TeleEye RX324_V3 User manual

RX Series
Video Recording Server
RX324v3 / RX328v3 / RX3216v3
RX364v3 / RX368v3 / RX3616v3
Quick Start Guide
Version 1.04

Contents
1.Introduction.......................................................................................................................................1
1.1.Packages Contents..................................................................................................................1
1.2.Hardware Features..................................................................................................................2
1.3.Functional Features................................................................................................................5
1.4.Hard Disk Installation.............................................................................................................5
2.Local peration (CCTV / VGA Monitor).......................................................................................10
2.1.Setup for Local CCTV Monitor...........................................................................................10
2.2.Icons Description ( SD)......................................................................................................12
2.3.Menu verview ( SD)........................................................................................................12
2.4.View Live Video ( SD).......................................................................................................14
2.5.Recording ( SD)..................................................................................................................14
2.6.Playback ( SD)....................................................................................................................15
2.7.Footage Extraction ( SD)....................................................................................................15
3.Remote peration (Network)..........................................................................................................16
3.1.Network Configuration (Network).......................................................................................16
3.2.Icons Description (Network)................................................................................................16
3.3.Menu verview (Network)..................................................................................................19
3.4.Setup TCP/IP (Network)......................................................................................................19
3.5.View Live Video (Network).................................................................................................20
3.6.Recording (Network)............................................................................................................21
3.7.Playback (Network)..............................................................................................................22
3.8.Footage Extraction (Network)..............................................................................................22
4.Reference.........................................................................................................................................22
Notice:
Signal Communications Limited reserves the right to make improvements to the product described in this manual at
any time and without notice.
This manual is copyrighted. All rights are reserved. This manual should not be copied, reproduced or translated in
whole or part without prior consent from Signal Communications Limited.
TeleEye is a trademark of Signal Communications Limited and is registered in China, European Communities, Hong
Kong, US and other countries.
All other trademarks are the property of their respective owners.
Contents

Copyright (c) 2010 Signal Communications Limited (A member of TeleEye Group). All rights reserved. Release
Version 1.04
Limits of Liability and Disclaimer of Warranty
Signal Communications Limited has taken care in preparation of this manual, but makes no expressed or implied
warranty of any kind and assume no responsibility for errors or omissions. No liability is assumed for incidental or
consequential damages in connection with or arising out of the use of the information or accessories contained herein.
Features and specifications are subject to change without prior notice.
Contents

Quick Start Guide PAGE 1
1.Introduction
TeleEye RX Series Video Recording Server operates with its revolutionary multi-rate video
coder to fulfill the highest video coding requirements for simultaneous transmission and
recording. Seamless video transmission by TeleEye RX can be performed in low and medium
bandwidth communication networks including ADSL, ISDN and PSTN; whilst DVD-quality
videos can be transmitted through LAN and recorded into local hard drive with optimum speed at
100/120 fps at D1 resolution. Real time recording rate of up to 400/480fps on all video channels
can also be achieved at CIF resolution.
TeleEye RX provides professional and real life security control of premises with its
sophisticated event management scheme. It responses to a wide range of events triggered by
external alarm sensor, video motion, power interruption and tamper. There is an arm/disarm
control for the event management mechanism. Every external alarm input is configurable with an
individual entry/exit delay, fire zone and tamper detection setting. Various actions like sending
video back to a designated receiving PC, video recording, email notification, etc. can be
performed. TeleEye RX can also keep a comprehensive log of the events for audit trail.
TeleEye RX is designed to fully comply with the British Standard BS 8418:2003,
providing professional remote monitoring and visual alarm verification solution to central
monitoring station.
With a built-in DVD-writer, video footage stored inside TeleEye RX can be easily
extracted for evidential purposes. Recorded video can be backed up in DVD and played back in
any PC without any special software.
1.1. ackages Contents
After removing the package, make sure you have the following items:
Package contents Description Package contents Description
TeleEye RXv3
Video Recording
Server
Registration Code
Sheet
Quick Start Guide HDD
Recommendation
List
Packages Contents

