Teknion Navigate Mid Gable-Solid Operating and maintenance instructions

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Rev.01
Page: 1 of 18
HABN_223b
1
1.3
2.2
2.1
3.4
3.3
3.1
3.4
3.3
3.2
3.10
2.7
3.11
REV.# By. Date Chkd. Description
00 NK\AL May 2019 XX New Release
01 NK Sept 2019 XX
Changes as per
Roma's Feedback
Navigate Mid Gable - Solid (HNBCGMSN), Navigate Cable Channel (HNBFCN), Navigate End Gable - Solid
(HNBCGESN)

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 2 of 18
HABN_223b
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY.
1. Navigate Wire Channel (HNBFCN) x1
1
CABLE
CHANNEL ASSY
- DOUBLE
SIDED
HNBFCNB 1
1.1
CENTER RAIL
EXTRUSION CAP
CUT LENGTH
A23-5200-X 1
1.2
ACCESS DOOR
NAVIGATE
WIRE CHANNEL
N01-4420 2
1.3
SUPPORT BRKT -
SCREEN RAIL
A16-3009 2
1.4
5/16-18 HEX
NUT, 1/2 A/F,
.265 THK.
E01-0755 8
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY.
1.5
1/4-20X5/8"
MACH SCR,
BLACK,
QUAD,TRUSS
E01-0113 8
1.6
#8-18X1/2"CROSS
SQUARE
COMB.SELF
E07-0012 12
1.7
HANGER - CLUB
TALK
A16-2364 2
1.8
WIRE MANAGER
CLIP
B02-2007 12
Part & Product Identification

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 3 of 18
HABN_223b
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY
2. Navigate End Gable - Solid (HNBCGESN) x1
2.1
COVER FOR END
GABLE, DOUBLE
SIDED, HAB
C07-4595-X 1
2.2
INSIDE COVER ASSY
FOR WOOD END
GABLE, DOUBLE
SIDED, HAB
N09-8799-X 1
2.3
BOTTOM BRACKET
FOR WOOD END
GABLE, HAB
A16-3020 2
2.4
HANGING BRACKET
FOR WOOD END
GABLE, HAB
A16-3021 2
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY
2.5
1/4-20 UNCx0.500"
2A,CROSS/SQ.COMB.S
OCK.,TRS.HEAD,MAC
H.SCR.,STEEL,ZN
E01-0110 4
2.6
#10X1/2" TAP SCR,
QUAD,PAN
E01-0023 2
2.7
GABEL CONNECTING
PLATE
A16-3651 2
Part & Product Identification

