Tally T2030/24 User manual

Maintenance Manual Matrix Printer
T2030/24
T2030/9
T2130/24
T2130/9

7 Spare Parts and Schematics
The spare parts lists show:
1. The position of the part in the exploded drawing.
2. The name of the part.
3. The part number and the printer type to which it belongs.
4. The classification of parts.
5. The quantity used in the printer.
X means: Same part number as the column to the left
– means: No such part in use in this printer type
na means: Not available
* means: Parts marked * belong to one set. There is one part number for all
parts in this set, e.g. when ordering a specific part in the set,
you will receive the entire set.
When ordering parts, it is essential to specify a part number and designation.
Factory repair only
Depot repair
Standardized parts – C-parts
Printer-specific parts
Recommended spare parts
AB C D E
Spare Parts and Schematics
7-1

7.1
Spare Parts
7.1.1
Printer Unit – Assembly 1
Spare Parts Spare Parts and Schematics
7-2

Item Parts Name T2030/9 T2030/24 T2130/9 T2130/24 Quantity Parts
ID no. ID no. ID no. ID no. status
1 Access Cover 15 Assembly 397 000 X 397 001 X B
2 Panel Assembly 397 002 397 003 397 004 397 005 A
4 Top Cover 15 Assembly 397 006 X 397 007 X B
5 Earth PL (10) 397 008 X X X B
6 Power Cord JPN na na na na
7 Plate Frame Support SUB 397 009 X X X B
8 Knob 397 011 X X X B
9 Paper Stand 15 Assembly 397 012 X 397 013 X B
10 I/F Cover 397 014 X X X B
11 Screws (M3x12 P Tite)* 397 015 X X X C
12 Screws (M4x12 P Tite)* 397 015 X X X C
13 Screws (M3x6 S Tite)* 397 015 X X X C
14 Screws (M3x10 P Tite)* 397 015 X X X C
15 Clamp Cable na na na na
16 Rear Cover 397551 397551 397552 397552 B
Spare Parts and Schematics Spare Parts
7-3

7.1.2
Printer Unit – Assembly 2
Spare Parts Spare Parts and Schematics
7-4

Item Parts Name T2030/9 T2030/24 T2130/9 T2130/24 Quantity Parts
ID no. ID no. ID no. ID no. status
1 Cut Sheet Cover 15 Assembly 397 016 X 397 017 X B
2 Slide Guide L 397 018 X X X B
3 Slide Guide R 397 019 X X X B
4 Front Cover 15 Assembly 397 020 X 397 021 X B
5 AD Front Cover 15 397 022 X 397 023 X B
Spare Parts and Schematics Spare Parts
7-5

7.1.3
Printer Unit – Assembly 3
Spare Parts Spare Parts and Schematics
7-6

Item Parts Name T2030/9 T2030/24 T2130/9 T2130/24 Quantity Parts
ID no. ID no. ID no. ID no. status
1 LF Motor 397 024 X X X A
2 SUB Flex Cable 397 025 X X X A
3 SUB PCB PL (24L) 397 026 397 027 397 026 397 027 A
4 Earth PL B 397 028 X X X B
5 Plate Frame Support 15 397 029 X 397 030 X B
6 Shaft Tractor Support 15 397 031 X 397 032 X B
7 Tractor Unit (Set) 397 033 X X X A
8 Tractor Guide – – 397 034 X B
9 Shaft Tractor Drive 15 Assembly 397 035 X 397 036 X B
10 Lever Path Change 397 037 X X X B
11 EMI 1 Wire na na na na
12 Gears (Bush (1))* 397 010 X X X B
13 Gears (Gear Idle P.C.)* 397 010 X X X B
14 Gears (Plate Gear Shift)* 397 010 X X X B
15 Gears (Gear Idler (1) Assembly)* 397 010 X X X B
16 Gears (Gear Idler (2))* 397 010 X X X B
17 Gears (Gear 360T)* 397 010 X X X B
18 Springs (SP F/T Lever)* 397 039 X X X B
19 Screws (M3x10 P Tite)* 397 015 X X X C
20 Screws (M3x6 S Tite)* 397 015 X X X C
21 Screws (M3x8 S Tite)* 397 015 X X X C
22 Screws (M3x6 LWSW)* 397 015 X X X C
23 Screws (E4)* 397 015 X X X C
24 Screws (Wave Washer 6)* 397 015 X X X C
25 Plate P.G. Lift 397 040 X X X B
Spare Parts and Schematics Spare Parts
7-7

7.1.4
Printer Unit – Assembly 4
Spare Parts Spare Parts and Schematics
7-8

Item Parts Name T2030/9 T2030/24 T2130/9 T2130/24 Quantity Parts
ID no. ID no. ID no. ID no. status
1 Print Head 397 041 397 042 397 041 397 042 A
2 Carrier Assembly 397 043 X 397 044 X A
3 Carrier Shaft 14/15 397 045 X 397 046 X B
4 Ribbon Gear Holder Assembly 397 047 X X X B
5 CA Motor Bracket Assembly 397 048 X X X B
6 S.K. Earth PL A 397 049 X X X B
7 Ribbon Gear PL 397 050 X X X B
8 Ribbon Drive Gear 397 051 X X X A
9 CA Motor (HB) 397 052 X X X A
10 Gap Set Lever 397 053 X X X B
11 Idle Pulley Assembly 397 054 X X X B
12 Gears (Gap Set Bush A)* 397 010 X X X B
13 Gears (Pulley Flange A)* 397 010 X X X B
14 Gears (Pulley A Assembly)* 397 010 X X X B
15 Gears (Gap Set Bush B)* 397 010 X X X B
16 Gears (Gap Set Collar)* 397 010 X X X B
17 Screws (M4x8 SWSW)* 397 015 X X X C
18 Screws (M3x8 P Tite)* 397 015 X X X C
19 Screws (M3x6 S Tite)* 397 015 X X X C
20 Screws (M3x6 LWSW)* 397 015 X X X C
Spare Parts and Schematics Spare Parts
7-9