TAKT Curve Coat Rack T21 Instruction Manual

T21 Curve
Coat Rack
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for strong
force.
90cm version:
1x rack 9x knobs
6x knobs
60cm version:
1x rack
3x knobs
30cm version:
1x rack
Optional:
1x shelf

AScrew
30cm
60cm
90cm
Shelf
C
30cm
60cm
90cm
Shelf
PlugB
30cm
60cm
90cm
Shelf
Dowl screw
1x Torx key (TX15)
b
1x Allen key (SW4)
a

Weight
90cm version:
720 g
60cm version:
480 g
30cm version:
240 g
Shelf:
620 g
Product Information
‘T21 Curve Coat Rack’
is a coat rack designed for
indoor use. The coat rack is
tested according to EN-16121 -
L1.
Materials
Rack: Solid wood
Knobs: Solid wood
Shelf: Solid wood
Surface treatment: Water based lacquer
Fittings: Steel
Tests & Declarations
The coat rack has passed the furniture test
EN-16121 - L1
The coat rack is not treated with or containing
disinfective biocides.

Dimensions
900 mm
600 mm
300 mm
280 mm
52 mm
65 mm
170 mm
65 mm

6Ax7 / x4 / x1
a
A

7
Ax2
Optional
Shelf
The shelf can be mounted on the 90cm and 60cm wide coat rack.
The shelf can be positioned in any of the knob holes except for the
outermost holes as these are intended for the wall mounting.
a
A

Find the desired height above the floor. Place a spirit level on the
top edge of the coat rack. Mark the drilling marks through the
outermost knob holes.
8

9
x2B
Two plugs are provided for mounting in hard walls - eg. concrete or brick
walls. Drill the holes at the drilling marks and place the plugs.
B

10 Cx2
Important!
Screw the dowl screw into the wall until it reaches the blank part.
b
C