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 4 of 18
HABN_223b
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY.
1
NAVIGATE WIRE
CHANNEL DOUBLE
SIDED
HNBFCNB\70 1
1.1
1.2
1.3
1.4
1.4.1
1.4.1.1
1.4.2
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
2.1
2.1.1
2.1.1.1
2.1.2
2.1.3
2.1.4
2.2
2.2.1
2.2.1.1
2.2.2
2.2.3
2.2.4
2.3
2.4
2.4.1
2.5
4
TOP COVER FOR
METAL MID GABLE
W/POWER POLE,
DOUBLE SIDED,
HAB
A16-7491\72 1
4.1 Sheet -
5
TOP COVER
W/CUTOUT FOR
METAL MID GABLE
W/POWER POLE,
DOUBLE SIDED,
HAB
A16-7451\72 1
5.1 Sheet -
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY.
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY.
3. Navigate Mid Gable - Solid - Mid Condition (HNBCGMSN) x1
3.1
SIDE COVER FOR MID
GABLE, DOUBLE SIDED,
HAB
C05-8921-X 1
3.2
SIDE COVER FOR MID
GABLE, DOUBLE SIDED,
HAB
C05-8863-X 1
3.3
FRONT COVER FOR MID
GABLE, HAB
C05-8864 2
3.4 &
TOP COVER FOR WOOD
MID GABLE W/POWER
POLE, DOUBLE SIDED,
HAB
A16-3087-X
&
A16-3088-X
1
Each
3.5
HANGING BRACKET,
FOR WOOD MID GABLE,
HAB
A16-3203 4
3.6
BOTTOM CONNECTING
BRKT FOR WOOD MID
GABLE, HAB
A16-3026 4
ITEM
NO.
PREVIEW DESCRIPTION
PART
NUMBER
QTY.
3.7
FRONT HANGING BRKT
FOR WOOD MID GABLE,
HAB
A16-3028 2
3.8
BOTTOM BRKT FOR
WOOD MID GABLE, HAB
A16-3027 2
3.9
1/4-20 UNCx0.500"
2A,CROSS/SQ.COMB.
E01-0110 12
3.10
GABEL BOTTOM ANGLE
BAR, DOUBLE SIDED,
HAB
A16-3655-X 2
3.11
GABEL CONNECTING
PLATE
A16-3651 4
3.12
#10X1/2" TAP SCR,
QUAD,PAN
E01-0023 4
3.13
COVER PLATE FOR
BASEFEED CUTOUT, HAB
A16-3690 1
3.14
COVER PLATE FOR
CABLE CUTOUT, HAB
A16-3689 4
3.15
SCREW, WOOD,#6 X
7/16", DEEP THREAD,
QUAD, TRUSS
E04-0050 10
3.16
TOP COVER FOR WOOD
MID GABLE, HAB
(OPTIONAL)
A16-3029-X 2
Part & Product Identification

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 5 of 18
HABN_223b
1
1.3
1.4
STEP 1: Remove Support Brackets.
REMOVE SUPPORT BRACKETS

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 6 of 18
HABN_223b
2.1
2.4
2.3
2.3
1.3
2.2
2.5
ATTACH GABLE SUPPORT BRACKET
STEP 2: Attach and Fasten Gable Brackets. STEP 3: Insert Support Bracket through the cut-out on the Inside Cover Assembly as shown.
ATTACH SUPPORT BRACKET

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 7 of 18
HABN_223b
2.7
Leg Hex Bolt
Leveler
NOTE: Parts of the
Frame are hidden for
Illustration Purpose.
2.2
ATTACH CONNECTING PLATES TO FRAME LEGS
STEP 4: Loosen Legs Hex Bolt on both Legs to allow enough clearance for gable connecting
plate. Then Fasten Gable Connecting Plates to Frame Legs.
STEP 5: Mount Inside Cover Assembly onto Frame Stretcher Bar. Make sure the face of the
Inside Cover assembly is flush with the Leg as shown Above.
MOUNT INSIDE COVER ASSEMBLY

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 8 of 18
HABN_223b
2.6
1.5
SECURE INSIDE COVER IN PLACE
STEP 6: Make sure the face of the Inside Cover Assembly is flush with the Leg. Secure Inside
Cover Assembly to Gable Connecting Plate on both sides using Tap Quad Pan screws
provided.
STEP 7: Secure Inside Cover Assembly to Stretcher Bar with Bolts.
SECURE INSIDE COVER ASSEMBLY TO FRAME

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 9 of 18
HABN_223b
2.1
NOTE: Parts of the Frame are
hidden for Illustration Purpose.
Section View Section View
STEP 8:Mount Outside Cover Assembly to the highlighted part of the Inside Cover Assembly as shown.
MOUNT OUTSIDE COVER ASSEMBLY

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 10 of 18
HABN_223b
NOTE: Please refer to installation guide HAB_322b.
NOTE: Cable Channels are Hidden for Illustration Purpose.
Connecting
Bracket
1/4-2, 5/8" Long Screw
3.11
Leg Hex Bolt
STEP 9: Loosen Hex Bolt to allow enough room for Gable Connecting Plate. Fasten Gable Connecting Plates to Frame Legs.
ATTACH CONNECTING PLATES TO FRAME

