Target Warwick side table FKWWSDTBBR User manual

warwick
side table
assembly instructions
style # FKWWSDTBBR (fawn brown)
dpci # 249-16-9341
tcin # 52416784
style # FKWWSDTBWH (white)
dpci # 249-17-3051
tcin # 54155832
>>
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-12
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

hardware
(H1) x 14
wooden dowel
(H2) x 6
cam bolt
(H3) x 6
cam
(H4) x 8
bolt
(H5) x 8
lock washer
(H6) x 8
washer
(H7) x 1
allen wrench
(H8) x 2
handle bolt
(H9) x 1
handle
(H10) x 4
at head screw
4

exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B left side frame 1
C right side frame 1
D shelf 1
E back panel 1
F drawer face 1
G left drawer side 1
H right drawer side 1
I drawer back 1
J drawer bottom 1
5

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
1. 2. 3.
4. 5.

step 1: attach back panel to right side frame
(H1) x 1
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7
nished edge

step 2: attach top panel
(H1) x 2
wooden dowel
(H4) x 2
bolt
(H5) x 2
lock washer
(H6) x 2
washer
(H7) x 1
allen wrench
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Align bolts with pre-drilled holes.
2.3. Do no over tighten bolts.
8

9
step 3: attach left side frame
(H1) x 3
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
(H4) x 2
bolt
(H5) x 2
lock washer
(H6) x 2
washer
(H7) x 1
allen wrench
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Align bolts with pre-drilled holes.
3.5. Do no over tighten bolts.

10
step 4: attach shelf
(H1) x 4
wooden dowel
(H4) x 4
bolt
(H5) x 4
lock washer
(H6) x 4
washer
(H7) x 1
allen wrench
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Align bolts with pre-drilled holes.
4.3. Do no over tighten bolts.

step 5: assemble drawer starting with drawer sides / nish assembly with handle
(H1) x 4
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
(H8) x 2
handle bolt
(H9) x 1
handle
(H10) x 4
at head screw
5.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
5.2. Screw-In cam bolts must be screwed down ush.
5.3. Refer to page 6 for instructions on how to use the cam lock system.
5.4. Align screws with pre-drilled holes.
5.5. Do not over tighten screws.
11
(H1) x 4
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
(H8) x 2
handle bolt
(H9) x 1
handle
(H10) x 4
at head screw
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down ush.
Refer to page 6 for instructions on how to use the cam lock system.
Align screws with pre-drilled holes.
Do not over tighten screws.

12
step 6: install drawer

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
13
30 lbs.
25 lbs.
15 lbs.
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

Quality That Lasts A Lifetime
The maker of this product has extended his craftsmanship to
include Salice hinges and/or other Salice products.
Having undergone severe usage tests and met industry standards
worldwide, our products confirm our commitment to pleasing the
most discriminating customer - you.
THE
LIFETIME GUARANTEE AND LIMITED WARRANTY*
Salice America, Inc., warrants that all hinges and/or Salice products contained in
this product, (but not the product itself) against defects in material and workman-
ship for as long as the original consumer purchaser owns the products. Salice
will send the original consumer purchaser a new Salice hinge to replace any
defective Salice hinge subject to this warranty without charge. The warranty is a
warranty of replacement only. Salice specifically does not warrant removal of the
defective hinge nor installation of a new hinge. This warranty does not cover
hinges which have been incorrectly installed, exposed to excessive loads or
abused.
To obtain a replacement, you should, within 30 days of discovery of the defect,
remove the defective hinge and mail it postage prepaid to:
SALICE AMERICA Inc.
2123 CROWN CENTRE DRIVE
USA - CHARLOTTE NC 28227
Enclose a brief letter explaining the defect with a copy of your proof of purchase.
Allow approximately four (4) weeks for delivery of the replacement.
ALLWARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTHABOVE. However, some states do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY STATE LAWAS HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU
OF ANY OTHER WARRANTIES OF SALICE WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS.
IN NO EVENT SHALL SALICE BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE USE,
INSTALLATION, PERFORMANCE OR FAILURE OF ITS PRODUCT. However, some states do not allow the exclusion of limitation of
incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights
and you may also have other rights which vary from state to state.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.