Target 340H User manual

page 1 of 11
Thank you for purchasing the bedbase kitset bed.Please read the
instructions carefully to ensure safe operation of product.
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required
Size : DOUBLE:1880MM X 1370MM X 340MM/280MM
QUEEN :2030MM X 1530MM X 340MM/280MM
Colour : A02-32
NOT INCLUDED
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION
10.5

page 2 of 11
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
This product is intended for a maximum person's weight of 130kg per side. Do not exceed this
weight
Incorrect installation could lead to injury, take care following instructions.
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching
Check the pack and make sure you have all the parts listed
Ensure that this product is fully assembled and secured as illustrated before use
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Dismantle for transportation.
Only use recommended accessories.
Tools are included.
WARNINGS
When moving the bed Always lift Carefully into position NEVER DRAG OR PULL YOUR BED
OTHERWISE THIS COULD DAMAGE ESSENTIAL COMPONENTS.
DO make sure the legs remain in contact with the ground.
DO keep small parts out of reach of children.
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
DO NOT stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 3 of 11
789
123
456
Description:Headboard
Qty:1pc
Carton No:1 of 2
Description:Footboard
Qty:1pc
Carton No:1 of 2
Description:Side rail(left&right)
Qty:2pcs
Carton No:2 of 2
Description:Centre cross rail
Qty:1pc
Carton No:2 of 2
Description:Wooden slat
Qty:1pc
Carton No:1 of 2
Description:Wooden legs
Qty:4pcs
Carton No:1 of 2
Description:Centre rail
Qty:1pc
Carton No:2 of 2
Description:Centre support legs
Qty:2pcs
Carton No:2 of 2
Please check the pack contents before assembling the product.If any components are missing,
please contact your retailer.The fittings pack contains small items that should be kept away from
small children
Parts
Description:Cross support legs
Qty:2pcs
Carton No:2 of 2
10
Description:Triangle plate
Qty:4pcs
Carton No:1 of 2
Description:Thickened
triangular plate Qty:4pcs
Carton No:1 of 2
Description:Iron sheet
Qty:4pcs
Carton No:1 of 2
12
11
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

Bolt-5/16*30mm 14
Bolt-5/16*45mm
Washer*5/16
Spring Washer*5/16
Washer*1/4
Spring Washer*1/4
Butterfly Nut
4MM Allen Key
5MM Allen Key
10 20 30 40 50 60 70 80 90 100
2
20
20
38
38
3
3
Plastic Washer
A
B
C
page 4 of 11
1
1
(Not to scale)
Ref Dimennsions Qty
Fixings(to scale)
K
L
Wood Washer 8
D
E
F
G
H
I
J
M
RUBBER HEAD
NUT 4
Bolt-1/4*20mm 32
3
Bolt-1/4*57mm
Nut-5/16 4
Spanner 1
N
O
P
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 5 of 11
STEP 1 Parts
Required
STEP 2 Parts
Required
11.Thickened
triangular plate X 4
12.Iron sheet X 4
6.LEG X 4
D X 4
E X 4
L X 4
P X 1
D
Make sure the bed is square.
Note:THEN tighten all bolts 100% using allen key
1.HEADBOARD X 1
2.FOOTBOARD X 1
3.Side Rails X 2
N X 1
A X 8
D X 8
E X 8
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 6 of 11
STEP 3 Parts
Required
STEP 4 Parts
Required
10.TRIANGLE
PLATE X 4
M X 1
K X 16
F X 16
G X 16
M X 1
K X 16
G X 16
F X 16
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 7 of 11
STEP 5 Parts
Required
STEP 6 Parts
Required
7.Centre Rail X 1
8.CENTRE
SUPPORT LEGS
X 2
B X 2
E X 2
D X 2
N X 1
7.Centre Rail X 1
A X 4
E X 4
D X 4
N X 1
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 8 of 11
STEP 7 Parts
Required
Parts
Required
STEP 8
4.CENTRE CROSS
RAIL X 1
9.CROSS
SUPPORT LEGS
X 2
A X 2
E X 2
D X 2
N X 1
4.CENTRE CROSS
RAIL X 1
C X 2
F X 4
G X 4
I X 2
M X 1
H X 2
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 9 of 11
STEP 9 Parts
Required
Parts
Required
STEP 10
5.WOODEN SLAT
X 1
C X 1
F X 2
G X 2
I X 1
M X 1
H X 1
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 10 of 11
STEP 11 Parts
Required
Parts
Required
STEP 12
O X 4
J X 8
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION

page 11 of 11
Complete Assembly
Your bed frame is now completely assembled
BEDBASE KITSET 340H & 280H DOUBLE / QUEEN
ASSEMBLY INSTRUCTION