TAKT T06 Soft Stool Instruction Manual

T06 Soft Stool
Building Instructions

T06 Soft Stool
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with the
building instructions.
Avoid over-tightening.
There is no need for strong force.
2x base components

8x wood dowels
4x metal collars
Flat-head screwdriver
(not provided)
4x screws (45mm)
4x metal-cross dowels
2x strechers
1x seat
4x screws (80mm)
1x Allen key

Product Information
‘T06 Soft Stool’ is a stool
designed for indoor use.
The stool is tested according to
EN-16139 - L1.
Materials
Seat: Molded plywood
Frame: Solid wood
Surface treatment: Water based lacquer
Fittings: Steel
Tests & Declarations
The chair has passed the furniture test EN-16139 - L1.
The chair is not treated with or containing
disinfective biocides.
Weight
3,5 kg

458 mm
464 mm
383 mm
Dimensions

8x8
3
4
5
1
2

x4 x4 x4
C
1
2
÷

10 Place the seat onto the base

11
x4

Enjoy your new stool.

Warranty
TAKT provides an
extended warranty of
5 years on ‘T06 Soft
Stool’. The warranty
covers breakage of com-
ponents and damage
occurred because of
deficient craftsmanship
under normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
wheels, surfaces and
the like.
Maintenance
TAKT maintenance
guide is accessible on
our web site.
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T06 Soft Stool’.
Spare Parts
TAKT offers spare parts
for ‘T06 Soft Stool’.
Spare parts are avail-
able from TAKT without
charge for a period of 5
years from the date of
purchase if the parts are
found to be faulty during
normal use. If the parts
are damaged by misuse
spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to
you in the fastest and
most efficient way in
order for your furniture
to return to a functional
condition.
Please contact TAKT for
inquiries regarding spare
parts.
Recycling &
Disassembly
We hope that your TAKT
product will serve you
well for many, many
years. If you at one
point want to recycle it,
please separate it into
components for sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts can be
delivered to a suitable
recycling facility and be
recycled.
Wooden parts can be
delivered to a suitable
recycling facility and
be recycled or used for
energy recovery through
incineration
[email protected]

1x seat (wood)
4x screws
45mm (metal)
8x dowels
(wood)
4x screws
80mm (metal)
2x strechers
(wood)
4x cross
dowels
(metal)
4x collars (metal)

taktcph.com