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 11 of 18
HABN_223b
3.10
3.10
Hex Bolt 5/16"
x1" Long ZP
Connecting
Bracket
Underside View
NOTE: Refer to installation
guide HAB_322b for detail.
Connecting
Bracket
Hex Bolt 5/16"
x1" Long ZP
3.12
3.12
MOUNT BOTTOM ANGLE BAR
STEP 10: Mount Bottom Angle Bar and Secure to Gable Connecting Plate on both sides
using Tap Quad Pan screws provided.
Optional: If Mid Power Pole is Specified. Please fasten Connecting Bracket to the Underside
of the Stretchbar Bars as shown.
MID POWER POLE SUPPORT PLATE

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 12 of 18
HABN_223b
3.1
3.5
3.13
3.14
3.3
3.7
3.8
3.9
NOTE: Parts of the Frame are
hidden for Illustration Purpose.
NOTE: Please Refer to Specificstion Drawing to
mount the correct side Cover Assembly.
3.2
3.15
3.93.9
3.6
ATTACH MID GABLE SUPPORT BRACKET
STEP 11: Secure the Brackets and Cover Plates to Side Cover Assemblies and Front Cover as
Shown.
STEP 12: Mount Side Cover Assembly onto the Stretcher Bar as shown.
MOUNT SIDE COVER ASSEMBLY

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 13 of 18
HABN_223b
NOTE: Electrics components to be
installed on Cable Channel before
connecting to support Bracket. Please refer
to Installation Guide 321a, 321b, 322a,
322b for corresponding Electric installation.
NOTE:Install Cable Channel Cover Plate on Cable Channel
Where E-Chain is not specified or unused location.
1.6
Power Module Cover
Receptacle Outlet
Power Harness
NOTE: Electrics are not included
with the Cable Channel.
1.7
1.8
1.5
?
SECURE SIDE COVER ASSEMBLY
STEP 13: Secure Side Cover Assembly onto Stretcher Bar with Bolts. Do it on both Sides. NOTE: Electrics components to be installed on Cable Channel before connecting to Support
Bracket. Please refer to Installation Guide 321a, 321b, 321c,322a or 322b for corresponding
Electrics
installation.
CABLE CHANNEL ASSEMBLY

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 14 of 18
HABN_223b
1.4
NOTE: Electrics Components to
be installed on Cable Channel
before connecting to support
Bracket. Please refer to Installation
Guide321a, 321b, 322a, 322b for
Corresponding Electric installation.
Underside View
ATTACH CABLE CHANNEL & CENTER RAIL
STEP 14: Align holes on Support Brackets, Cable Channel Assembly. Insert Bolts inside
Centre Rail Extrusion through Cable Channel Assembly and Brackets as shown
STEP 15: Secure Cable Channel in place with Nuts
SECURE CABLE CHANNEL

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 15 of 18
HABN_223b
Sectrion View
STEP 16: Mount Front Covers onto the Frame Link and Bottom connecting Brackets.
MOUNT FRONT COVER ASSEMBLY

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 16 of 18
HABN_223b
3.4
NOTE: Parts of the Frames are
hidden for Illustartion Pupose.
3.4
NOTE: Parts of the Frames are
hidden for Illustartion Pupose.
STEP 17a: If Mid Gable Power Pole is specified. Attach Top Covers onto the Highlighted extrusions on the Side and Front Cover assemblies as shown.
Repeat Step 1-15 Install End Gable and Cable Channel on another side of the Table.
TOP COVER W/ POWER POLE CUTOUT (OPTIONAL)

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 17 of 18
HABN_223b
NOTE: Parts of the Frames are
Hidden for Illustration Purpose.
3.16
STEP 17b: Rest Top Covers onto Gable structures as Shown.
ATTACH TOP COVER

Section:
Date: May 2020
SOLID GABLES & CABLE CHANNEL
height-adjustable bench
Installation Guides
Page: 18 of 18
HABN_223b
STEP 18: Insert Center Rail Extrusion Caps onto Center Rail Extrusion as Shown.
CENTER RAIL EXTRUSION CAP