Target dinsmoor UPVISDNC01 User manual

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
>>
dinsmoor
dining chair
assembly instructions
style # UPVISDNC01 (rilla aluminum)
dpci # 249-02-3320
tcin # 51958769
style # UPVISDNC02 (rilla cocoa)
dpci # 249-02-3321
tcin # 51958770

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.

3
table of contents
introduction 2
hardware 4
parts list 5
assembly 6-9
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 1
M8 x 45mm bolt
(H2) x 4
M8 x 55mm bolt
(H3) x 4
M8 x 85mm bolt
(H4) x 9
washer
(H5) x 9
lock washer
(H6) x 1
allen wrench

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A back 1
B seat 1
C front leg 2

6
step 1: remove hardware
1.1. Remove hardware from zippered pocket.
zippered pocket

step 2: attach seat to back
(H1) x 1
M8 x 45mm
bolt
(H3) x 4
M8 x 85mm
bolt
(H4) x 5
washer
(H5) x 5
lock washer
2.1. Align bolts with pre-drilled holes.
2.2. Hand tighten bolts.
7
(H1)

8
step 3: attach front legs
(H2) x 4
M8 x 55mm
bolt
(H4) x 4
washer
(H5) x 4
lock washer
3.1. Align bolts with pre-drilled holes.
3.2. Hand tighten bolts.

step 4: leg adjustments
(H6) x 1
allen wrench
4.1. Check to make sure all legs sit evenly on the oor. If not, loosen bolts and adjust.
4.2. Once adjusted, use provided allen wrench to nish tightening bolts, being careful to not over tighten
9

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
10
300 lbs.
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.