FURNITUREBOX ATLANTA 6 User manual

ATLANTA 6
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/atlanta-6
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from
the work area, small parts could cause
choking if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly.
In some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO PERSON MAXIMUM CAPACITY
100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 2
Place part [2], [4] and [5] down onto
a clear at surface. Carefully align
the base plate [6] onto part [2], [4]
and [5] and secure using xings and
Tighten using allen key B.
STEP 1
Carefully place the long
allen screw A and Metal
washers D into the two
holes of the frame [4] and
[2].
STEP 3
ATTENTION: With help, turn the
stand around. Carefully align the
connecting frame [3] with parts [2],
[4] & [5]. Secure using xings C and
D. Tighten using allen key.

www.furniturebox.co.uk
STEP 4
ATTENTION: With help,
place the table top [1],
upside down onto a clear at
surface. Carefully align the
table frame onto table top [1]
and secure using xings and
D. Tighten using allen key B.
STEP 5
ATTENTION: With help,
turn the table around to
complete assembly.
FULL ASSEMBLY INSTRUCTIONS

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.