Target DSDTRDSKBK User manual

double trestle desk
>> assembly instructions
style # DSDTRDSKBK (black)
dpci # 249-14-0161
tcin # 15652801
style # DSDTRDSKGY (gray / caramel)
dpci # 249-14-0159
tcin # 15617916
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
assembly 6-13
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 14
wooden dowel
(H2) x 12
1-1/2” pan-head screw
(H3) x 24
1/4” x 1-1/6” bolt
(H4) x 8
lock washer
(H5) x 10
washer
(H6) x 1
allen wrench
(H7) x 1
15mm pan head screw
(H8) x 1
wall strap
(H9) x 1
wall anchor
(H10) x 1
38mm wall screw

exploded diagram
ITEM DESCRIPTION QUANTITY
1 desktop 1
2 side frame 2
3 left center frame 1
4 right center frame 1
5 upper rail 2
6 rear rail 1
7 upper shelf 2
8 lower shelf 2
5

6
step 1: attach upper rails to desktop
(H1) x 4
wooden dowel
(H2) x 6
1-1/2” pan-head screw
1.1. Do not over tighten screws.

step 2: attach right center frame
(H1) x 2
wooden dowel
(H3) x 2
1/4” x 1-1/6” bolt
(H4) x 2
lock washer
(H5) x 2
washer
(H6) x 1
allen wrench
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Align bolts with pre-drilled holes.
2.3. Do not over tighten bolts.
7
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

8
step 3: position left center frame
(H1) x 2
wooden dowel
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

9
step 4: position rear rail
(H1) x 2
wooden dowel
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. When installing lower rail (6) gently pull left center frame (3) away from right center frame (4).

step 5. attach left and right center frames, rear rail and upper rails
(H3) x 2
1/4” x 1-1/6” bolt
(H2) x 6
1-1/2” pan-head screw
(H4) x 2
lock washer
(H5) x 2
washer
(H6) x 1
allen wrench
5.1. Align bolts and screws with pre-drilled holes.
5.2. Do not over tighten bolts.
5.3. Do not over tighten screws.
10