TAKT T23 Instruction Manual

T23 Turn Table
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for
strong force.
4x legs

A
B
1x tabletop
16x screws (35mm)
4x felt gliders
1x Allen key (SW4)

Weight
13,5 kg
Product Information
‘T23 Turn Table’
is a table designed for
indoor use. The table is
tested according
to EN 15372 - L2.
Materials
Tabletop: Plywood with laminate
Legs: Laminated veneer
Surface treatment: Water based lacquer
Fittings: Steel
Tests & Declarations
The table has passed the furniture test EN 15372 - L2
The table is not treated with or containing disinfective
biocides.

Dimensions
890 mm
890 mm
740 mm

6Ax16
A
Important!
Place the tabletop on a blanket. Turn all screws to mount the legs.
Make sure the screws easily grip the thread.
A

B7
x4
B
B
If you will use the table on a hard surface (wooden floor, tile floor, etc.)
you can mount the felt gliders to prevent friction.

Enjoy your new table.

Warranty
TAKT provides an extend-
ed warranty of 5 years
on ‘T23 Turn Table’. The
warranty covers breakage
of components and dam-
age occurred because of
deficient craftsmanship
under normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear
or damage to gliders,
surfaces and the like.
In each case, TAKT will
decide whether to re-
pair, offer a discount,
exchange with a compar-
able product, or take the
product back for a full
discount.
Maintenance
TAKT maintenance guide
is accessible on our web-
site
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T23 Turn Table’.
Spare Parts
TAKT offers spare parts
for ‘T23 Turn Table’.
Spare parts are avail-
able from TAKT without
charge for a period of 5
years from the date of
purchase if the parts are
found to be faulty during
normal use. If the parts
are damaged by mis-
use spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to you
in the fastest and most
efficient way in order for
your furniture to return to
a functional condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling & Disassembly
We hope that your TAKT
product will serve you
well for many, many
years.
If you at one point want
to recycle it, please sepa-
rate it into components
for sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts and plastic
parts can be delivered
to a suitable recycling
facility and be recycled.
Wooden parts can be
delivered to a suitable
recycling facility and
be recycled or used for
energy recovery through
incineration.
[e-mail]

4x legs (wood)
4x felt gliders (plast)
1x tabletop (wood)
16x screws 35mm (metal)

taktcph.com