TAKT T18 Arc Instruction Manual

T18 Arc
Dining Table
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for
strong force.
2x tabletops
4x aprons

A
B
C
D
E
F
2x table slides
2x leg frames
16x screws (10mm)
8x wood dowels
28x screws (50mm)
8x connecting fitting house
4x double bolt
8x pinol screws (12mm)
1x medium Allen key (SW4)
b
1x small Allen key (SW2,5)
a

Weight
39,2 kg
Product Information
‘T18 Arc Dining Table’
is a table designed for
indoor use. The table is
tested according
to EN 15372 - L2.
Materials
Tabletop: mdf with oak veneer or nano laminate
Frame: Solid wood
Surface treatment: Water based lacquer
Fittings: Steel
Tests & Declarations
The table has passed the furniture test EN 15372 - L2
The table is not treated with or containing disinfective
biocides.

Dimensions
1580 mm
900 mm 736 mm

6Place the tabletops on a blanket. Slide the tabletops together
and turn the table locks.

7
Ax16 asmall Allen key
A
a

8
x12
x8
B C
bmedium Allen key
B
C
b
x2
Important!
Turn all screws ONLY two rounds. Make sure the screw easily grips the
thread.

F
D
9
x4
D E
F
x4
4x bmedium Allen key
D
E
F
b
1
2
3
Important!
Mount the fittings in the sequence 1 to 3. Make sure that the threads in
the connecting fitting house are positioned outwards. Only tighten
the pinol screws loosely.
x2

10 x4
D
D
Important!
Make sure that the threads in the connecting fitting house are positioned
outwards, then place them in the holes and slide the leg frames into the
double bolts.
D