TAKT T02 Soft Chair Instruction Manual

T02 Soft Chair
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with the
building instructions.
Avoid over-tightening.
There is no need for strong force.
2x sides

2x screws (25mm)
8x wood dowels
6x metal collars
1x Allen key
Flat-head screwdriver
(not provided)
4x screws (45mm)
4x screws (80mm)
4x metal-cross dowels
2x strechers
1x backrest
1x seat

Product Information
‘T02 Soft Chair’ is a chair
designed for indoor use.
The chair is tested according to
EN-16139 - L1.
Materials
Seat and back: Molded plywood (ash and birch)
Frame: Solid ash
Surface treatment: Water-based lacquer
Fittings: Steel
Tests & Declarations
The chair has passed the furniture test EN-16139 - L1.
The chair is not treated with or containing
disinfective biocides.
Weight
4,0 kg

471 mm
459 mm
782 mm
466 mm
Dimensions

6
1
2
3
4
5
a
5
4
3
2
1
x8

÷
80%
1
2
x4 x4 x4

8Place cardboard or blanket between seat and surface.

9
80%
x4

1010 Turn the chair right-side up.

1111
2
1
80%
x 2 x 2

1212 Push down on the seat and make sure all legs are touching the
floor. Then tighten all screws. Notice: Do not over-tighten.

13
Enjoy your new chair. 13

Warranty
The warranty covers
breakage of frames
and damage occurred
because of deficient
craftsmanship under
normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
wheels, surfaces and
the like.
Maintenance
TAKT maintenance
guide is accessible on
our web site.
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T02 Soft Chair’.
Spare Parts
TAKT offers spare parts
for ‘T02 Soft Chair’.
Spare parts are avail-
able from TAKT without
charge for a period of
five years from the date
of purchase if the parts
are found to be faulty
during normal use. If
the parts are damaged
by misuse, spare parts
can be purchased from
TAKT.
TAKT always strives to
deliver spare parts to
you in the fastest and
most efficient way in
order for your furniture
to return to a functional
condition.
Please contact TAKT
for enquiries regarding
spare parts.
Recycling &
Disassembly
We hope that your TAKT
product will serve you
well for many, many
years. If you at one
point want to recycle
it, please separate its
components for sorting.
Loosen screws by
turning the Allen key
counterclockwise to
separate the different
parts.
Metal parts can be
delivered to a suitable
facility for recycling.
Wooden parts can
also be delivered to
a suitable facility for
recycling or used for
energy recovery through
incineration.
[email protected]

1x backrest (wood)
1x seat (wood)
2x sides (wood)
4x screws
45mm (metal)
8x dowels
(wood)
4x screws
80mm (metal)
2x strechers
(wood)
4x cross dowels
(metal)
2x screws
25mm (metal)
6x collars (metal)

taktcph.com