TAKT T22 Instruction Manual

T22 Turn Chair
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for
strong force.
2x legs
1x seat

1x back frame
1x Allen key (SW4)
A
B
C
D
8x screws (25mm)
2x wood dowels
4x felt gliders
4x stacking spacers

Weight
3,6 kg
3,8 kg with upholstery
Product Information
‘T22 Turn Chair ’
is a chair designed for
indoor use. The chair is
tested according
to EN 16139 - L1.
Materials
Back frame: Molded plywood & laminated veneer
Legs: Laminated veneer
Seat: Molded plywood
Surface treatment: Water based lacquer
Fittings: Steel
Upholstered version
Upholstered seat: Ecolabelled textile, plywood
Foam: OekoTex class 1 certified
UK version: Foam contains flame retardants melamine
and TCPP and has been tested according to “BS5852
part 2 ignition source 5 crib”
OekoTex class 2 certified.
UK version is not ecolabelled
Tests & Declarations
The chair has passed the furniture test EN 16139 - L1
The chair is not treated with or containing disinfective
biocides.

Dimensions
456 mm
460 mm
483 mm
748 mm

6Join the legs.

7
Ax4
A
x2
Important!
Turn all screws ONLY two rounds. Make sure the screws easily grip the
thread. Then tighten all screws.

8x2
B
B

9
1
2
Start by mounting the dowel in the hole on one side.
Then gently push the opposite leg outwards until the last
dowel fits the second hole.
1
2

10
A
Ax4
Important!
Turn all screws ONLY two rounds. Make sure the screws easily grip the
thread. Then tighten all screws.
x2

D
C
Optional
If you will place the chair on a hard surface (wooden floor, tile floor, etc.)
you can mount the felt gliders to prevent friction.
If you will stack Turn Chairs with wooden seats, mount the stacking gliders
on the screws to prevent scratches. NOTE: If you will stack Turn Chairs with
upholstered seats the stacking gliders should not be mounted.
11
x4
C D x4
C
D

12 The chair is stackable up to three chairs.
Place the seats vertically above each other while rotating the chairs.
Make sure that the backrests do not overlap.

13
Enjoy your new chair.

Warranty
TAKT provides an extend-
ed warranty of 5 years
on ‘T22 Turn Chair’. The
warranty covers breakage
of components and dam-
age occurred because of
deficient craftsmanship
under normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear
or damage to gliders,
surfaces and the like.
In each case, TAKT will
decide whether to re-
pair, offer a discount,
exchange with a compar-
able product, or take the
product back for a full
discount.
Maintenance
TAKT maintenance guide
is accessible on our web-
site
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T22 Turn Chair’.
Spare Parts
TAKT offers spare parts
for ‘T22 Turn Chair’.
Spare parts are avail-
able from TAKT without
charge for a period of 5
years from the date of
purchase if the parts are
found to be faulty during
normal use. If the parts
are damaged by mis-
use spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to you
in the fastest and most
efficient way in order for
your furniture to return to
a functional condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling & Disassembly
We hope that your TAKT
product will serve you
well for many, many
years.
If you at one point want
to recycle it, please sepa-
rate it into components
for sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts, wooden
parts and plastic parts
can be delivered to a
suitable recycling facility
and be recycled.
Mixed material and PUR
parts can be delivered
to a recycling facility for
suitable disposal.
[e-mail]

8x screws 25mm (metal)
4x felt gliders (plast)
4x stacking spacers (PUR)
1x back frame (wood)
2x legs (wood)
1x wooden seat (wood) or upholstered seat (mixed material)
2x wood dowels (wood)

taktcph.com