TAKT Arc Chair T12 Instruction Manual

T12 Arc Chair
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for strong
force.
2x sides

4x plast gliders
4x felt gliders
1x Allen key (SW3)
1x Allen key (SW2)
1x seat
1x backrest
Flat-head screwdriver
(not provided)
4x screws (25mm)
4x pinol screws (6mm)
1x screw (18mm)
A
B
C
D
E

Product Information
‘T12 Arc Chair’ is a chair designed
for indoor use.
The chair is tested according to
EN-16139 - L1.
Materials
Seat and back: Moulded plywood
Water based lacquer
Frame: Powder coated steel tubes
Fittings: Plastic & steel
Upholstered version
Upholstered seat: Ecolabelled leather or textile,
plywood.
Foam: OekoTex class 1 certified
UK version: Foam contains flame retardants melamine
and TCPP and has been tested according to “BS5852
part 2 ignition source 5 crib”.
OekoTex class 2 certified
Tests & Declarations
The chair has passed the furniture test EN-16139 - L1
The chair is not treated with or containing disinfective
biocides.
Weight
5,2 kg

569 mm
453 mm
735 mm
482 mm
Dimensions

6x1

7
Place seat on frame - fit metal dowels in holes

Important!
Turn all screws in sequence 1 to 4 - ONLY two rounds.
Make sure the screw easily grips the thread.
8x4
x2
1
2
3
4

Important!
Fit top rail on frame - ONLY
tighten pinol screws loosely.
1
2
C
Cx4 9

Push down on seat and tighten screws
Push down on top rail and tighten pinol screws
10
2
2
1
1

DE
D E
x4 or x4 11
The chair must be fitted with either felt gliders for hard surfaces
or plast glides for soft surfaces such as soft floors (carpets, etc.)
or

12 You can later exchange the glider by placing screwdriver
in groove and push down

13
Enjoy your new chair

Warranty
TAKT provides an ex-
tended warranty of 5
years on ‘T12 Arc Chair’.
The warranty covers
breakage of components
and damage occurred
because of deficient
craftsmanship under
normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
gliders, wheels, surfaces
and the like.
Maintenance
TAKT maintenance
guide is accessible on
our website
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T12 Arc Chair’.
Spare Parts
TAKT offers spare parts
for ‘T12 Arc Chair’. Spare
parts are available from
TAKT without charge for
a period of 5 years from
the date of purchase if
the parts are found to
be faulty during normal
use. If the parts are
damaged by misuse
spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to
you in the fastest and
most efficient way in
order for your furniture
to return to a functional
condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling & Disassembly
We hope that your TAKT
product will serve you well
for many, many years.
If you at one point want to
recycle it, please separate
it into components for
sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts, wooden parts
and plastic parts can be
delivered to a suitable
recycling facility and be
recycled.
Mixed material parts can
be delivered to a recycling
facility for suitable
disposal.
[email protected]

4x plast gliders or 4x felt gliders (plast)
1x screw 18mm (metal)
1x wooden seat
(wood) or
upholstered seat
(mixed material)
2x base components
(metal)
4x pinol screws (metal)
4x screws 25mm
(metal)
1x backrest (wood)
4x dowels
(metal)

taktcph.com