Tenda O3 User manual

1
Long Range Outdoor Point to Point CPE
User Manual

i
Copyright Statement
© 2018 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and
product names mentioned herein are trademarks or registered trademarks of their respective holders. Copyright
of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda
Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form or by any means without the prior written permission of
Shenzhen Tenda Technology Co., Ltd.
Disclaimer
Pictures, images and product specifications herein are for references only. To improve internal design,
operational function, and/or reliability, Tenda reserves the right to make changes to the products without
obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability
that may occur due to the use or application of the product described herein. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information and
recommendations in this document do not constitute a warranty of any kind, express or implied.

ii
Preface
Thank you for choosing Tenda! Please read this user guide before you start.
This user guide applies to O1 and O3. In the following content, we take the figures and web UI of O3 as examples.
Conventions
The typographical elements that may be found in this document are defined as follows.
Item
Presentation
Example
Cascading menus
>
System > Live Users
Parameter and value
Bold
Set User Name to Tom.
Variable
Italic
Format: XX:XX:XX:XX:XX:XX
UI control
Bold
On the Policy page, click the OK button.
Message
“”
The “Success”message appears.
The symbols that may be found in this document are defined as follows.
Symbol
Meaning
This format is used to highlight information of importance or special interest. Ignoring this type of
note may result in ineffective configurations, loss of data or damage to device.
This format is used to highlight a procedure that will save time or resources.
Acronyms and Abbreviations
Acronym or Abbreviation
Full Spelling
AP
Access Point
ARP
Address Resolution Protocol
AES
Advanced Encryption Standard
CPE
Customer Premises Equipment
CCQ
Client Connection Quality
DHCP
Dynamic Host Configuration Protocol
DNS
Domain Name System
DDNS
Dynamic Domain Name Server

iii
Acronym or Abbreviation
Full Spelling
GMT
Greenwich Mean Time
IP
Internet Protocol
ICMP
Internet Control Message Protocol
TKIP
Temporal Key Integrity Protocol
LAN
Local Area Network
MAC
Media Access Control
PoE
Power Over Ethernet
P2MP
Point-to-MultiPoint
PVID
Port-based VLAN ID
RADIUS
Remote Authentication Dial In User Service
SSID
Service Set Identifier
TCP
Transmission Control Protocol
UDP
User Datagram Protocol
VLAN
Virtual Local Area Network
WAN
Wide Area Network
WLAN
Wireless Local Area Networks
WEP
Wired Equivalent Privacy
WPA-PSK
WPA-Preshared Key
WPA
Wi-Fi Protected Access
WMM
Wi-Fi multi-media

iv
Additional Information
For more information, search this product model on our website at http://www.tendacn.com.
Technical Support
If you need more help, contact us by any of the following means. We will be glad to assist you as soon as
possible.
Hotline
Global: (86) 755-27657180
Email
[email protected].cn
United States: 1-800-570-5892
Canada: 1-888-998-8966
Hong Kong: 00852-81931998
Website
http://www.tendacn.com
Skype
tendasz

v
Contents
1 Introduction.............................................................................................................................. 1
1.1 Overview............................................................................................................................. 1
1.2 Getting to Know Your Device .............................................................................................. 1
2 Application Scenario................................................................................................................. 7
2.1 ISP Hotspot Connection-WISP Mode.................................................................................. 7
2.2 CCTV Surveillance ............................................................................................................. 12
3 Web UI .................................................................................................................................... 20
3.1 Login ................................................................................................................................. 20
3.2 Logout............................................................................................................................... 22
3.3 Web UI Layout .................................................................................................................. 22
3.4 Common Buttons.............................................................................................................. 23
4 Quick Setup............................................................................................................................. 24
4.1 AP Mode ........................................................................................................................... 24
4.2 Client Mode ...................................................................................................................... 27
4.3 Universal Repeater Mode (Only for O3) ........................................................................... 31
4.4 WISP Mode ....................................................................................................................... 35
4.5 Repeater Mode (Only for O3) ........................................................................................... 39
4.6 P2MP Mode (Only for O3) ................................................................................................ 48
4.7 Router Mode (Only for O3)............................................................................................... 55
5 Status...................................................................................................................................... 58
5.1 System Status.................................................................................................................... 58
5.2 Wireless Status ................................................................................................................. 60
5.3 Statistics............................................................................................................................ 61
6 Network.................................................................................................................................. 67

