TAKT T16 Cross Instruction Manual

T16 Cross
Bar Chair Tube
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for strong
force.
2x base frames

1x footrest
1x backrest
1x seat
Flat-head screwdriver
(not provided)
1x screw (18mm)
A
4x screws (25 or 35mm)
B
4x felt gliders
F
4x plast gliders
G
1x seat pad (optional)
E4x screws (16mm)
C2x screws (20mm)
2x metal collars
D
1x medium Allen key (SW4)
b
1x small Allen key (SW3)
a

Weight
Low version:
6,0 kg
6,8 kg with seat pad
High version:
6,4 kg
7,2 kg with seat pad
Product Information
‘T16 Cross Bar Chair Tube’ is a
bar chair designed for indoor use.
The chair is tested according to
EN-16139 - L1.
Materials
Seat and back: Moulded plywood (oak and beech)
Frame and footrest: Powder coated steel
Surface treatment: Water based lacquer or oil
Fittings: Plastic & steel
Optional
Seat pad: Ecolabelled leather or textile, plywood.
Foam: OekoTex class 1 certified
UK version: Foam contains flame retardants melamine
and TCPP and has been tested according to “BS5852
part 2 ignition source 5 crib”.
OekoTex class 2 certified
Tests & Declarations
The chair has passed the furniture test EN-16139 - L1
The chair is not treated with or containing disinfective
biocides.

447 mm
650 mm
445 mm
895 mm
466 mm
750 mm
445 mm
455 mm
995 mm
479 mm
Dimensions
Low version
High version

6x1
a
Small Allen key
a

7
Optional
If you are mounting an upholstred seat pad - place it on the wooden
seat as showed here before mounting it on the metal frame.

8x4
1
2
3
x2
Important!
Turn all screws in sequence 1 to 4 - ONLY two rounds. Make sure the
screw easily grips the thread.
Small Allen key
a
a
4

9
C
x2
D
Dx2 Cx2
Important!
Turn all screws ONLY two rounds. Make sure the screw easily grips
the thread.
Medium Allen key
b
b

E
10
1
2
3
4
x2
Note!
Turn footrest so that pinhole
mark is placed at the back
towards the floor.
E
Important!
Turn all screws in sequence 1 to 4 - ONLY two rounds. Make sure the
screw easily grips the thread.
x4
a
Small Allen key
a

Push down on seat and tighten all screws 11

12
F G
The stool must be fitted with either felt gliders for hard surfaces
or plast glides for soft surfaces (carpets, etc.)
or
FG
x4 or x4

13
You can later exchange the glider by placing screwdriver
in groove and push down

Warranty
TAKT provides an ex-
tended warranty of 5
years on ‘T16 Cross Bar
Chair Tube’. The warran-
ty covers breakage of
components and dam-
age occurred because of
deficient craftsmanship
under normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
gliders, wheels, surfaces
and the like.
Maintenance
TAKT maintenance
guide is accessible on
our website
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T16 Cross Bar Chair Tube’.
Spare Parts
TAKT offers spare parts
for ‘T16 Cross Bar Chair
Tube’. Spare parts are
available from TAKT
without charge for a
period of 5 years from
the date of purchase if
the parts are found to
be faulty during normal
use. If the parts are
damaged by misuse
spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to
you in the fastest and
most efficient way in
order for your furniture
to return to a functional
condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling & Disassembly
We hope that your TAKT
product will serve you well
for many, many years.
If you at one point want to
recycle it, please separate
it into components for
sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts, wooden parts
and plastic parts can be
delivered to a suitable
recycling facility and be
recycled.
Mixed material parts can
be delivered to a recycling
facility for suitable
disposal.
[email protected]

4x plast gliders or 4x felt gliders (plast)
1x footrest
(metal)
1x wooden seat
(wood)
4x screws 25 or 35mm
(metal)
2x base frames
(metal)
4x screws 16mm
(metal)
1x screw 18mm
(metal)
Optional
1x seat pad (mixed)
1x backrest
(wood)
2x collars
(metal)
2x screws 20mm
(metal)

taktcph.com