Target Halsted FRS80712GST3 User manual

>>assembly instructions TM
halsted
steel wicker coffee table
style # FRS80712GST3
dpci # 009008273

2
Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
ATTENTION:
This Table is not intended for use during any kind of inclement weather and the manufacturer is not, and can not be,
held responsible for any damages caused as a result of such weather. Weather-related damage, or damage as a
result of the Table not being stored properly when not in use, is not the responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, sleet), freezing
conditions and extreme heat, the Table needs to be stored in a dry, sheltered place to prolong the life and to avoid
damage to the Table.
IMPORTANT WARNING:
Unpack the box on a clean, soft, level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

3
WARRANTY:
This Table comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your new table, please call the customer service number below.
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2018

7-8
4
table of contents
introduction
hardware
parts list
assembly
2-3
5
6
QUESTIONS?
Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have t h e style number and DPCI number r eady when calling.

5
hardware
(Part E)×1
allen wrench
(Part C)×12
M6*15mm screw
(Part D)×12
washer

6
ITEM DESCRIPTION QUANTITY
table leg
table top 1
4
A
B
A
B

7
step 01:
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
(Part C)×12
M6*15mm screw
(Part D)×12
washer
(Part E)×1
allen wrench
Do not completely tighten screws until all screws are in place.
1. Line up the bolt holes on the end of the table leg (B) with the corresponding bolt
holes on the table top (A). Secure with M6*15mm screws (C) and washers (D) using
allen wrench (E).
2. Repeat above step until the 4 table legs (B) are secured to the table top (A) .
C
A
B
D

8
step 02:
1. Tighten all the screws. Set the table in an upright position on
a flat level surface.
You are now ready to enjoy your new table.

9

TM
2018 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.