Sunny Health & Fitness SF-XFA009 User manual

BELT SQUAT ATTACHMENT FOR
POWER RACKS AND CAGES
SF-XFA009
USER MANUAL
1
2
3
4
5
6
7
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: [email protected] or 1-877-90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe
and effective use can only be achieved if the equipment is assembled, maintained, and used
properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings
and precautions.
1. Before starting any exercise program, you should consult your physician to determine if you have
any medical or physical conditions that could put your health and safety at risk or prevent you
from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you
do experience any of these conditions, you should consult your physician before continuing with
your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 ft (60 cm) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 125lbs (55kgs).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY (877-
907-8669).
2
#8-#17-19 1PC
#4-M12*75mm 1PC
#6-∮37*∮12.5*2.0mm 1PC
#5-M12 1PC
2
3
7
8
1
2
4
5
6
#17-19 1PC
#6-∮37*∮12.5*2.0mm 1PC
#5-M12 1PC
STEP 1:
Remove 1 Hex Bolt (No. 4), 1 Spring
Washer (No. 5) and 1 Flat Washer (No.
6) from Weight Plate Holder (No. 2).
Attach the Weight Plate Holder (No. 2)
to the Main Frame (No. 1) using 1 Hex
Bolt (No. 4), 1 Spring Washer (No. 5)
and 1 Flat Washer (No. 6) that were
removed. Tighten and secure with
Wrench (No. 8).
The assembly is complete!

3
USAGE GUIDE
A
B
C
Insert the attachment into the Upright
Frame. Turn as arrow showed to tighten.
There are 3 ways to use this attachment.
See pictures as below.
A: With handle.
B: With lat pull down bar.
C: With weight lifting belt.

4
EXPLODED DIAGRAM
1
2
3
4
5
6
7
8
1
4
5
6
#6-∮37*∮12.5*2.0mm 1PC
#5-M12 1PC
PARTS LIST
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Main Frame
1
5
Spring Washer
M12
1
2
Weight Plate Holder
1
6
Flat Washer
∮37*∮12.5*2.0
1
3
Round End Cap
∮48*1.5
1
7
Hook
1
4
Hex Bolt
M12*75mm
1
8
Wrench
#17-19
1
Version 1.0

5