Target Fairglen TGFGCDSKWH User manual

>>
fairglen
console desk
assembly instructions
style # TGFGCDSKWH (white)
dpci # 249-14-5918
TCIN # 54158487
© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-15
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 22
wooden dowel
(H2) x 20
cam bolt
(H3) x 20
cam
(H4) x 2
at head screw
(H5) x 1
wall anchor
(H6) x 1
wall screw
(H7) x 1
truss head screw
(H8) x 1
wall strap
(H9) x 2
washer

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B left side panel 1
C right side panel 1
D bottom panel 1
E partition 1
F back panel 1
G stretcher 1
H sliding door 1

6
how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
1. 2. 3.
4. 5.

7
step 1: attach top panel to back panel
(H1) x 2
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
1.1. Carefully tap small wooden dowels into place in top panel. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush in top panel.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
1.4. Do not over tighten bolts.

8
step 2: attach partition to top panel
(H1) x 2
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
2.1. Carefully tap small wooden dowels into place in top panel. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush in top panel.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.
nished edge

9
step 3: attach bottom panel
(H1) x 2
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
3.1. Carefully tap small wooden dowels into place in bottom panel. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush in bottom panel.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Do not over tighten bolts.
nished edge

10
step 4: attach right side panel and stretcher
(H1) x 8
wooden dowel
(H2) x 6
cam bolt
(H3) x 4
cam
4.1. Carefully tap small wooden dowels into place in right side panel. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush in right side panel.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
4.4. Do not over tighten bolts.

11
step 5: secure stretcher to right panel and install sliding door
(H4) x 1
at head screw
5.1. Align at head screw with pre-drilled hole to attach stretcher to right side panel. Do not over tighten screw.

12
step 6: attach left side panel
(H1) x 8
wooden dowel
(H2) x 6
cam bolt
(H3) x 4
cam
6.1. Carefully tap small wooden dowels into place in left side panel. Leave 1/2” of the dowels sticking out.
6.2. Screw-In cam bolts must be screwed down ush in left side panel.
6.3. Refer to page 6 for instructions on how to use the cam lock system.
6.4. Do not over tighten bolts.

13
step 7: secure stretcher to left side panel
(H4) x 1
at head screw
7.1. Align at head screw with pre-drilled hole to attach stretcher to left side panel. Do not over tighten screw.

14
step 8: attach back panel
(H3) x 4
cam
8.1. Finish attaching back panel by installing remaining cams.
8.2. Refer to page 6 for instructions on how to use the cam lock system.
8.3. Do not over tighten bolts.

15
step 9: install anti-tip kit
(H7) x 1
truss head
screw
(H8) x 1
wall strap
(H5) x 1
wall anchor
(H6) x 1
wall screw
(H9) x 2
washer
Position against wall
Mark position of strap hole on wall
Drill 1/4” hole
Tap in wall anchor
Fasten anti-tip strap with wall screw
provided
(H6)
(H5)
(H9)
adjustable leg levelers
(H9)
(H8)
(H7)

16

  
 

 
  
  
     
 
   
 
     

    

  
    
 
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
70 lbs.
20 lbs.
20 lbs.

© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.