Target Berkshire FWS80633 User manual

6-person wicker dining table
style # FWS80633
dpci # 009000241
>>assembly instructions TM
Berkshire

Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
ATTENTION:
This Table is not intended for use during any kind of inclement weather and the manufacturer is not
and can not be held responsible for any damages caused as a result of such weather. Weather-related
damage, or damage as a result of the Table not being stored properly when not in use is not the
responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail,
sleet), freezing conditions and extreme heat, the Table needs to be stored in a dry sheltered place to
prolong the life and to avoid damage to the Table.
2
IMPORTANT WARNING:
Unpack the box on a clean soft level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

WARRANTY:
This Table comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your table, please call the customer service number below.
3
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2020
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-9
QUESTIONS?
4Please call 855-MYTGTHOME (855-698-4846) parts and service. For faster service, have th e style number and DPCI number ready when calling.

hardware
5
(Part D)×16
M6*20mm bolt with washer
(Part E)×1
allen wrench

ITEM DESCRIPTION QUANTITY
1
A
6
table top
B
C
table leg
connect bar
2
1
A
C
B

7
step 01:
(Part D)×12
M6*20mm bolt with washer
(Part E)×1
allen wrench
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. Attach the table leg (B) to the table top (A) by lining up the bolt holes
on the table leg (B) with the corresponding bolt holes on the table top (A).
2. Secure with M6*20mm bolt with washer (D) using allen wrench (E).
3. Repeat above step until all the table legs (B) are secured to the table top (A).
Do not completely tighten screws until all screws are in place.
A
B
D

8
step 02:
(Part D)×4
M6*20mm bolt with washer
(Part E)×1
allen wrench
1. Attach the connect bar (C) to the table leg (B) by lining up the bolt holes on the
connect bar (C) with the corresponding bolt holes on the table leg (B).
2. Secure with M6*20mm bolt with washer (D) using allen wrench (E).
Do not completely tighten screws until all screws are in place.
D
B
C

step 03
1. Tighten all the bolts.
2. Turn the table to upright position onto a flat level surface.
You are now ready to enjoy your new table.
9

10

TM
2020 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.