TAKT T18 Arc Instruction Manual

T18 Arc
Dining Table
Support Leg
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for
strong force.

A4x screws
1x Allen key
1x metal bracket
1x support leg

Weight
2,8kg
Product Information
The support leg is used with
‘T18 Arc Dining Table’.
The table is designed for
indoor use and is tested
according to EN 15372 - L2.
Materials
Support leg: Lacquered solid wood
Metal bracket: Powdercoated steel
Fittings: Steel
Tests & Declarations
The table has passed the furniture test EN 15372 - L2
The table is not treated with or containing disinfective
biocides.

6x4
A
8
Mount the metal bracket on the table slides using the four screws.

7
Fit the support leg in the metal bracket. Slide the leg along
the keyhole in the bracket by the groove in the leg.

8Adjust the adjustable glider until the bottom hit the floor.

9

Warranty
TAKT provides an ex-
tended warranty of 5
years on ‘T18 Arc Dining
Table’. The warranty
covers breakage of com-
ponents and damage
occurred because of
deficient craftsmanship
under normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
gliders, wheels, surfaces
and the like.
Maintenance
TAKT maintenance guide
is accessible on our web-
site
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T18 Arc Dining Table’.
Spare Parts
TAKT offers spare parts
for ‘T18 Arc Dining Table’.
Spare parts are avail-
able from TAKT without
charge for a period of 5
years from the date of
purchase if the parts are
found to be faulty during
normal use. If the parts
are damaged by mis-
use spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to you
in the fastest and most
efficient way in order for
your furniture to return to
a functional condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling & Disassembly
We hope that your TAKT
product will serve you
well for many, many
years.
If you at one point want
to recycle it, please sep-
arate it into components
for sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts and plastic
parts can be delivered
to a suitable recycling
facility and be recycled.
Wooden parts can be
delivered to a suitable
recycling facility and
be recycled or used for
energy recovery through
incineration.
[e-mail]

4x metal bracket (metal)
1x support leg (wood)
1x adjustable glider (metal)
4x screws (metal)

taktcph.com