Quick Start Guide PAGE 2
Package contents Description Package contents Description
Warranty Card HDD Screws
( nly for RX324v3,
RX328v3, RX3216v3)
Software CD Straight-through
Ethernet Cable
Power Adaptor Resistors (1.2kΩ x 20,
6kΩ x 20)
Alarm Port Connector
(37 Pins)
& Alarm Port Cover
Remote Control and
AAA Batteries
1.2.Hardware Features
1.2.1.Front View
Hardware Features

Quick Start Guide PAGE 3
1. Notification LEDs 2. Main control buttons
* only for RX328v3, RX368v3, RX3216v3 and RX3616v3
# only for RX3216v3 and RX3616v3
3.Menu control / Local playback control / PTZ control buttons
Buttons Menu Mode Playback Mode PTZ Mode
Cursor Up Pause Tilt Up
Cursor Down Stop Tilt Down
Cursor Left Rewind Pan Left
Cursor Right Forward Pan Right
Enter Play
Hardware Features

Quick Start Guide PAGE 4
1.2.2.Back View
RX3216v3 Model
1.Alarm / switch Port
2.VGA output
3.Audio In/ ut Port, PA
4.NC (Not available for use)
5.Video Input Connectors
6.Power on / off
7.Power input (12V DC)
8.RS 485 In/ ut Port
9.USB Port
10.Ethernet Socket (10/100 Base-T)
11.Video utput Connector
RX3616v3 Model
1.2.3.Remote Control
Remote control buttons
1.Show PTZ option menu
2.Number pad (for camera selection / data entry)
3.Next(+) / previous(-) page
4.Menu control / PTZ control
5.Back (for menu)
6.Screen mode
FULL QUAD 3x3 HEX
7.Local playback control buttons
Play / Pause Stop Rewind Forward
8.Start / stop recording
9.Backup (Footage extraction)
10.Event Status Menu
11.Menu
Hardware Features
2
11
10
8
5
9
7
3
4
1
6

Quick Start Guide PAGE 5
1.3.Functional Features
sureLINK, support both static and dynamic IP
Sophisticated event management
System arm/disarm
Flexible connections: LAN, ADSL, PSTN, ISDN, mobile network, etc.
Triplex operation: simultaneous video monitoring, recording & playback
Video motion detection
Event-driven recording
Pre- & post-event video recording
Entry/exit zone configurable on all alarm inputs
Auto alarm dialback (Not supported by RX328ND and RX3216ND)
Connection authentication
Compatibility with popular telemetry protocols
Single-site monitoring
Web-based video monitoring
Programmable video recording
Data retention
Mobile monitoring
1.4.Hard Disk Installation
1.Put the hard disk into the RXv3 video recording server and connect it to the cables.
For RX324v3, RX328v3 and RX3216v3
1.1 Take out the screws. 1.2 Pull up the cover.
Hard Disk Installation

Quick Start Guide PAGE 6
1.3 Put the HDD into the RXv3
1.4 Mount the HDD to holders with attached screws.
1.5 Insert the SATA cable to the HDD
Hard Disk Installation

Quick Start Guide PAGE 7
For RX364v3, RX368v3, RX3616v3,
TeleEye RXv3 video recording server supports SATA standard hard disk.
Hard Disk Front anel Description
Key Lock Description
Spring Lock Description
Hard Disk Installation
1. Key lock
2. Spring lock
3. LED indicator (for Power
& Access)

Quick Start Guide PAGE 8
Installation rocedure
RX MUST be shut down before installing / uninstalling hard disk
1.Press “Menu” button, select [S UT DOWN] option and press “Enter” button.
2.[S UT DOWN] menu will pop up and select [S UT DOWN] option and press “Enter”
button.
3.Select [YES] and press “Enter” button to confirm the shut down and wait for the message [IT
IS NOW SAFE TO TURN OFF].
4.Switch off RX.
5.Insert the bundled key provided into the
keyhole and turn the key clockwise (position B).
6.Pull the spring lock to open the front door.
Hard Disk Installation

