TAKT T10 Cross Table Instruction Manual

T10 Cross Table
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for strong
force.
4x table legs (solid wood)

1x Allen key
20x screws (75mm)
1x tabletop (wood)

Product Information
‘T10 Cross Table’ is a table
designed for indoor use.
The table is tested according to
EN 15372 - L2.
Materials
Tabletop: Moulded plywood (oak and beech)
Frame: Solid wood
Surface treatment: Water based lacquer
Fittings: Steel
Tests & Declarations
The table has passed the furniture test EN 15372 - L2
The table is not treated with or containing disinfective
biocides.
Weight
12,3 kg

750 mm
750 mm
740 mm
Dimensions

6

x20 7

8

9
Enjoy your new table

Warranty
TAKT provides an ex-
tended warranty of 5
years on ‘T10 Cross Ta-
ble’. The warranty covers
breakage of components
and damage occurred
because of deficient
craftsmanship under
normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
gliders, wheels, surfaces
and the like.
Maintenance
TAKT maintenance
guide is accessible on
our web site
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T10 Cross Table’.
Spare Parts
TAKT offers spare parts
for ‘T10 Cross Table’.
Spare parts are avail-
able from TAKT without
charge for a period of 5
years from the date of
purchase if the parts are
found to be faulty during
normal use. If the parts
are damaged by misuse
spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to
you in the fastest and
most efficient way in
order for your furniture
to return to a functional
condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling &
Disassembly
We hope that your TAKT
product will serve you
well for many, many
years. If you at one
point want to recycle it,
please separate it into
components for sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts can be
delivered to a suitable
recycling facility and be
recycled.
Wooden parts can be
delivered to a suitable
recycling facility and
be recycled or used for
energy recovery through
incineration.
[email protected]

1x tabletop (wood)
4x table legs (solid wood)
20x screws (metal)

taktcph.com