SunSetter EASYSHADE Use and care manual

For Technical Support visit us at www.sunseer.com/ownerscorner
or Call Toll Free 800-670-7071 • Fax [phone]
©SunSeer Products, a Massachuses Limited Partnership, 184 Charles Street, Malden, MA 02148
EASYSHADE®
Motorized EasyShade
End Plate w/Pin Replacement
* Helper Needed *
Tools Needed:
Parts Supplied:
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY!
PLEASE READ THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING TO COMPLETE
THIS PROCEDURE.





.


.

.





Note: Before performing Step 7, take a
moment to observe the orientaon of the
Housing end plate.





SunSeer Products, a Massachuses Limited Partnership, 184 Charles Street, Malden, MA 02148
 






.









































NOTE: DO NOT OVER TIGHTEN THE CABLE.










SunSeer Products, a Massachuses Limited Partnership, 184 Charles Street, Malden, MA 02148
02/17/12 ES_M_APP-A
To Change the Close Limit:
Move the EasyShade to its current Close limit posion and let it stop. Press the
(UP) and (DOWN) buons simultaneously unl the EasyShade jogs, then
release. Adjust to a new Close limit posion. Press the (MY) buon unl the
EasyShade jogs, then release. Check the new Close limit.
To Change the Open Limit:
Move the EasyShade to its current Open limit posion and let it stop. Press the
(UP) and (DOWN) buons simultaneously unl the EasyShade jogs, then
release. Adjust to a new Open limit posion. Press the (MY) buon unl the
EasyShade jogs, then release. Check the new Open limit.
my
my
my
APPENDIX A
Adjusng the Open and Close Limits
of the EasyShade Motor
Follow these instrucons if you wish to change your current Open or Close Limits.
NOTE: Do Not exceed the 84” Open Limit as this will cause the screen to roll up
backwards in the housing.
my