Quick Start Guide PAGE 9
7.Place the HDD into the cartridge with the hard
drive label (printed) side up and be sure the
HDD connector side is properly inserted into the
cartridge.
8.Close the front door.
9.Insert the bundled key provided into the
keyhole and turn the key anti-clockwise
(position A).
Hard Disk Installation

Quick Start Guide PAGE 10
2.Local Operation (CCTV / VGA Monitor)
2.1.Setup for Local CCTV Monitor
When you observe video from CCTV monitor or VGA monitor, icons may be shown on the video
Connection Topology
Equipment
TeleEye RXv3 Video recording server
Cameras
Video Cables (RG-59) with BNC Header
CCTV Monitor
Setup for Local CCTV Monitor

Quick Start Guide PAGE 11
Setup rocedure
1.Connect cameras to TeleEye RXv3 {Video Input} with RG59 cable and BNC connector.
Note: The camera system is either NTSC or PAL and all cameras must have the SAME
system format.
2.Connect CCTV monitor to TeleEye RXv3 {Video Output} with RG59 cable and BNC
connector.
3.Install and use the bundled key to lock the { ard Disk Rack} with hard disk to the TeleEye
RXv3.
Note: If there is no hard disk installed, Recording and layback are not functional
4.Plug in the power adapter (12V DC) to TeleEye RXv3.
5.Turn on the power of TeleEye RXv3, camera and monitor. Check the {Power LED} which is
lit up in blue color continuously at TeleEye RXv3 front panel after power on. After several
seconds, live video appears on the CCTV monitor as follows:
Note: lease go through the following steps (6-10) if CCTV monitor does not show video clearly
Setup for Local CCTV Monitor

Quick Start Guide PAGE 12
2.2.Icons Description (OSD)
When you observe video from CCTV monitor or VGA monitor, icons may be shown on the video.
Each of the icons has special meaning. Please find their meanings from the table summary in next
page.
Icon Representation
Alarm event
Motion event
Video loss event
Disk usage alert
Recording
HDD available event
Schedule recording
Audio channel 1
Audio channel 2
Icon Representation
Playback
Pause in playback
Forward in playback
Backward in playback
Fast forward in playback
Fast backward in playback
Step forward in playback
Step backward in playback
2.3.Menu Overview (OSD)
OSD Menu Overview
➔Setup
1.Video
•Camera Setting
•Local Monitoring
•VGA Setting
•SD Color
•Video Format
•Sensitivity Boost
2.Audio
•Audio CH 1 Installed
•Audio CH 2 Installed
•PA Installed
3.Recording
•Recording Mode
•Custom Frame Rate
•Disk Mode
•Quality
•Image Size
•Recording Audio Channel
•Audio Quality
•Schedule Recording
•Recording Retention
•Recover Recording
4.Switches
5.Date / Time
•Time Sync Enabled
•Time Zone
•Date
•Time
•PRI Time Server
•SEC Time Server
•DNS Setting
•Update Date / Time
•Status
6.Connection
•TCP / IP
•3G USB Modem
•Throughput
Menu verview ( SD)

Quick Start Guide PAGE 13
•IP Filtering
7.Event Handler
•ARM / DISARM
•Security Switch
•Alarm
•Motion
•Video Loss
•System Tamper
•Power Failure
•Disk Usage
•HDD Available
8.Server
•Server Name
•Registration Checking
•Build-in Web Server
•External Keyboard
•Password Protection Level
•Upgrade
•Maintenance Log Backup
9.Password
10.User Account
•Security Mode
•Add Account
•Modify Account
•Power n Default Right
11.Setting Import / Export
•Import From USB
•Export To USB
12.Restore Factory Setting
➔Footage Backup
1.Backup To DVD
2.Backup To USB Flash
➔Live Audio Channel
➔Switch Control
➔Scan / Format Disk
1.Scan Disk
2.Format Disk
3.Format USB Flash
➔Server Information
1.Server Name
2.Server IP
3.Model No.
4.Serial No.
5.Version
6.Security Mode
➔Lock Keys
1.Lock Keys
2.Auto Key Lock
➔User Log-In / ut
➔Language
➔Shut Down
OSD Event Menu Overview
➔Event Status
1.Clear Event
➔Event Log
1.Alarm Log
2.Motion Log
3.Video Loss Log
4.System Tamper Log
5.ARM DISARM Tamper Log
6.SECU. Switch Tamper Log
7.Power Failure Log
8.Disk Usage Log
9.HDD Available Log
➔Connection Log
➔Setting Log
➔peration Log
Menu verview ( SD)

