
34
35L
16R
35R 36
37
37
37
37
38
38
39 39
37
37
40
20
20
39
39
38
38 38
38
HARDWARE PACKAGE
#18-M8*58 1PCS
#17-M8*30 8PCS #37-M8*20 10PCS
#20-∮16*∮8.5*1.5mm 13PCS #39-M8 8PCS
#22-M8 3PCS
#38-M8 10PCS #40--#13-17 1PC
#28-6mm 1PC
#36-M8*65 2PCS

3
PARTS LIST
No. Description Spec. Qty. No. Description Spec. Qty.
1 Base Frame 1 21 Flat Washer ∮20*∮10.5*2.0 2
2Adjustable
Leveler ∮50*15.6/M10*25 222 Nylon Nut M8 5
3Oval End Cap 2 23 Nylon Nut M10 2
4End Cap ∮50mm 2 24 Square End
Cap 45*45*2.0 1
5Front Support
Tube 1 25 Square End
Cap 25.4*12.7*1.5 4
6Square
Bushing 50*50*1.5/45*45*1.5m m 1 26 Alloy Wrap ∮20*∮10.5*15.5 2
7Round Knob M16*20/∮8 1 27 Transportation
Wheel
∮35*∮8*19 2
8Rear Support
Tube 128 Allen Wrench 6mm 1
9Buffer Grip ∮19*69mm 229 Hex Socket
Head Bolt M8*35 2
10 Front Post 130 Square End
Cap
50*50*2.0 1
11 Sponge ∮100*∮23*200 231 Square End
Cap 40*20*1.5 1
12 End Cap ∮65*22.2 232 Hex Bolt M10*72 1
13 Adjustable
Rack 133 Front Stabilizer 1
14 Foam Grip ∮23*∮26*220 234 Rear Stabilizer 1
15 Round End
Cap ∮25*3.0 235L Left Handlebar 1
16L Support Pad
with Logo 200*190*(50+60)mm 1 35R Right Handlebar 1
16R Support Pad 200*190*(50+60)mm 1 36 Hex Socket
Head Bolt M8*65 2
17 Hex Socket
Head Bolt M8*30 8 37 Hex Socket
Head Bolt M8*20 10
18 Hex Socket
Head Bolt M8*58 1 38 Spring Washer M8 10
19 Hex Bolt M10*75 1 39 Curved Washer M8 8
20 Flat Washer ∮16*∮8.5*1.5 15 40 Wrench #13-17 1
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
The model number (found on cover of manual)
The product name (found on cover of manual)
The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front
of the manual)
Please contact us at [e-mail] or 1- 877 - 90SUNNY (877-907-8669).

4
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY (877-
907-8669).
#37-M8*20 10PCS
#20- ∮ 16* ∮
8.5*1.5mm 2PCS
#38-M8 10PCS
#39-M8 8PCS #28-6mm 1PC
1
34
33
37
38
39
20
37
38
20
38
37
37 38 39
37
38 39
37
38
39
5
5
8
1
1
STEP 2:
Lift Front Support Tube (No. 5) away
from the Base Frame (No. 1). And move
the Rear Support Tube (No. 8) to the first
stopper.
STEP 1:
Attach the Front Stabilizer (No. 33) to
the Base Frame (No. 1) using 5 Hex
Socket Head Bolts (No. 37), 5 Spring
Washers (No. 38), 4 Curved Washers
(No. 39), 1 Flat Washer (No. 20). Tighten
and secure with Allen Wrench (No. 28).
Attach the Rear Stabilizer (No. 34) to the
Base Frame (No. 1) using 5 Hex Socket
Head Bolts (No. 37), 5 Spring Washers
(No. 38), 4 Curved Washers (No. 39), 1
Flat Washer (No. 20).
Tighten and
secure with Allen Wrench (No. 28).

5
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY (877-
907-8669).
#18-M8*58 1PCS
#20-
∮ 16*
∮
8.5*1.5mm 1PCS
#22-M8 1PC #28-6mm 1PC
#40--#13-17 1PC
10
11
12 12
11
5
18
20 22
#36-M8*65 2PCS
#20-
∮ 16* ∮
8.5*1.5mm 2PCS
#22-M8 2PCS #28-6mm 1PC
#40--#13-17 1PC
20
22
36
35L 35R
13
5
7
STEP 4:
Attach 2 Right & Left Handlebars (No.
35R & 35L)to the Adjustable Rack (No.
13) using 2 Hex Socket Head Bolts (No.
36),2 Flat Washers (No. 20) and 2
Nylon Nuts (No. 22). Tighten and secure
with 1 Allen Wrench (No. 28)
and 1
Wrench (No. 40).
Loosen and pull out the Round Knob
(No. 7), slide the Adjustable Rack (No.
13) to the Front Support Tube (No. 5).
STEP 3:
Attach Front Post (No. 10) to the Front
Support Tube (No. 5) using 1 Hex
Socket Head Bolt (No. 18), 1 Flat
Washer (No. 20) and 1 Nylon Nut (No.
22). Tighten and secure with 1 Allen
Wrench (No. 28) and 1 Wrench (No. 40).
Attach 2 Sponges (No. 11) onto the two
ends of the Front Post (No. 10). And
firmly press the End Caps (No. 12) into
the ends of Front Post (No. 10).

