LED Canopy Light
Important: Read all instructions prior to installation. FLD-CNL-60005-150W
Summary
This LED canopy light is great for parking garage lighting, gas station
lighting, drive-thru lighting, tunnel lighting, train stations, and covered
walkways. Using 90 LEDs (3 groups of 30), the canopy light emits
17,000 lumens of powerful natural white illumination in a square
conguration. The 150-watt LED light is a replacement for traditional
320-watt metal-halide. A die cast aluminum housing with white powder
coating and an impact-resistant PMMA lens with UV inhibitors protect
internal components and LEDs. The durable xture can be easily surface
mounted with its removable bracket or ush mounted with an optional
frame, FLD-FM2 (sold separately).
WARNING:
• This product should be installed by a fully certied electrician in
accordance with local building and electrical codes.
• Due to risk of electric shock, ensure that the main power
source and circuit breakers are switched o before performing
any installation or wiring procedures.
• Do not install insulation within 2”(51mm) of any part of the
panel light xture.
• Ensure the junction box is securely mounted and will support
the weight of the xture. Failure to properly support the xture
during installation may cause damage or injury, for which the
manufacturer is not responsible.
ASSEMBLY
1. Loosen Mounting Bracket Screws and Remove Mounting
Bracket from Canopy Light before proceeding.
2. Pull supply wires through Mounting Bracket. Attach the
mounting bracket to the junction box using Jbox provided
screws.
3. Make all power connections. Connect black to black (Line),
white to white (Neutral), and green to green (Ground).
4. Push connected wires through center hole of Mounting
Bracket.
5. Align the light with the Mounting Bracket as shown
in Figure 1 and lift the light, insuring Step Bracket ts into the
Mounting Bracket. Make sure it is ush to the top of Canopy
Light. Tighten the 4 Mounting Bracket screws until snug. Screws
must go under the rst level of the step bracket as shown in
Figure 1.
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Specications
Installation
Input Voltage 100~277 VAC
Total Power 150 Watts
Lumens 17000 lm
Color Temperature 5000K
CRI 75
Ecacy 113 lm/w
Temperature Range -40° ~ 140° F (-40° ~ 60°C)
Dimensions L15” x W13.94” x H5.24” (38 x 35.4 x 13.3cm)
Weight 19 lbs 8oz (8.85kg)
Warranty 5 years
Included Parts
Canopy Light (FLD-CNL-60005-150W)
1 - LED Canopy Light
1 - Mounting Bracket
4 - Mounting Bracket screws
User Manual
Part Number:
Jbox
Ceiling
Mounting Bracket
Mounting Bracket
Screws
Junction Box
Screws
Additional
Mounting Holes
Step Bracket (Mounting
Screw Contact Point)
Canopy Light
Figure 1.