Quick Start Guide PAGE 14
2.4.View Live Video (OSD)
1.Turn on your RXv3 video recording server and cameras
2.Turn on your monitor
3.Select screen mode and cameras by using main control panel buttons on RXv3 video recording
server or number pads and screen mode buttons on remote controller
FULL QUAD 3x3*HEX#Sequential screen mode
* only for RX328v3, RX368v3, RX3216v3 and RX3616v3
# only for RX3216v3 and RX3616v3
2.5.Recording (OSD)
2.5.1.Manual Recording
1.Press [Menu] button 

 [Setup] 

 select [RECORDING]
2.Set all the configurations needed
3.Press [Rec] button on the front panel
4.Select [START RECORDING]
5.During recording, press [Rec] button again for stopping it
2.5.2.Schedule Recording
1.Press [Menu] button 

 [Setup] 

 select [RECORDING]
2.Select [SC EDULE RECORDING]
3.Select the day by pressing [←
←←
←] or [→
→→
→] button on the front panel
4.Press on [OK] button to pop out PTI N menu and select [ADD] to add schedule
4.1.Normal recording
4.1.1. Set the [TYPE] to “REC”
4.1.2. Set the configurations
4.2.Motion recording
4.2.1. Please refer to (4. Reference) in this guide
Recording ( SD)

Quick Start Guide PAGE 15
5.Select [APPLY]
6.Press [Rec] button on front panel
7.Select [START SC EDULE RECORDING]
8.During schedule recording, press [Rec] button again for stopping it
2.6. layback (OSD)
1.Press [Search] button to pop up [RECORDING LOG]
2.Search log for playback (by 2.1 or 2.2)
2.1.View by log
2.1.1.Select [VIEW LOG]
2.1.2.Select a log by using [↑
↑↑
↑] or [↓
↓↓
↓] button on the front panel
2.1.3.Press [OK] button and select [PLAY]
2.2.Search by date or time
2.2.1.Select [SEARC DATE] to set date
2.2.2.Select [SEARC TIME] to set time
2.2.3.Select [SEARC ]
3.Press local playback control buttons on the RXv3 to control playback process
4.Press main control buttons on the RXv3 to change the view mode in local CCTV video playback
if needed
2.7.Footage Extraction (OSD)
1.Insert the USB flash device to the RXv3
2.Press [Menu] button 

 select [FOOTAGE BACKUP]
3.Set the mode for extraction
4.Set the start date, start time, backup period and backup max size
5.Select [START BACKUP]
6.Unplug the USB flash device after footage extraction finished
Footage Extraction ( SD)

Quick Start Guide PAGE 16
3.Remote Operation (Network)
3.1.Network Configuration (Network)
PC Requirements:
CPU: Intel Pentium Dual-Core 2.2GHz or above
Memory: 1GB or above
S: Windows XP or Windows Vista Home/Business
Other Requirements:
Java: Sun Microsystems Java 2 runtime Version 1.5.0 or above
IE: Windows Internet Explorer Version 6 or above
There are Ethernet and 3G networks. The following shows the configuration through Ethernet
network. For the 3G network configuration, please refer to (4. Reference) in this guide.
Configuration: Through Ethernet network
3.2.Icons Description (Network)
Icons Description (Network)