6
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY (877-
907-8669).
#17-M8*30 8PCS
#20-
∮ 16*
∮
8.5*1.5mm 8PCS #28-6mm 1PC
20 20
20
17 17 17
13
16L
16R
#7-M16*20/ ∮
8 1PC
7
5
13
STEP 6:
Loosen and pull out the Round Knob
(No. 7), then slide the Adjustable Rack
(No. 13) to desire height. Re-insert and
tighten the Round Knob (No. 7).
CAUTION!
To avoid any injury, please make sure that
the Round Knob (No. 7)
is properly
engaged and the Adjustable Rack (No.
13) is secured tightly with the Round
Knob (No. 7).
The assembly is complete!
STEP 5:
Attach 2 Support Pads (No. 16R & 16L
WITH LOGO)to the
Adjustable Rack
(No. 13) using 8 Hex Socket Head Bolts
(No. 17) and 8 Flat Washers (No. 20).
Tighten and secure with Allen Wrench
(No. 28).
NOTE: Make sure the
Support Pads
(No. 16) are assembled with SUNNYlogo
facing up, as showed on Fig.A.
Fig. A

7
ADJUSTMENTS & USAGE GUIDE
12
34
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable usage,
you must ensure that the roman chair is stabled and
secured.If you notice thatthe roman chair isunbalanced
during use, you should adjust the Adjustable Levelers
(No. 2) located on the Base Frame (No. 1). Rotate the
Adjustable Levelers (No. 2) clockwise
to raise the
roman chair and counter-clockwise to lower the roman
chair.
13
8
1
ADJUSTING THE ANGLE
The roman chair has 3 different angle settings.
T
o adjust the angle of the roman chair, slightly lift the
Adjustable Rack (No. 13) so that the
Rear Support
Tube (No. 8) can be moved freely.
Bring the Rear Support Tube (No. 8)
to the desired
position on the Base Frame (No. 1)
and lower the
Adjustable Rack (No. 13) back down.
13
7
ADJUSTING THE HEIGHT
To adjust the height, loosen and pull out Round Knob
(No. 7), slide the Adjustable Rack (No. 13) tothe desire
height, re-insert and tighten the Round Knob (No. 7).
CAUTION!
To avoid any injury, please make sure that the Round
Knob (No. 7) is properly engaged and the Adjustable
Rack (No. 13) is secured tightly with the Round Knob
(No. 7). Once the Round Knob (No. 7) is tightened, the
height can’t be adjusted.
27
34
33
13
15
MOVING THE ROMAN CHAIR
B
efore moving, please make sure the roman chair is
folded.
To move the roman chair, one hand lift the end of the
Rear Stabilizer (No. 34) until the Transportation
Wheels (No. 27) on the Front Stabilizer (No. 33)touch
the ground, the other hand hold the Handlebars (No.
15) to avoid the Adjustable Rack (No. 13) unfolding
during transporting. With the
Transportation Wheels
(No. 27)
on the ground, you can transport the roman
chair to the desired location with ease.

8
FOLDING THE ROMAN CHAIR
The roman chair is foldable. When not in use, you can save space by folding the roman chair.
10 13
8
5
8
10
5
1
13
First pull the Front Post (No. 10) up to the
Front Support Tube (No. 5), then lift the
Adjustable Rack (No. 13) so that the Rear
Support Tube (No. 8) can bemovedfreely.
Move the Rear Support Tube (No. 8)
close to the Front Support Tube (No. 5).
Lower the
Adjustable Rack (No. 13)
completely onto the Base Frame (No. 1).
Fold the Front Post (No. 10) down onto
the Base Frame (No. 1).
The folding is complete now!

9
MAINTENANCE INSTRUCTIONS
DAILY MAINTENANCE
Inspect and tighten all parts regularly. (Nuts, Bolts, Rubber Pads, Steel Brackets, etc.)
Replace any worn or torn parts immediately.
Check and ensure the equipment is leveled at all time.
Check and tighten all adjustment pins/knobs regularly.
WEEKLY MAINTENANCE
Use damp cloth on plastic parts only, use dry cloth on metal frames.
Inspect the metal frame structure of the equipment.
Version：2.1