Target Warwick FKWWNRCNBR User manual

>> assembly instructions
warwick
narrow console table
fawn brown
style # FKWWNRCNBR
dpci # 249-17-9654
TCIN # 77471734
jet black
style # FKWWNRCNBK
dpci # 249-17-9116
TCIN # 78054358
oxford white
style # FKWWNRCNWH
dpci # 249-17-8871
TCIN # 78208011
natural
style # FKWWNRCNNT
dpci # 249-17-2030
TCIN # 80789808
© 2020 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
tools needed
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.

3
2
4
5
6
7-12
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly

4
(H1) x 22 (H2) x 12 (H3) x 12 (H4) x 4 (H5) x 4
(H7) x 1(H6) x 4 (H10) x 1(H9) x 1(H8) x 1
(H11) x 1 (H12) x 2
hardware
wooden dowel cam bolt cam bolt lock washer
washer allen wrench small pan head screw wall strap wall anchor
wall screw washer

5
exploded diagram
ITEM DESCRIPTION QUANTITY
1 top panel 1
2 left side frame 1
3 right side frame 1
4 bottom panel 1
5 back panel 2

6
1. 2. 3.
4. 5.4. 5.
how to use the cam lock system
Screw cam bolt into panel
Rotate cam(s) clockwise 180° to
lock panels together
Panels should be tight against each
other and connection should be rigid
Push cam into panel - arrow feature
on cam top points to panel edge
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)

7
(H1) x 3 (H2) x 2 (H3) x 2
1.1. Carefully tap small wooden dowels into place on top panel. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush into top panel.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
step 1: attach back panel to top panel
wooden dowel cam bolt cam

8
(H1) x 4 (H2) x 4 (H3) x 3
step 2: attach right side frame to top / back panel
2.1. Carefully tap small wooden dowels into place on side frame. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush into side frame.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
wooden dowel cam bolt cam

9
(H1) x 3 (H2) x 2 (H3) x 2
step 3: attach back panel to bottom panel
wooden dowel cam bolt cam
3.1. Carefully tap small wooden dowels into place on bottom panel. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush into bottom panel.
3.3. Refer to page 6 for instructions on how to use the cam lock system.

10
(H1) x 4 (H4) x 2
(H5) x 2 (H6) x 2 (H7) x 1
(H3) x 1
step 4: attach bottom panel to right side frame
4.1. Carefully tap small wooden dowels into place on side frame. Leave 1/2” of the dowels sticking out.
4.2. Align bolts with pre-drilled holes in bottom panel.
4.3. Do not over tighten bolts.
wooden dowel bolt
lock washer washer allen wrench
cam