SunSetter EASYSHADE Use and care manual

RETRACTABLE AWNINGS
For Technical Support visit us at www.sunseer.com/ownerscorner
or Call Toll Free 800-670-7071 • Fax [phone]
©SunSeer Products, a Massachuses Limited Partnership, 184 Charles Street, Malden, MA 02148
Motorized EasyShade
End Plate (Motor Side) Replacement
* Helper Needed *
Tools Needed:
Parts Supplied:
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY! PLEASE READ
THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING TO COMPLETE THIS PROCEDURE.




Figure 1.

Figure 3.




Figure 4





area.


Figure 2.
Note: Before performing Step 7, take a moment to
observe the orientaon of the Housing End Plate.









See Figure 5.





2
Note: Before performing Step 8, take a moment to
observe the orientaon of the Housing End Plate.
See Figure 6.
remove the two
Phillips head screws
Figure 6.

 Allen head screw
Allen head screw

Allen head screw

ghten both Allen head screws.









Figure 7.



 Figure 6


















Figure 8.



See Figure 9
Figure 10



 















Note: Do not overghten the Cable.



Note: Do Not exceed the 84” Open Limit as this will cause the screen to roll up backwards in the housing.
To Change the Up Limit:


Figure 11



To Change the Down Limit:


Figure 10






SunSeer Products, a Massachuses Limited Partnership, 184 Charles Street, Malden, MA 02148
10/29/2015 
A place for your notes: