Target Britanna FWS70487B User manual

>>assembly instructions TM
4 person Dining Table
style # FWS70487B
dpci # 009000882
Brittana

2
Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
ATTENTION:
This Table is not intended for use during any kind of inclement weather and the manufacturer is not, and can not be,
held responsible for any damages caused as a result of such weather. Weather-related damage, or damage as a
result of the Table not being stored properly when not in use, is not the responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, sleet), freezing
conditions and extreme heat, the Table needs to be stored in a dry, sheltered place to prolong the life and to avoid
damage to the Table.
IMPORTANT WARNING:
Unpack the box on a clean, soft, level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

3
WARRANTY:
This Table comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your new table, please call the customer service number below.
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2019

4
table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-9
QUESTIONS?
Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have t h e style number and DPCI number r eady when calling.

5
hardware
(Part E)×1
allen wrench
(Part D)×16
M6*18 mm screw with washer

6
ITEM DESCRIPTION QUANTITY
table leg
table top
1
4
1
A
B
C
connector bracket
C

7
step 01:
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. Attach the table leg (C) to table top (A) by lining up screw holes on table top (A)
with corresponding screw holes on the table leg (C).
Secure with M6*18 mm screw with washer (D), tighten using allen wrench (E).
Repeat this step until another leg (C) is secured to the table top (A).
Do not completely tighten screws until all screws are started.
(Part E)×1
allen wrench
(Part D)×16
M6*18 mm screw with washer

8
step 02:
1. Attach the connector bracket (B) to the table leg (C) by lining up screw holes
on connector bracket (B) with corresponding screw holes on the table leg (C).
Secure with M6*18 mm screw with washer (D), tighten using allen wrench (E).
Repeat this step until another connector bracket (B) is secured to the table leg (C).
Do not completely tighten screws until all screws are started.
(Part E)×1
allen wrench
(Part D)×16
M6*18 mm screw with washer

9
step 03:
1. Tighten all the screws. Set table in an upright position on a
flat level surface
You are now ready to enjoy your new table.

10

TM
T9102 arget. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.