Target paulo User manual

paulo
console table
>> assembly instructions
style # TGELCNTBWH (weathered white)
dpci # 249-16-9757
tcin # 53287131
style # TGELCNTBGY (weathered smoke)
dpci # 249-16-9758
tcin # 53287136
style # TGELCNTBBR (midtone)
dpci # 249-16-9759
tcin # 53287139
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-17
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 10
wooden dowel
(H2) x 9
cam bolt
(H3) x 9
cam
(H4) x 23
at head screw
(H5) x 8
short round head bolt
(H6) x 1
allen wrench
(H7) x 4
short at head bolt
(H8) x 4
long round head bolt
(H9) x 2
handle
(H10) x 10
washer
(H11) x 4
long round head screw
(H12) x 6
long at head bolt
(H13) x 1
short round head screw
(H14) x 1
wall strap
(H15) x 1
wall anchor

exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B middle panel 1
C left side panel 1
D right side panel 1
E back panel 1
F bottom panel 1
G drawer face 1
H drawer front 1
I drawer left side 1
J drawer right side 1
K drawer back 1
L drawer bottom 1
M drawer support 2
N left side frame 1
O right side frame 1
P lower rail 1
5

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
1. 2. 3.
4. 5.

step 1: prepare top panel
(H2) x 7
cam bolt
1.1. Screw-In cam bolts must be screwed down ush.
1.2. Refer to page 6 for instructions on how to use the cam lock system.
1.3. Do not over tighten bolts.
7

step 2: attach left and right side panels to back panel
(H1) x 2
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.
8

step 3: attach top and middle panels
(H1) x 8
wooden dowel
(H3) x 7
cam
(H4) x 7
at head screw
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Do not over tighten bolts.
9
at head screw
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

step 4: attach lower rail, left and right side frames
(H5) x 4
short round
head bolt
(H6) x 1
allen wrench
(H7) x 4
at head bolt
(H10) x 4
washer
4.1. Do not over tighten bolts.
10
(H7)