vi
6.1 LAN Setup ......................................................................................................................... 67
6.2 MAC Clone ........................................................................................................................ 71
6.3 DHCP Server...................................................................................................................... 73
6.4 DHCP Client....................................................................................................................... 75
6.5 VLAN Settings.................................................................................................................... 76
7 Wireless .................................................................................................................................. 80
7.1 Basic.................................................................................................................................. 80
7.2 Advanced ........................................................................................................................ 106
7.3 Access Control ................................................................................................................ 109
8 Advanced .............................................................................................................................. 112
8.1 LAN Rate ......................................................................................................................... 112
8.2 Diagnose ......................................................................................................................... 114
8.3 Bandwidth Control (Only for O3).................................................................................... 121
8.4 Port Forwarding (Only for O3) ........................................................................................ 124
8.5 MAC Filter (Only for O3) ................................................................................................. 128
8.6 Network Service.............................................................................................................. 132
9 Tools...................................................................................................................................... 148
9.1 Date & Time.................................................................................................................... 148
9.2 Maintenance................................................................................................................... 150
9.3 Account........................................................................................................................... 155
9.4 System Log...................................................................................................................... 157
Appendix....................................................................................................................................... 158
A.1 FAQ ................................................................................................................................. 158
A.2 Default Parameters......................................................................................................... 161

1
1 Introduction
1.1 Overview
The Tenda outdoor point to point CPE is dedicated for WISP solutions and video surveillance in elevators, tower
cranes, apartments, factories, orchards, and scenic areas. Featured the built-in high-gain antennas, and the
refined exterior design, the device can be installed onto walls or poles, and offers strong and stable WiFi signals.
The industry grade waterproof and dustproof housing allows it to work properly even in harsh environments.
With auto-bridging technology, two CPEs can connect to each other automatically to make setup a breeze.
1.2 Getting to Know Your Device
1.2.1 Appearance of O1
LED Indicators
O1
LED Indicator
Status
Description
PoE/LAN
Solid on
The device is being powered properly, and no data is being transmitted.
Blinking
Data is being transmitted over the port.
Off
The device is not powered on.

2
LED Indicator
Status
Description
WiFi
Solid on
The wireless function is enabled, but no data is being transmitted.
Blinking
Data is being transmitted in a wireless manner.
Off
The wireless function is disabled.
LED1, LED2, LED3
(Signal Strength LED)
Solid on
Bridged successfully, and the device works in AP mode.
LED1, LED2 and LED3 are solid on: Perfect Signal
LED1 and LED2 are sold on, and LED3 is off: Good signal
LED1 is solid on, and LED2 and LED3 are off: Weak signal. Please adjust the
direction or location of the two devices.
Blinking
Bridged successfully, and the device works in Client mode.
Off
The device does not bridge to another peer AP.
Button and Ports
O1 O1
ID
Port/Button
Description
①
DC
Power Jack
Connect the included power adapter to this jack to supply power to the device.
②
Reset
Reset Button
After the device is powered on for 1 minute, hold down this button for about 7 seconds.
When all the LED indicators on the device light up, the device is restored factory settings.
⑥
.
①
.
②
③
⑤
.
④

3
ID
Port/Button
Description
③
PoE/LAN
It is used to supply power or transmit data.
To power on the device using PoE, connect this port to the PoE port of the included PoE
injector.
If the device is powered on using a DC power adapter, this port can be connected to a
switch.
④
/
Ethernet cable inlet.
⑤
/
Power cord inlet.
⑥
/
It is used to remove the cover.
Label
The label on the back panel of the device presents the login IP address, username and password and other
information of the device.
Product label
Label location